Abstract:Abstract The complex aero-thermal coupling between fluid and solid regions within high-pressure turbines makes it important to perform multidisciplinary design optimization of high-pressure turbine blades. However, most published works failed to consider the correlations between blade profiles and cooling structures that could best compromise the aerodynamic and thermal performance of high-pressure turbine blades, and the related optimization problems were so far limited to single- or bi-objective ones. The critical drawbacks of these available studies are mainly due to the reduced accuracies of the adopted methods when dealing with large numbers of design variables and objectives. To tackle these difficulties, a dimension reduction-based multidisciplinary design optimization method is proposed and validated through an aero-thermal design optimization of the NASA-C3X vane with a total of 39 design variables and five performance objectives. The main novelties of this proposed method lie in a hybrid dimension reduction of design space by means of the proper orthogonal decomposition and global sensitivity analysis methods, as well as the integration of the ensemble surrogate model and the reference vector evolutionary algorithm for optimal solutions. The results show that the prediction accuracy of the ensemble surrogate model for each performance objective is enhanced, even though the dimensionalities of design space are reduced. Complicated compromises exist among the five performance objectives under consideration. For NASA-C3X vane, the optimal design helps reduce irreversible flow losses especially wake losses while reducing the volumes with high-temperature and high-temperature gradient near the trailing edge is mainly responsible for the reduced irreversible losses due to heat transfer. The outcomes of this work are particularly relevant for the advanced design optimization methods for high pressure turbines.

Multidisciplinary Design Optimization of the Composite Cooling Structure for Nickel-based Alloy Turbine Blade

Design optimization of composite wind turbine blades considering tortuous lightning strike and non-proportional multi-axial fatigue damage

Transpiration Cooling of High Pressure Turbine Vane with Optimized Porosity Distribution

A cooled turbine blade design and optimization method considering the cooling structure influence

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Thermal-Fluid-Solid Coupling Analysis on the Temperature and Thermal Stress Field of a Nickel-Base Superalloy Turbine Blade

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Topological Structure Optimization of Finite Element based on Modal Analysis about Steam Turbine Blade

A Dimension Reduction-Based Multidisciplinary Design Optimization Method for High Pressure Turbine Blades

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Cooling Structure Optimization For A Rib-Roughed Channel In A Turbine Rotor Blade

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Multi-Dimensional Platform For Cooling Design Of Air-Cooled Turbine Blades

Coupled Aerothermodynamics Optimization for the Cooling System of a Turbine Vane

The mechanical characteristics and cooling performance of a turbine blade with non-homogeneous lattice structure

Multi-Objective Optimization of Turbine Blade Tip With Film Cooling Holes

Development of Numerical Simulation in Nickel-Based Superalloy Turbine Blade Directional Solidification

Multidisciplinary design optimization on the splitter blade of high head Francis turbine

Three-Dimensional Aerodynamic Optimization of Turbine Blade Profile Considering Heat Transfer Performance

A rapid multidisciplinary life optimization method for turbine blades with a large number of film cooling holes