Abstract:By using photovoltaic technology, ambient solar light can be directly converted to electricity. The photovoltaic technology has been regarded as one of the most important and promising strategies to resolve the worldwide energy and pollution problems. As one type of photovoltaic technology, polymer solar cells have attracted increasing interest due to their advantages of solution processing capability, low-cost, feasibility to be fabricated on flexible substrates etc. Not until a few years ago, the fullerene derivatives had been dominated the organic photovoltaic field as the most promising acceptor materials for polymer solar cells. However, fullerene-based polymer solar cells have a power conversion efficiency bottleneck due to the relatively fixed energy levels as well as the fixed bandgaps of fullerene derivatives. Therefore, researchers started to develop nonfullerene acceptors which can be used as alternatives to replace the traditional fullerene derivatives. Compared to the fullerene derivatives, nonfullerene acceptors offer several advantages such as stronger light absorption, tunable bandgaps and frontier molecular orbital energy levels. For nonfullerene acceptors, a ladder-type fused ring is usually used as the central core which is an essential building block to tailor the bandgaps and energy levels. Although many fused ring systems have been explored for efficient nonfullerene acceptors, ladder-type angular-shape dithienonaphthalene is seldom reported as the donor unit for nonfullerene acceptors. Furthermore, the impact of thiophene bridge on the optical and photovoltaic properties of the dithienonaphthalene-based nonfullerene acceptors has never been reported. In this context, we report on the design and synthesis of a dithienonaphthalene-based small-molecule acceptor which contains thiophene bridges in between the acceptor terminals and the fused-ring donor core. Compared to the dithienonaphthalene-based small-molecule without the thiophene bridges, the resulting acceptor (DTNIT) exhibits a reduced bandgap of 1.52 eV which makes it more suitable to be blended with the benchmark large bandgap copolymer, poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b: 4,5-b']clithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c]dithiophene-4,8-dione)] (PBDB-T). The reduced band-gap of the resulting nonfullerene acceptor can be attributed to its extended pi-conjugation in comparison with the dithienonaphthalene-based acceptor without the thiophene bridges. Inverted polymer solar cells with a device configuration of indium tin oxide/ZnO/PBDB-T:DTNIT/MoO3/Ag were fabricated and characterized. Polymer solar cells based on PBDB-T:DTNIT showed an open circuit voltage of 0.91 V, an enhanced short circuit current of 14.42 mAcm(-2), and a moderate PCE of 7.05% which is comparable to the PCE of 7.12% for the inverted device based on PBDB-T:PC71BM. Our results not only provide a method to synthesize efficient nonfullerene acceptors with reduced bandgaps, but also offer a bandgap modulation strategy for nonfullerene acceptors.

A high-performance non-fullerene electron acceptor with bisalkylthiothiophene pi-bridges for organic photovoltaics

Hybrid Nonfused Electron Acceptors with Perylene Diimide Pendants for Organic Solar Cells

An Electron Acceptor With Broad Visible-Nir Absorption And Unique Solid State Packing For As-Cast High Performance Binary Organic Solar Cells

Mapping Nonfullerene Acceptors with a Novel Wide Bandgap Polymer for High Performance Polymer Solar Cells

Bandgap Modulation of Dithienonaphthalene-Based Small-Molecule Acceptors for Nonfullerene Organic Solar Cells

Dithienopicenocarbazole-Based Acceptors For Efficient Organic Solar Cells With Optoelectronic Response Over 1000 Nm And An Extremely Low Energy Loss

A nonfullerene acceptor incorporating a dithienopyran fused backbone for organic solar cells with efficiency over 14%

Fused selenophene-thieno[3,2-b]thiophene-selenophene (ST)-based narrow-bandgap electron acceptor for efficient organic solar cells with small voltage loss.

Fully-unfused electron acceptors based on a steric boron dipyrromethene (BODIPY) core for organic solar cells

Nonfullerene Acceptor with “donor–acceptor Combined Π-Bridge” for Organic Photovoltaics with Large Open-Circuit Voltage

A new non-fullerene acceptor based on an asymmetric electron-deficient core for indoor organic photovoltaic cells

High‐Efficiency Organic Solar Cells Based on a Low‐Cost Fully Non‐Fused Electron Acceptor

Low-bandgap non-fullerene acceptors based on selenophene π spacer and alkylated indaceno[1,2-b:5,6-b′]dithiophene for organic solar cells

Molecular Design of Fully Nonfused Acceptors for Efficient Organic Photovoltaic Cells

A Narrow Band Gap Non-Fullerene Electron Acceptor Based on a Dithieno-3,2-b:2′,3′-Dlpyrrole Unit for High Performance Organic Solar Cells with Minimal Highest Occupied Molecular Orbital Offset

Simple Non‐Fused Electron Acceptors Leading to Efficient Organic Photovoltaics

Non-fused medium bandgap electron acceptors for efficient organic photovoltaics

Nonfused Electron Acceptors Based on the 2D-Extended Quinoxaline Core for Organic Solar Cells

Towards High-Efficiency Non-Fullerene Organic Solar Cells: Matching Small Molecule/polymer Donor/acceptor

An Ortho‐Bisalkyloxylated Benzene‐Based Fully Non‐fused Electron Acceptor for Efficient Organic Photovoltaic Cells

Narrow Bandgap Non-Fullerene Acceptor Based on a Thiophene-Fused Benzothiadiazole Unit with a High Short-Circuit Current Density of over 20 Ma Cm−2