Abstract:In this article, a reconfigurable 1 $\times $ 4 filtering beamforming network (FBFN), which is capable of generating reconfigurable progressive phase difference and amplitude distribution, is presented for the first time. It simply consists of one standard Wilkinson power divider and two identical reconfigurable filtering power dividers (FPDs), where the FPD is constructed by four mutually coupled resonators and three nonresonating nodes. By controlling the nonresonating nodes, the coupling coefficients and the resonant frequencies of resonators, arbitrary progressive phase difference, and reconfigurable amplitude distribution can be easily obtained, demonstrating highly flexible reconfigurability. Meanwhile, since the proposed FBFN does not require any individual phase shifter or crossover, it also exhibits a more compact size compared to the conventional beamforming networks based on the Butler matrix. The detailed theoretical analysis of the FBFN is presented and design equations for determining its circuit parameters are deduced. To experimentally demonstrate the proposed concept, a 1 $\times $ 4 FBFN prototype is fabricated and measured. Experimental results show that, within a center frequency tuning range from 1.01 to 1.1 GHz, the designed FBFN successfully achieves full reconfigurability, including: 1) continuously tunable progressive phase difference in full 360 $^{\circ}$ ; 2) reconfigurable amplitude distribution; and 3) reconfigurable numbers of output ports. Furthermore, a four-element linear antenna array is designed to validate the performance of the FBFN for beam steering. It is shown that, when applied in a phased array, the proposed FBFN is able to perform continuous beam scanning and effective sidelobe level control while maintaining a reasonable filtering performance.

Reconfigurable Fresnel Lens Based on an Active Second-Order Bandpass Frequency-Selective Surface

Wideband Reconfigurable Reflectarray Based on Reflector-Backed Second-Order Bandpass Frequency Selective Surface

Implementation of a 2-D Reconfigurable Fresnel-Zone-Plate Antenna

A Reconfigurable Planar Fresnel Lens for Millimeter-Wave 5G Frontends

Reconfigurable Diffractive Antenna with Three Degrees of Freedom

Dual-Band Fresnel Zone Plate Antenna With Independently Steerable Beams

A Novel Dual-Band Frequency Selective Surface (FSS)

Reconfigurable Antenna Design Based on Fresnel Zone Plate

Novel Multifunctional Reconfigurable Wideband Frequency-Selective Filter/Shielding With Independently Controlled Operating Modes

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

A Novel Miniaturized Strong-Coupled FSS Structure with Excellent Angular Stability

Kirigami-Inspired Linearly Polarized Reconfigurable 3-D Frequency-Selective Surface With Controllable Resonant Behavior

Single- and Dual-Band High-Order Polarization Rotating Frequency Selective Surface

A Novel Tunable Frequency Selective Surface Absorber with Dual-Dof for Broadband Applications.

Dual-band and Dual-Polarized Reflective Fresnel Zone Plate Design Based on Fractal Shape

A Fully Reconfigurable 1 $\times $ 4 Filtering Beamforming Network With Continuous Phase and Amplitude Control

Flexible Design and Realization of Wideband Microwave Absorber with Double-Layered Resistor Loaded FSS

A Novel Miniaturized Dual-band Frequency Selective Surface

Reconfigurable Metasurface for Beamforming in Terahertz Band

Additively Manufactured Millimeter-Wave Dual-Band Single-Polarization Shared Aperture Fresnel Zone Plate Metalens Antenna