Abstract:With the rapid development of transportation, wayside condition monitoring and fault diagnosis of key acoustic sources has attracted considerable attentions because of low cost and high efficiency. However, serious Doppler distortion exists in the wayside acquired signals when the monitored moving source passes by the system at high velocity, which makes it difficult for condition monitoring and fault diagnosis. This paper presents a novel method involving short-time sparse singular value decomposition to eliminate Doppler distortion in the wayside acquired signals based on a microphone array. The procedure of the proposed short-time sparse singular value decomposition is performed as follows. First, the Doppler distorted array signals are decomposed into a series of array segments by a sliding window with a proper window length. Afterwards, the time-varying direction of arrival of the corresponding array segments is acquired by individual sparse singular value decomposition. Then the fitting time-varying directions of arrival and time-domain interpolation resampling are employed to correct the Doppler distorted signals for recovering the objective characteristic frequency. Simulation analysis has validated that under heavy background noise situation, better localization accuracy and effectiveness of the proposed short-time sparse singular value decomposition could be achieved in comparison with other strategies like short-time multiple signal classification. Besides, the real data cases have verified the effectiveness of the proposed method, which shows great potential applications in wayside condition monitoring and fault diagnosis system for moving vehicles, trains, planes, etc.

A Singular Value Decomposition-Based Guided Wave Array Signal Processing Approach for Weak Signals with Low Signal-to-noise Ratios

Ultrasonic Guided Wave Approach Incorporating SAFE for Detecting Wire Breakage in Bridge Cable

Doppler Distortion Elimination Using Short-Time Sparse Singular Value Decomposition Strategy for Wayside Acoustic Source Fault Diagnosis

Backward Wave Separation Method in a Single Transmitter and Multi-Receiver Sensor Array for Improved Damage Identification of Two-Dimensional Structures

Ultrasonic Guided Wave-Based Damage Identification with Split Spectrum Processing Algorithm

Doppler Distortion Removal in Wayside Circular Microphone Array Signals

A sparse, triangle-shaped sensor array for damage orientation and characterization of composite structures

Signal Domain Transform-based Damage Imaging for the Complicated Structures

Ultrasonic array imaging of highly attenuative materials with spatio-temporal singular value decomposition

Application of Soft-Thresholding on the Decomposed Lamb Wave Signals for Damage Detection of Plate-Like Structures

Structural Health Monitoring of Aerospace Structures using Guided Electromagnetic Waves in a Dielectric Waveguide at Ka-Band

Application of adaptive wavelet transform based multiple analytical mode decomposition for damage progression identification of Cable-Stayed bridge via shake table test

Robust Damage Detection and Localization Under Complex Environmental Conditions Using Singular Value Decomposition-based Feature Extraction and One-dimensional Convolutional Neural Network

Low-Complexity Failed Element Diagnosis for Radar-Communication Mmwave Antenna Array with Low SNR

Structure damage localization with ultrasonic guided waves based on a time-frequency method.

Experimental and Numerical Validation of Guided Wave Phased Arrays Integrated Within Standard Data Acquisition Systems for Structural Health Monitoring

An Enhanced Long-Range Guided-Wave Pipe Inspection Method Based on Local Axial 2-D Signal Acquisition and Processing.

Doppler effect removal based on short-time sparse SVD strategy for wayside acoustic source monitoring

Remote Guided Wave Imaging using Wireless PZT Excitation and Laser Vibrometer Sensing for Local Bridge Monitoring

Guided Wave-Based Damage Detection of Square Steel Tubes Utilizing Structure Symmetry

Investigation of wave propagation path and damage source 3D localization in parallel steel wire bundle