Abstract:Differential code bias (DCB) is widely used to achieve consistency between global navigation satellite system (GNSS) observations at different frequencies. Since a strong correlation exists between satellite DCBs at different frequencies and the satellite clock offset, the DCB products need to be aligned with the corresponding clock products. This paper proposes a satellite's DCB conversion model between different clock products released by the International GNSS Service (IGS) via the uncombined method. First, a one-step uncombined approach with a simplified ionospheric processing model is proposed for multi-frequency DCB estimation. In the second step, a linear function model is applied to represent the relationship between the initial satellite clock bias and the DCB estimates at different frequencies. To test the proposed model, BeiDou global system (BDS-3) multi-frequency data collected from 60 multi-GNSS experiment stations and precise clock products released by four IGS analysis centers are used to estimate the DCB. The DCB estimates are compared to the DCB products released by the Chinese Academy of Sciences (CAS) and the Deutsches Zentrum für Luft-und Raumfahrt (DLR). The average root-mean-square (RMS) values of the differences between the DCB estimates and the two DCB products are 0.61 ns and 0.52 ns, which are significantly larger than the corresponding monthly standard deviations. This indicates that systematic bias exists between the DCB estimates and the two DCB products. Additionally, systematic biases are also observed in the DCB estimation when different clock products are used, with the maximum value reaching 4 ns. In order to study the propagation of parameter errors between the DCB estimates and the clock products, regression analysis is conducted to determine the linear model coefficients of the DCB conversion model. The results show that the model coefficients for the four frequency pairs C2I-C6I, C2I-C1X, C2I-C5X and C2I-C7Z are 0.394, 0.237, 0.238, and 0.238, respectively. Kinematic precision point positioning is conducted for model verification. During the first 6-h period, the average three-dimensional RMS of the positioning errors is 13.5 cm when the DCB estimates are corrected by the conversion model, which is improved by 32.5%, 14.6%, and 11.3% compared with the usage of the CAS and DLR products and those without model conversion, respectively.

Modeling and Application of the Time-Varying GPS Differential Code Bias Between C1 and P1 Observations

Estimating the GPS time-varying differential code bias between C1 and P1 observations to provide a model product

Satellite's differential code bias conversion model between different IGS clock products using uncombined BDS-3 multi-frequency data

The Variation of the Estimated GPS Instrumental Bias and Its Possible Connection with Ionospheric Variability

Understanding long-term variations in GPS differential code biases

Timing group delay and differential code bias corrections for BeiDou positioning

An Analysis of Satellite Multichannel Differential Code Bias for BeiDou SPP and PPP

Accuracy Analysis of BeiDou-3/GPS Real-Time Precise Common View Time Transfer Based on Carrier-Phase

Is the Long-Term Variation of the Estimated GPS Differential Code Biases Associated with Ionospheric Variability?

Estimating BDS-3 Satellite Differential Code Biases with the Single-Frequency Uncombined PPP Model

Influences of the Day-Night Differences of Ionospheric Variability on the Estimation of GPS Differential Code Bias

The Effect of DCB Correction on Multi-system Combination Precise Point Positioning

Estimating the Code Bias of BDS to Improve the Performance of Multi-Gnss Precise Point Positioning

Influence of Ionospheric Diurnal Variation on the Estimated GPS Differential Code Bias

GPS satellite differential code bias estimation with current eleven low earth orbit satellites

Determination of Differential Code Bias of GNSS Receiver Onboard Low Earth Orbit Satellite

Correction Model of BDS Satellite-Induced Code Bias and Its Impact on Precise Point Positioning

A unified model of multi-GNSS and multi‐frequency precise point positioning for the joint estimation of ionospheric TEC and time-varying receiver code bias

Estimating and Analyzing Long-Term Multi-GNSS Inter-System Bias Based on Uncombined PPP

Estimation and Analysis of GNSS Differential Code Biases (DCBs) Using a Multi-Spacing Software Receiver

Analysis of factors affecting the estimation of the multi-GNSS satellite differential code biases (SDCBs)