Abstract:Visualinertial odometry (VIO) is known to suffer from drifting, especially over long-term runs. In this article, we present GVINS, a nonlinear optimization-based system that tightly fuses global navigation satellite system (GNSS) raw measurements with visual and inertial information for real-time and drift-free stateestimation. Our system aims to provide accurate global six-degree-of-freedom estimation under complex indooroutdoor environments, where GNSS signals may be intermittent or even inaccessible. To establish the connection between global measurements and local states, a coarse-to-fine initialization procedure is proposed to efficiently calibrate the transformation online and initialize GNSS states from only a short window of measurements. The GNSS code pseudorange and Doppler shift measurements, along with visual and inertial information, are then modeled and used to constrain the system states in a factor graph framework. For complex and GNSS-unfriendly areas, the degenerate cases are discussed and carefully handled to ensure robustness. Thanks to the tightly coupled multisensor approach and system design, our system fully exploits the merits of three types of sensors and is able to seamlessly cope with the transition between indoor and outdoor environments, where satellites are lost and reacquired. We extensively evaluate the proposed system by both simulation and real-world experiments, and the results demonstrate that our system substantially suppresses the drift of the VIO and preserves the local accuracy in spite of noisy GNSS measurements. The versatility and robustness of the system are verified on large-scale data collected in challenging environments. In addition, experiments show that our system can still benefit from the presence of only one satellite, whereas at least four satellites are required for its conventional GNSS counterparts.

VINS-Vehicle: A Tightly-Coupled Vehicle Dynamics Extension to Visual-Inertial State Estimator

VINS-PL-Vehicle: Points and Lines-based Monocular VINS Combined with Vehicle Kinematics for Indoor Garage

DP-VINS: Dynamics Adaptive Plane-Based Visual-Inertial SLAM for Autonomous Vehicles

Automated Vehicle Attitude and Lateral Velocity Estimation Using a 6-D IMU Aided by Vehicle Dynamics.

VINS-Mono: A Robust and Versatile Monocular Visual-Inertial State Estimator

P-VIDO: A Tightly-Coupled Vehicle Dynamics and Plane Priors Extension to Visual-Inertial State Estimator

LIO-Vehicle: A Tightly-Coupled Vehicle Dynamics Extension of LiDAR Inertial Odometry

Vehicle Sideslip Angle Estimation: Fusion of Vehicle Kinematics and Dynamics

Advancing Estimation Accuracy of Sideslip Angle by Fusing Vehicle Kinematics and Dynamics Information with Fuzzy Logic

G-VIDO: A Vehicle Dynamics and Intermittent GNSS-Aided Visual-Inertial State Estimator for Autonomous Driving

Vins-Mkf: A Tightly-Coupled Multi-Keyframe Visual-Inertial Odometry For Accurate And Robust State Estimation

A Robust Visual Inertial Navigation System Based on Low-cost Inertial Measurement Unit

DynaVINS++: Robust Visual-Inertial State Estimator in Dynamic Environments by Adaptive Truncated Least Squares and Stable State Recovery

GVINS: Tightly Coupled GNSS–Visual–Inertial Fusion for Smooth and Consistent State Estimation

DynaVINS: A Visual-Inertial SLAM for Dynamic Environments

ImPL-VIO: an Improved Monocular Visual-Inertial Odometry Using Point and Line Features

Vision-Aided Inertial Navigation System with Point and Vertical Line Observations for Land Vehicle Applications

RNIN-VIO: Robust Neural Inertial Navigation Aided Visual-Inertial Odometry in Challenging Scenes

UMS-VINS: United Monocular-Stereo Features for Visual-Inertial Tightly Coupled Odometry

A Novel Visual-Aided Method to Enhance the Inertial Navigation System of an Intelligent Vehicle in Indoor Environments

Automated Vehicle Sideslip Angle Estimation Considering Signal Measurement Characteristic