Abstract:The removal of crude oil from spent hydrodesulfurization catalysts constitutes the preliminary stage in the recovery process of valuable metals. However, the traditional roasting method for the removal exhibits massive limitations. In view of this, the present study used an ultrasound -assisted surfactant cleaning method to remove crude oil from spent hydrodesulfurization catalysts, which demonstrated effectiveness. Furthermore, the study investigated the mechanism governing the process with calculation and experiments, so as to provide a comprehensive understanding of the cleaning method ' s efficacy. The surfactant selection was predicated on the performance in the IFT test, with SDBS and TX -100 finally being chosen. Subsequent calculations and analysis were then conducted to elucidate their frontier molecular orbitals, electrostatic potential, and polarity. It has been found that both SDBS and TX -100 possess the smallest LUMO-HOMO energy gap ( Delta E), registering at 4.91 eV and 4.80 eV, respectively, and presenting the highest interfacial reactivity. The hydrophilic structure in the surfactant regulates the wettability of the oil -water interface, and the long -chain alkanes have excellent nonpolar properties that promote the dissolution of crude oil. The ultrasonic -assisted process further improves the interface properties and enhances the oil removal effect. Surprisingly, the crude oil residue was reduced to 0.25% under optimal conditions. The final phase entailed the techno-economic evaluation of the entire process, revealing that, in comparison to the roasting method, this process saves $0.38 per kilogram of spent HDS catalyst, with the advantages of operational simplicity and emission -free. Generally, this study shed new light on the realization of efficient oil removal, with the salience of green, sustainable, and economical.

Application of the Three-Reactor Hydrogenation Process in the Recycling Utilization of Waste Lubricating Oil and Study on the Catalyst Deactivation Mechanism

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Sustainable recovery of surface-deposited oils and valuable metals from uncrushed spent hydroprocessing catalysts

The Enhancement on the Waste Management of Spent Hydrotreating Catalysts for Residue Oil by a Hydrothermal–hydrocyclone Process

Cyclonic Gas Stripping Deoiling and Gas Flow Acceleration Classification for the Resource Utilization of Spent Catalysts in Residue Hydrotreating Process

Oil Removal of Spent Hydrotreating Catalyst Como/Al2o3 Via A Facile Method with Enhanced Metal Recovery

Recovery and value-added utilization of critical metals from spent catalysts for new energy industry

Regeneration of Catalysts for Hydrotreating of Residual Oil

Deactivation and Regeneration of Catalyst for Steam Reforming of Bio-Oil to Produce Hydrogen

Mechanism of Highly Efficient Oil Removal from Spent Hydrodesulfurization Catalysts by Ultrasound-Assisted Surfactant Cleaning Methods

Hydrotreating a Waste Engine Oil and Scrap Tire Oil Blend for Production of Liquid Fuel

Study on the deactivation of Ni-based catalyst in the hydrotreating process of waste plastic pyrolysis oil

Engineering Dual Bed Hydrocracking Catalyst Towards Enhanced High-Octane Gasoline Generation from Light Cycle Oil

The optimization of heterogeneous catalytic conditions in the direct alkylation of waste vegetable oil

Oil Removal from Spent HDT Catalyst by an Aqueous Method with Assistance of Ultrasound

Commercial Application of SRH Liquid Products Recycling Hydrogenation Technology in Producing Clean Diesel

Cleaner recycling of spent Ni–Mo/γ-Al2O3 catalyst based on mineral phase reconstruction

Opportunities for utilizing waste cooking oil in crude to petrochemical process: Novel process design, optimal strategy, techno-economic analysis and life cycle society-environment assessment

Towards sustainability: A novel process for recycling vanadium and molybdenum from waste hydrogenation catalysts

Influence of Partial Incineration and Optimized Acid Leaching on the Remanufacturing of Ni–Mo/γ–Al2O3 Catalysts

In-Situ Decontamination of Heavy Metal Containing Wastewater from Oil Refineries into Catalyst for Polycyclic Aromatic Hydrocarbons Hydrogenation Coupled with Water-Gas Shift Reaction