Abstract:High sensitivity and reliable selectivity are the main requirements for gas sensors to be applied in portable devices, especially for semiconducting metal oxide (SMO)-based gas sensors. However, SMO-based sensors suffer from insufficient selectivity, which limits their practical applications. In this work, a high-performance N-O2 sensor based on a self-assembled monolayer-modified semiconducting metal oxide is presented. Controllable porous WO3 nanotubes with an ultrathin wall thickness are prepared through a new and simple method by using electrospun fibres as a sacrificial template followed by a facile soaking process, providing a large surface area and fast transport pathway for gas molecules. Through the introduction of 3-aminopropyltriethoxysilane (APTES), which acts as an electron acceptor on the surface, the as-designed sensor exhibited a highly improved response compared to that based on bare WO3 nanotubes due to the specific interaction between APTES and NO2. Importantly, the detection limit of the as-prepared sensor approaches 10 ppb, which is the lowest detection limit of all WO3-based NO2 sensors to date. In addition, it shows a very fast response and recovery time with a high response value, maintaining 80% of the initial response, even in a saturated humid environment, due to the hydrophobic group of APTES. The optimized sensor was successfully used for the real-time detection of NO2 in the daytime under different air quality conditions, even in a heavily polluted environment. These results provide a model platform to achieve a simple, inexpensive sensor design with a high recognition capability.

Effect of noble metal element on microstructure and NO<sub>2</sub> sensing properties of WO<sub>3</sub> nanoplates prepared from a low-grade scheelite concentrate

Ppb-level NO<sub>2</sub> sensing properties of Au-doped WO<sub>3</sub> nanosheets synthesized from a low-grade scheelite concentrate

Synthesis and in-situ noble metal modification of WO3 center dot 0.33H(2)O nanorods from a tungsten-containing mineral for enhancing NH3 sensing performance

Synthesis and in-situ noble metal modification of WO3·0.33H2O nanorods from a tungsten-containing mineral for enhancing NH3 sensing performance

Enhanced Nitrogen Oxide Sensing Performance Based on Tin-Doped Tungsten Oxide Nanoplates by a Hydrothermal Method.

Microwave Intercalation Synthesis of WO3 Nanoplates and Their NO-Sensing Properties

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Mesostructured WO3 as a sensing material for NO2 detection

Preparation of 2 Nm Tungsten Oxide Nanowires Based on Two-Phase Strategy and Their Ultra-Sensitive NO2 Gas Sensing Properties

In situ etching WO3 nanoplates: Hydrothermal synthesis, photoluminescence and gas sensor properties

Influence of Synthesis Conditions on Microstructure and NO2 Sensing Properties of WO3 Porous Films Synthesized by Non-Hydrolytic Sol–Gel Method

Bimetallic Au/Pd Nanoparticles Decorated ZnO Nanowires for NO2 Detection

Excellent NO2 gas sensor based on the oxygen inhibiting effect of Ni3+-doped WO3

Enhanced NO2 sensing properties of Pt/WO3 films grown by glancing angle deposition

P1.7.9 Highly Sensitive NO2 Sensor Based on Monodispersed WO3 Nanoparticles

Effect of au doped WO3 gas sensors for NO2 detection

Double-platelet Pd@ZnO microcrystals for NO 2 chemical sensors: their facile synthesis and DFT investigation.

Preparation of Ag-Loaded Mesoporous Wo3 and Its Enhanced No2 Sensing Performance

Pd@Pt Core-Shell Nanocrystal-Decorated ZnO Nanosheets for ppt-Level NO2 Detection

APTES-functionalized Thin-Walled Porous WO3 Nanotubes for Highly Selective Sensing of NO2 in a Polluted Environment

Highly Sensitive NO2 Sensor Based on Square-Like Tungsten Oxide Prepared with Hydrothermal Treatment