Abstract:In this study, we synthesized four acceptor-donor-acceptor type hole-transporting materials (HTMs) of SY1-SY4 for an HTMs/interfacial layer with carbazole as the core moiety and ester/amide as the acceptor unit. These HTMs contain 4-hexyloxyphenyl substituents on the carbazole N atom, with extended π-conjugation achieved through phenylene and thiophene units at the 3,6-positions of the carbazole. When using amide-based HTMs SY2 as a dopant-free HTM in a p-i-n perovskite solar cell (PSC), we achieved a power conversion efficiency (PCE) of 13.59% under AM 1.5G conditions (100 mW cm-2); this PCE was comparable with that obtained when using PEDOT:PSS as the HTM (12.33%). Amide-based SY2 and SY4 HTMs showed a larger perovskite grain than SY1 and SY3 because of the passivation of traps/defects at the grain boundaries and stronger interaction with the perovskite layer. In further investigation, we demonstrated highly efficient and stable PSCs when using the dopant-free p-i-n device structure indium tin oxide/NiOx/interfacial layer (SY-HTMs)/perovskite/PC61BM/BCP/Ag. The interfacial layer improved the PCEs and large grain size (micrometer scale) of the perovskite layer because of defect passivation and interface modification; the amide group exhibited a Lewis base adduct property coordinated to Ni and Pb ions in NiOx and perovskite, bifacial defect passivation and reduced the grain boundaries to improve the crystallinity of the perovskite. The amide-based SY2 exhibited the stronger interaction with the perovskite layer than that of ester-based SY1, which is related to the observations in X-ray absorption near edge structure (XANES). The best performance of the NiOx/SY2 device was characterized by a short-circuit current density (Jsc) of 21.76 mA cm-2, an open-circuit voltage (Voc) of 1.102 V, and a fill factor of 79.1%, corresponding to an overall PCE of 18.96%. The stability test of the PCE of the NiOx/SY2 PSC device PCE showed a decay of only 5.01% after 168 h; it retained 92.01% of its original PCE after 1000 h in Ar atmosphere. Time-resolved photoluminescence spectra of the perovskite films suggested that the hole extraction capabilities of the NiOx/SY-HTMs were better than that of the bare NiOx. The superior film morphologies of the NiOx/SY-HTMs were responsible for the performances of their devices being comparable with those of bare NiOx-based PSCs. The photophysical properties of the HTMs were analyzed through time-dependent density functional theory with the B3LYP functional.

Hexylammonium Iodide Derived Two-Dimensional Perovskite As Interfacial Passivation Layer in Efficient Two-Dimensional/Three-Dimensional Perovskite Solar Cells.

Manipulating the Interfacial Dipole Toward High-Performance Perovskite Solar Cells Via Conjugated Organic Ammonium

Effective Passivation with Size-Matched Alkyldiammonium Iodide for High-Performance Inverted Perovskite Solar Cells

Direct Surface Passivation of Perovskite Film by 4-Fluorophenethylammonium Iodide toward Stable and Efficient Perovskite Solar Cells

Improved Efficiency and Stability in 1,5-Diaminonaphthalene Iodide-Passivated 2D/3D Perovskite Solar Cells

Ionic Liquid‐Assisted Crystallization and Defect Passivation for Efficient Perovskite Solar Cells with Enhanced Open‐Circuit Voltage

Manipulated Crystallization and Passivated Defects for Efficient Perovskite Solar Cells via Addition of Ammonium Iodide

Accelerating Photogenerated Hole Tunneling through Passivation Layers via Reducing Interplanar Spacing for Efficient and Stable Perovskite Solar Cells

Highly Efficient and Stable Pure Two-Dimensional Perovskite-Based Solar Cells with the 3-Aminopropionitrile Organic Cation.

Perovskite Surface Passivation Using Thiophene-Based Small Molecules for Efficient and Stable Solar Cells

Managing Multiple Halide-Related Defects for Efficient and Stable Inorganic Perovskite Solar Cells

Organic iodides in efficient and stable perovskite solar cells: strong surface passivation and interaction

Enhancing Perovskite Solar Cell Performance through Propylamine Hydroiodide Passivation

Bulky ammonium iodide and in-situ formed 2D Ruddlesden-Popper layer enhances the stability and efficiency of perovskite solar cells

Managing Interfacial Defects and Carriers by Synergistic Modulation of Functional Groups and Spatial Conformation for High‐Performance Perovskite Photovoltaics based on Vacuum Flash Method

1,8‐Octanediamine Dihydroiodide‐Mediated Grain Boundary and Interface Passivation in Two‐Step‐Processed Perovskite Solar Cells

Surface defect passivation by 1,8-Naphthyridine for efficient and stable Formamidinium-based 2D/3D perovskite solar cells

Defect Passivation by Amide-Based Hole-Transporting Interfacial Layer Enhanced Perovskite Grain Growth for Efficient p-i-n Perovskite Solar Cells

Interfacial passivation with 2-aminopyridine for effective perovskite solar cells

In Situ Dual‐Interface Passivation Strategy Enables The Efficiency of Formamidinium Perovskite Solar Cells Over 25%

Gas Molecule Assisted All-Inorganic Dual-Interface Passivation Strategy for High-Performance Perovskite Solar Cells