Abstract:Graphite has been extensively employed as commercial anode material in Li-ion batteries due to its high abundance, low cost, and negative electrode potential. Furthermore, it has demonstrated significant potential for use in K-ion batteries. However, distinct structural damage caused by the larger radius of K-ion (0.138 nm) compared to that of Li-ion (0.076 nm) leads to obvious capacity decay and unstable cycle life. It is crucial to improve the cycling stability of graphite in potassium ion batteries (PIBs). Herein, we design a stable interface of graphite anode by graphene coating with a simple and efficient microwave method. According to X-ray photoelectron spectroscopy (XPS), microwave reduction can effectively remove the oxygen group of graphene oxide (GO) within 10 s. The graphene coating can buffer the volume expansion of the graphite to suppress structural collapse; it can also accelerate electronic transmission to improve rate performance. As a result, the graphene-coating graphite anode, named GCG, exhibits super cycling stability with a capacity of 262 mAh center dot g(-1) after 3000 cycles at a current density of 0.2 A center dot g(-1), which means it can operate smoothly for one year. In contrast, at the same current density, graphite exhibits capacity fading to less than 150 mAh center dot g(-1) after 150 cycles. Moreover, compared to graphite, GCG demonstrates better rate performance achieving a capacity of 161.2 mAh center dot g(-1) at 500 mA center dot g(-1). Further electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) tests show that GCG exhibits faster electrical conductivity and ion diffusion compared to graphite. Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) images after cycling verify that the graphene buffer interface benefits the integrity of the electrode structure and improves the stability of the solid electrolyte interphase (SEI). Compared to graphite, the GCG anode exhibits better performance, as follows: 1) The graphene coating inhibits exfoliation of graphite during cycling, solving the problem of graphite anode' short cycling life, and 2) the graphene protective layer improves the ion diffusion rate, resulting in better rate performance of the GCG. In addition, this approach offers the advantages of simple operation and low cost, hopefully enabling large-scale applications of potassium-ion batteries.

Localized High‐Concentration Electrolytes Boost Potassium Storage in High‐Loading Graphite

Sandwich‐Like FeCl3@C As High‐Performance Anode Materials for Potassium‐Ion Batteries

Weakly Solvating Ether-Based Electrolyte Constructing Anion-Derived Solid Electrolyte Interface in Graphite Anode toward High-Stable Potassium-Ion Batteries

Regulating Solid Electrolyte Interphases on Phosphorus/carbon Anodes Via Localized High-Concentration Electrolytes for Potassium-Ion Batteries

Strategies for Harnessing High Rate and Cycle Performance from Graphite Electrodes in Potassium-Ion Batteries

Manipulating the Solvation Structure of Nonflammable Electrolyte and Interface to Enable Unprecedented Stability of Graphite Anodes beyond 2 Years for Safe Potassium‐Ion Batteries

Potassium-enriched graphite for use as stable hybrid anodes in high-efficiency potassium batteries

Advanced flame-retardant electrolyte for highly stabilized K-ion storage in graphite anode

Tunning solvation structure in non-flammable, localized high-concentration electrolytes with enhanced stability towards all aluminum substrate-based K batteries

Latent solvent‐induced inorganic‐rich interfacial chemistry to achieve stable potassium‐ion batteries in low‐concentration electrolyte

Salt-concentrated electrolytes for graphite anode in potassium ion battery

Artificial SEI for Superhigh‐Performance K‐Graphite Anode

Highly‐solvating Electrolyte Enables Mechanically Stable and Inorganic‐rich Cathode Electrolyte Interphase for High‐performing Potassium‐ion Batteries

Engineering Electrode/Electrolyte Interphase Chemistry toward High-Rate and Long-Life Potassium Ion Full-Cell

Commercial Expanded Graphite As a Low–cost, Long-Cycling Life Anode for Potassium–ion Batteries with Conventional Carbonate Electrolyte

Stable Graphite Interface for Potassium Ion Battery Achieving Ultralong Cycling Performance

Mildly-expanded graphite with adjustable interlayer distance as high-performance anode for potassium-ion batteries

Robust Solid Electrolyte Interphases in Localized High Concentration Electrolytes Boosting Black Phosphorus Anode for Potassium-Ion Batteries

Constructing High K + Concentration Layer to Expedite K + Intercalation in Graphite: towards Superior Rate Capability without Trading off Power Density of Potassium-ion Batteries

Graphite as a potassium ion battery anode in carbonate-based electrolyte and ether-based electrolyte

Electrolyte Design Enables Stable and Energy‐dense Potassium‐ion Batteries