Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Effect of tungsten on the vacancy behaviors in Ta–W alloys from first-principles calculations

Transmutation elements Re/Ta effect on vacancy formation and dissociation behavior in W

Ta concentration effect on nucleation of defects in W-Ta alloy from first-principles model

Properties of Potassium Doped and Tantalum Containing Tungsten after Heavy Ion Irradiation

Molecular dynamics simulation of primary radiation damage in W-Ta alloys: Effect of tantalum

First-principles Study on Mono-Vacancy Self Diffusion and Recovery in Tungsten Crystal

Stability of Concentration-Related Self-Interstitial Atoms in Fusion Material Tungsten

Influence of Titanium on the Clustering of Vacancy, Rhenium and Osmium in Tungsten-Titanium Alloys: First-principles Study

Migration Properties of Mono-Vacancy in W-4d/5d Transition Metal Alloys

Suppressing effect of tantalum on the radiation-induced clustering of rhenium in tungsten

Irradiation effects on binary tungsten alloys at elevated temperatures: Vacancy cluster formation, precipitation of alloying elements and irradiation hardening

The effect of W2+ irradiation and He+ exposure on W-Ta alloy fabricated via SPS

Effect of Titanium on the Precipitation Behaviors of Transmutation Elements in Tungsten-Titanium Alloys from First-Principles Calculations

First-principles Investigation of the Alloying Effect of Ta and W on Γ-Tial

First-principles calculations of transition metal–solute interactions with point defects in tungsten

Effect of Ta on the microstructure and mechanical properties of W Ta alloys prepared by arc melting

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Effects of Tantalum Alloying on Surface Morphology and Deuterium Retention in Tungsten Exposed to Deuterium Plasma

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

Effect of tantalum concentration on the microstructure and mechanical properties of novel W–Ta-Re alloy

Effects of transmutation elements in tungsten