Abstract:This article introduces a hybrid 3-D frequency selective structure (FSS) that offers high stopband suppression and low insertion loss to mitigate pattern degradation resulting from the mutual coupling of co-aperture array antennas. Traditional 2-D FSSs exhibit good passband performance but lack cross-coupling between resonators, making it difficult to achieve strong stopband suppression at a lower frequency. In contrast, traditional 3-D FSSs provide strong stopband suppression, but the vertical structures pose challenges for impedance matching, leading to high passband loss and poor angular stability. The FSS proposed in this article combines the advantages of both 2-D and 3-D FSSs. It introduces transmission zeros by combining a vertical surface with a cross-shaped metal strip on the foundational 2-D passband FSS. This design significantly enhances the stopband suppression capability of the FSS at the frequencies of interest without compromising the low insertion loss performance in the passband. Simulation results indicate that the proposed 3-D FSS achieves a -10 dB stopband within the frequency range of 1.2 to 2.93 GHz, with a stopband suppression of -16 dB at 2.7 GHz. Furthermore, the average insertion loss within the passband frequency range of 3.3-3.8 GHz remains low, staying below 0.23 dB. The FSS's transmission response remains stable under oblique incidences ranging from 0 degrees to 60 degrees. The operating principle of the FSS is elucidated using an equivalent circuit model. A prototype FSS is fabricated and experimentally characterized for validation. The measured results align with the simulated ones, confirming the FSS's high stopband suppression, low insertion loss, and excellent angular stability, making it a viable solution for mitigating pattern degradation in co-aperture array antennas.

A High-Q and Low-Cost Terahertz Frequency Selective Structure

Low-Cost Terahertz Three-Dimensional Frequency Selective Structure: Efficient Analysis and Characterization

A Low-Cost Terahertz Frequency Selective Structure

A Novel Low-Cost Frequency Selective Structure for Millimetre-Wave and Terahertz Applications

A Novel Dual-Band Frequency Selective Surface (FSS)

Terahertz Frequency Selective Surface Based on Metal-Graphene Structure with Independent Frequency Tuneability

An Overview of Three-Dimensional Frequency-Selective Structures

Frequency Selective Surface Designed Using Electric Resonant Structures in Terahertz Frequency Bands

Terahertz Filter Based on Frequency Selective Surfaces

A Highly Frequency-Selective 3D-Printed Dielectric Structure for the Terahertz Range

Implementation Of Three-Dimensional Bandpass Frequency Selective Structure Using Multilayer Pcb Technology

A Three-Dimensional Frequency Selective Structure Based on the Modes Coupling of Spoof Surface Plasmon and Waveguide Transmission

An Ultraminiaturized Dual-Stopband Frequency Selective Surface for Ultra High Frequency.

A Novel 3-D Frequency Selective Surface With Ultrawide Passband and High Selectivity

Three-dimensional Frequency Selective Surfaces

Multiband High-Order Bandstop 3-D Frequency-Selective Structures

Three-dimensional Band-Stop Frequency Selective Structures

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Three-Dimensional Frequency Selective Structure with Wide Passband and Sharp Roll-Off

Three-Dimensional Dual-Polarized Frequency Selective Structure with Wide Out-of-Band Rejection

A Hybrid 3-D Frequency Selective Structure Featuring Enhanced Stopband Suppression and Reduced Insertion Loss