Abstract:For recent lithium-ion batteries (LIBs), there have been lots of researches about convert liquid-phase electrolyte to solid-state electrolyte (i. e. all-solid-state battery) to improve safety and stability. Solid-state electrolyte materials have to satisfy some criteria including high ionic conductivity at room-temperature, chemical stability against reducing environment, and mechanical strength. Many solid-materials for electrolyte have been researched, including perovskite, garnet, and sulfide-type of materials. Among them, garnet-type based lithium lanthanum zirconium oxide (LLZO, Li 7 La 3 Zr 2 O 12 ) has been received attention due to its high ionic conductivity (~10 -4 S/cm at room temperature) and wide electrochemical stability window (~6 V versus Li/Li + ). The main issue of LLZO is the high interfacial resistance with anode and cathode materials such as Li metal and LiCoO 2 . Many researchers have tried to understand the cause of this interfacial resistance for LLZO. K. Park et al. researched about the cathode/electrolyte (LLZO) interface and revealed co-diffusion and second-phase formation of LLZO at high-temperature [1]. M. Zarabian et al. reported that spin-coated LLZO on the LiCoO 2 pellet fabricated at low-temperature (~400 o C) and co-diffusion of La and Co at the interface by using X-ray photoelectron spectroscopy (XPS) [2]. They commonly suggested that elevated temperature make chemical interaction and this make high interfacial resistance. In this study, we adopted novel sintering method, flash light annealing (FLA) process, to fabricate LLZO solid-electrolyte. This method is also called rapid, cool sintering because of its unique characteristics compared to conventional sintering methods [3]. FLA uses instantaneous high current to generate intensive pulsed light (IPL), and irradiate IPL toward the specimen to sinter the materials. Unlike the conventional sintering methods, this novel method has lots of advantages including availability of treatment at STP and fast sintering time (~ a few ms). Rapid sintering process gives no time for the diffusion at the interface, thus the interfacial resistance between cathode and LLZO solid-electrolyte must be reduced. We fabricated LLZO solid-electrolyte on the commercial LiCoO 2 pellet by using solution-based spin-coating method and sintered the film by using FLA method. XPS and energy-dispersive X-ray spectroscopy (EDX) analysis were conducted to observe interface and diffusion of La and Co elements. Also, X-ray diffraction (XRD) method was used to investigate sintering ability of FLA through crystallinity development. The interfacial resistance between LiCoO 2 and LLZO solid-electrolyte was analyzed by electrochemical impedance spectroscopy (EIS) through cross-plane set-up.

Scalable Freeze Tape Casting Fabrication and Pore Structure Analysis of 3D LLZO Solid-State Electrolytes.

Oriented Porous LLZO 3D Structures Obtained by Freeze Casting for Battery Applications

A Novel Aqueous-based Gelcasting Process to Fabricate Li6.4La3Zr1.4Ta0.6O12 Solid Electrolytes

A Highly Ion-Conductive Three-Dimensional LLZAO-PEO/LiTFSI Solid Electrolyte for High-Performance Solid-State Batteries

Enhanced electrochemical performance of solid PEO/LiClO4 electrolytes with a 3D porous Li6.28La3Zr2Al0.24O12 network

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

Fluorine-Doped Li 7 La 3 Zr 2 O 12 Fiber-Based Composite Electrolyte for Solid-State Lithium Batteries with Enhanced Electrochemical Performance

Isomeric Li–La–Zr–O Amorphous–Crystalline Composite Thin-Film Electrolytes for All-Solid-State Lithium Batteries

Porous film host-derived 3D composite polymer electrolyte for high-voltage solid state lithium batteries

Composite Polymer Electrolyte with Vertically Aligned Garnet Scaffolds for Quasi Solid-State Lithium Batteries

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

A Simple and Highly Efficient Method toward High-Density Garnet-Type LLZTO Solid-State Electrolyte

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Three-dimensional Structured Asymmetric Electrolytes for High Interface Stability and Fast Li-ion Transport in Solid-State Li-metal Batteries

Robust and Manufacturable Lithium Lanthanum Titanate-Based Solid-State Electrolyte Thin Films Deposited in Open Air

Ammonium fluoride induced barrier-free and oxygen vacancy enhanced LLZO powder for fast interfacial lithium-ion transport in composite solid electrolytes

Magnesium Fluoride Interlayers Enabled by Wet‐Chemical Process for High‐Performance Solid‐State Batteries

Developing Preparation Craft Platform for Solid Electrolytes Containing Volatile Components: Experimental Study of Competition between Lithium Loss and Densification in Li7La3Zr2O12

Sheet-like garnet structure design for upgrading PEO-based electrolyte

A Study on Cathode Interface of Li-La-Zr-O Solid-State Electrolyte Fabricated Via Rapid Sintering Process

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries