Abstract:A temperature-compensated fiber Bragg grating (FBG) axial strain sensor based on a two-dual-loop optoelectronic oscillator (OEO) with the enhanced Vernier effect is proposed and experimentally demonstrated. The sensing head consists of two cascaded FBGs, one of which acts as a sensing FBG to measure both the axial strain and temperature and the other as a reference FBG to detect temperature. Acting as the optical carrier, the reflected optical signal of the sensing head is divided into two paths with opposite dispersion coefficients and slightly different lengths to achieve an enhanced Vernier effect. After being divided by a wavelength division multiplexer, the optical signal launches into two electrical paths with different electrical bandpass filters (EBPFs) for frequency division multiplexing. The EBPF I selects the microwave signal generated by the sensing FBG, while the EBPF II selects the microwave signal generated by the reference FBG. Therefore, the axial strain and temperature can be recovered by recording the microwave frequency within EBPF I, and the temperature can be interrogated by tracking the microwave frequency within EBPF II. The axial strain applied on the sensing FBG can be distinguished by solving the cross-sensitivity matrix. The results show that the sensitivity of the dual-loop OEO is much greater than that of the single-loop OEO. The maximum measurement error for the axial strain is 0.112µε, and the maximum temperature compensation error is as low as 0.024°C in the dual-loop OEO, which is far less than that in the single-loop OEO. The enhanced Vernier effect not only improves the sensitivity, but also reduces the temperature compensation error.

High-precision Strain-Insensitive Temperature Sensor Based on an Optoelectronic Oscillator

High-Sensitivity Temperature Sensor Based on an Optoelectronic Oscillator

High-precision Thermal-Insensitive Strain Sensor Based on Optoelectronic Oscillator

A Temperature Sensor Based on A Brillouin Optoelectronic Oscillator

An Optoelectronic Oscillator‐based Strain Sensor with Extended Measurement Range

High-precision temperature-compensated fiber Bragg grating axial strain sensing system based on a dual-loop optoelectronic oscillator with the enhanced Vernier effect

Highly Sensitive Demodulation of a Vibration-Induced Phase Shift Based on a Low-Noise OEO.

A Temperature Insensitive Load Sensor Based On A Dual Loop Optoelectronic Oscillator

A Wideband Tunable Optoelectronic Oscillator Based on a Spectral-Subtraction-Induced MPF

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

Optical Temperature Sensor Based On Zno Thin Film'S Temperature-Dependent Optical Properties

Ultrahigh‐Resolution Optical Fiber Thermometer Based on Microcavity Opto‐Mechanical Oscillation

High Precision Temperature Insensitive Strain Sensor Based on Fiber-Optic Delay

An Optical Orthogonal Heterodyne Demodulation Technology for Interferometric Fiber-optic Sensor

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Fiber Bragg grating sensor interrogation system based on an optoelectronic oscillator loop

Highly Sensitive Optoelectronic Oscillator-Based FBG Sensor via Coarse Sampling and Vernier Effect

A Wideband Frequency-Tunable Optoelectronic Oscillator Based on a Narrowband Phase-Shifted FBG and Wavelength Tuning of Laser

Wideband Tunable Optoelectronic Oscillator Based on the Deamplification of Stimulated Brillouin Scattering.

Microwave Photonic Temperature Sensing Based on Fourier Domain Mode-Locked OEO and Temperature-to-Time Mapping