Abstract:Global navigation satellite systems (GNSS) can attain centimeter level positioning accuracy, which is conventionally provided by real-time precise point positioning (PPP) and real-time kinematic (RTK) techniques. Corrections from the data center or the reference stations are required in these techniques to reduce various GNSS errors. The time-relative positioning approach differs from the traditional PPP and RTK in the sense that it does not require external real-time corrections. It computes the differences in positions of a single receiver at different epochs using phase observations. As the code observations are not used in this approach, its performance is not affected by the noise and multipath of code observations. High reliability is another advantage of time-relative precise positioning because the ambiguity resolution is not needed in this approach. Since the data link is not required in the method, this approach has been widely used in remote areas where wireless data link is not available. The main limitation of time-relative positioning is that its accuracy degrades over time between epochs because of the temporal variation of various errors. The application of the approach is usually limited to be within a time interval of less than 20 min. The purpose of this study was to increase the time interval of time-relative positioning and to extend the use of this method to applications with a longer time requirement, especially in remote areas without wireless communication. In this paper, the main error sources of the time-relative method are first analyzed in detail, and then the approach to improve the accumulated time relative positioning method is proposed. The performance of the proposed method is assessed using both static and dynamic observations with a duration as long as several hours. The experiments presented in this paper show that, among the four scenarios tested (i.e., GPS, GPS/Galileo, GPS/Galileo/BeiDou, and GPS/Galileo/BeiDou/GLONASS), GPS/Galileo/BeiDou performed best and GPS/Galileo/BeiDou/GLONASS performed worst. The maximum positioning errors were mostly within 0.5 m in the horizontal direction, even after three hours with GPS/Galileo/BeiDou. It is expected that the method could be used for positioning and navigation for as long as several hours with decimeter level horizontal accuracy in remote areas without wireless communication.

Quantitative Research on GPS Positioning in an East-North-Up Coordinate System

Study on Improving GPS Measurement Accuracy

Research for GPS Single Point Positioning in Different Coordinate System

Error Correction Models And Their Effects On Gps Precise Point Positioning

On Two Calculations Needed by Ionospheirc Grid Rectification for Difference Satellite for GPS

GNSS Emergency Positioning Method and Research on the Accuracy Estimation

Application of GPS to Space Vehicles: Analysis of Space Environment and Errors

Real-Time Estimation of GPS Satellite Clock Errors and Its Precise Point Positioning Performance

Accuracy Research on GPS Point Positioning Using IGS Data Products

Research On Stochastic Model For Gps Precise Positioning

Some Key Issues on Pseudorange-Based Point Positioning with GPS, BDS-3, and Galileo Observations

The Analysis of Character of User Range Accuracy

Ionospheric Correction Method for Precise Positioning with GPS Active Network

Analysis of Post-Processed Pseudorange-Based Point Positioning with Different Data Sources for the Current Galileo Constellations

Precise Absolute Positioning for a Single-Frequency User

Improving the Performance of Time-Relative GNSS Precise Positioning in Remote Areas

Research and testing of GPS Real-time precise point positioning

Generalized-positioning for mixed-frequency of mixed-GNSS and its preliminary applications

Research on GPS Satellite Pseudo Broadcast Ephemeris Technology

Towards Millimeter-Level Accuracy in GNSS-Based Space Geodesy: A Review of Error Budget for GNSS Precise Point Positioning

Study on Effects of Error Models on Precise Point Positioning Accuracy