Abstract:Surface topography and chemistry have significant influences on the biological performance of biomedical implants. Our aim is to produce an implant surface with favorable biological properties by dual modification of surface chemistry and topography in one single simple process. In this study, because of its chemical stability, excellent corrosion resistance, and biocompatibility, titanium oxide (TiO2) was chosen to coat the biomedical Ti alloy implants. Biocompatible elements (niobium (Nb) and silicon (Si)) were introduced into TiO2 matrix to change the surface chemical composition and tailor the thermophysical properties, which in turn leads to the generation of topographical features under specific thermal history of plasma spraying. Results demonstrated that introduction of Nb2O5 resulted in the formation of Ti0.95Nb0.95O4 solid solution and led to the generation of nanoplate network structures on the composite coating surface. By contrast, the addition of SiO2 resulted in a hairy nanostructure and coexistence of rutile and quartz phases in the coating. Additionally, the introduction of Nb2O5 enhanced the corrosion resistance of TiO2 coating, whereas SiO2 did not exert much effect on the corrosion behaviors. Compared to the TiO2 coating, TiO2 coating doped with Nb2O5 enhanced primary human osteoblast adhesion and promoted cell proliferation, whereas TiO2 coatings with SiO2 were inferior in their bioactivity, compared to TiO2 coatings. Our results suggest that the incorporation of Nb2O5 can enhance the biological performance of TiO2 coatings by changing the surface chemical composition and nanotopgraphy, suggesting its potential use in modification of biomedical TiO2 coatings in orthopedic applications.

Enhanced Oxidation Resistance in Refractory Niobium by Surface Ti+/Si+ Implantation

Surface Characterization and Corrosion Resistance of Ti–Al–Zr Alloy by Niobium Ion Implantation

New Design Concept for Stable Α-Silicon Nitride Based on the Initial Oxidation Evolution at the Atomic and Molecular Levels

Surface Modification of a Ti–Al–Zr Alloy by Niobium Ion Implantation

Study on the Oxidation Behavior of TiB2-CeO2-Modified (Nb,Mo,Cr,W)Si2 Coating on the Surface of Niobium Alloy

High Temperature Oxidation Behavior at 1250°C: A New Multilayer Modified Silicide Coating Design Strategy on Niobium Alloys

Formation and Oxidation Resistance of NbSi<sub>2</sub> Coatings on Niobium by Pack Cementation

Superior Oxidation Resistance of (Al0.34cr0.22nb0.11si0.11ti0.22)(50)n-50 High-Entropy Nitride

Direct visualization and control of SrOx segregation on semiconducting Nb doped SrTiO3 (100) surface

High-Temperature Oxidation Behavior of Plasma Surface Nb-Cr-(Si) Alloying System on γ-TiAl

Nano-Ti5Si3 Leading to Enhancement of Oxidation Resistance

Effects of Al/Si on the oxidation behavior of a TiZrV0.5Nb0.5 refractory high entropy alloy at 1000 °C

Surface Characteristics and Oxidation Behavior of Nitrogen Ion-Implanted Zr–Sn–Nb Alloy

Microstructure and Cyclic Oxidation Behavior of Silicide Coatings Prepared by Molten Salt on Nb–Based Alloys

Effect of Ni in SiO 2 coating on the oxidation resistance of TiAl alloy at 900 °C

Surface characteristics and corrosion behavior of Ti–Al–Zr alloy implanted with Al and Nb

Improving oxidation resistance of TaMoZrTiAl refractory high entropy alloys via Nb and Si alloying

Mechanism of Interstitial Atoms on Oxidation and Fracture of Niobium-Silicon Alloys

The oxidation behavior and interfacial reaction between SiO 2 coating and Ti45Al8.5Nb alloy

Delicate Refinement of Surface Nanotopography by Adjusting TiO2 Coating Chemical Composition for Enhanced Interfacial Biocompatibility.

Improvement of Tribological Behavior of a Ti–Al–Zr Alloy by Nitrogen Ion Implantation