Abstract:Abstract This paper presents an efficient application of Passive Magnetic Ranging (PMR) on the B3 well sidetrack drilled on the High Pressure/High Temperature (HP/HT) Elgin field in the UK Central-North Sea. The planning and execution of this sidetrack presented an escalated set of challenges beyond those encountered in standard well conditions due to the high temperature (HT), the potential for magnetic interference and collision avoidance constraints. The PMR method was deployed in order to mitigate the risk of, and ultimately resolve, magnetic interference. This resulted in minimised collision risk and safe achievement of the sidetrack in a HT environment. Challenges were faced in the 12 1⁄2′′ section which resulted in the open-hole being plugged and abandoned below the 14′′ casing shoe, with the drill-string cemented in place. A complex sidetrack was planned below the 14′′ shoe. Reservoir target and collision avoidance constraints required the planned sidetrack well-path to be close to the abandoned branch, therefore magnetic interference was possible. PMR was planned in the case of interference. The aim was to make the preparation and operational deployment process as efficient as possible, while drilling this sensitive section. A work-flow was developed to manage the performance of ranging passes, specifically interfaces between all parties involved in operations. PMR was deployed to map the relative position of the well during periods of interference and develop ‘synthetic surveys’ to construct the well-path, allowing collision avoidance calculations by defining reliable projection ahead and thus permitting steering of the drilling assembly. The PMR process was successfully deployed on B3 after experiencing high magnetic interference allowing drilling to continue to planned depth with limited impact on operations. This paper provides information on the application of independent PMR and processing aspects to be considered when defining relative wellbore position based on synthetic surveys. Understanding advantages and limitations of PMR opens up opportunities to benefit from this technique in similar challenging drilling applications and help to reduce operational risk and optimise cost. PMR can thus provide a viable alternative to Gyro While Drilling (GWD), where conditions do not allow or where the probability of magnetic interference is marginal and high tool costs could be incurred when potentially not required.

A Fault-Tolerant Integrated Borehole Trajectory Location Method Based on Geomagnetism/IMU of MWD

Direction and Position Measurement in HDD Using Two Magnetic Fields

A Drilling Combination Positioning Method Based on Geomagnetic/Inertial Navigation Combined with PSD Improved Unscented Kalman Filtering Algorithm

A Long-Term Performance Enhancement Method for FOG-Based Measurement While Drilling

Enhanced Azimuth Determination in Drilling via Piecewise Polynomial Fitting and Interpolation

Online Compensation of Geomagnetic Measurement Errors While Drilling

From Design to Experimental Validation of the Fully Mechanical Gravity Tool Face Measurement-While-Drilling System

Simultaneous Localization and Mapping Method for Geomagnetic Aided Navigation

Geographic True Navigation Based on Real-Time Measurements of Geomagnetic Fields.

Guidance Method in Hdd Based on Rotating Magnetic Field

Calibration of accelerometer and magnetometer sensors of MWD systems in directional drilling application

Magnetic-Based Positioning System for Moving Target with Feature Vector

Adaptive Visual Inertial Geomagnetic Tightly Coupled Positioning System

Accurate integrated position measurement system for mobile applications in GPS-denied coal mine

Advanced Well Positioning with Magnetic Interference Based on Passive Magnetic MWD Ranging: Case Study

Attitude and Position Measurement of Bit for Underwater Horizontal Directional Drilling System

Magnetic field interference correction of high-precision geomagnetic directional technology

Study of Drill Measuring System Based on MEMS Accelerative and Magnetoresistive Sensor

Investigating the Survey Instrument for the Underground Pipeline with Inertial Sensor and Dead Reckoning Method.

Study of Magnetic Ranging Technology in Horizontal Directional Drilling

Attitude Measurement and Error Compensation for Horizontal Directional Drilling