Reaction Mechanisms of Iron(iii) Catalyzed Carbonyl–olefin Metatheses in 2,5- and 3,5-Hexadienals: Significant Substituent and Aromaticity Effects

Dandan Chen,Danling Zhuang,Yu Zhao,Qiong Xie,Jun Zhu

DOI: https://doi.org/10.1039/c9qo01008d

IF: 5.456

2019-01-01

Organic Chemistry Frontiers

Abstract:Theoretical calculations reveal significant substituent and aromaticity effects on Fe(iii)-catalyzed carbonyl–olefin metatheses of hexadienals.

What problem does this paper attempt to address?

Iron Olefin Metathesis: Unlocking Reactivity and Mechanistic Insights

Zachary S Lincoln,Vlad M Iluc

DOI: https://doi.org/10.1021/jacs.4c04356

IF: 15

2024-06-19

Journal of the American Chemical Society

Abstract:Olefin metathesis catalyzed by iron complexes has garnered substantial interest due to iron's abundance and nontoxicity relative to ruthenium, yet its full potential remains untapped, largely because of the propensity of iron carbenes to undergo cyclopropanation instead of cycloreversion from a metallacycle intermediate. In this report, we elucidate the reactions of [{PC(sp2)P}Fe(L)(N(2))], ([PC(sp2)P] = bis[2-(diisopropylphosphino)phenyl]methylene) with strained olefins, unveiling their...

chemistry, multidisciplinary
A DFT study of olefin metathesis over heterogeneous Mo/HBeta catalyst: The influence of Mo oxidation state

Xin Li,Jing Guan,Danhong Zhou,Guohui Li,Xiuwen Han,Weiping Zhang,Xinhe Bao

DOI: https://doi.org/10.1016/j.theochem.2009.07.035

2009-01-01

Abstract:Density functional theory (DFT) calculations were performed to investigate the influence of Mo oxidation state on the olefin metathesis over heterogeneous Mo/HBeta catalyst. Three cluster models of Mo-methylidene active sites with different Mo oxidation states were developed. The olefin such as ethene metathesis on Mo-methylidene occurs via two elementary steps, i.e. the formation of the molybdacyclobutane intermediate and the opening of the four-membered ring. On the basis of the energy profiles, the energy barriers of the second step are largely dependent on the Mo oxidation states, and the reaction rate of Mo-methylidene active sites are found to decrease in the order of MoV>MoVI>MoIV.
DFT Studies on the Reaction Mechanism of Cross-Metathesis of Ethylene and 2-Butylene to Propylene over Heterogeneous Mo/HBeta Catalyst

Xin Li,Jing Guan,Anmin Zheng,Danhong Zhou,Xiuwen Han,Weiping Zhang,Xinhe Bao

DOI: https://doi.org/10.1016/j.molcata.2010.07.007

2010-01-01

Abstract:Density functional theory (DFT) calculations were performed to study the detailed reaction mechanism of the cross-metathesis of ethylene and 2-butylene over heterogeneous Mo/HBeta catalysts. The whole process is divided into two stages: the initiation of Mo–carbene species from Mo-oxo precursors and the propagating process by these active sites to yield propylene. The formation of initial Mo–carbene takes place via the endothermic addition and the subsequent decomposition of the oxametallacyclobutane intermediate. In the propagating stage to yield the final products, MoCHCH3 firstly reacts with ethylene to form MoCH2, which would further react with 2-butylene to give another propylene molecule. The oxidation states of the Mo species have great influences on the reactivities associated with these two stages. It is unfavorable for MoIV-oxo precursors to produce Mo–alkylidene species compared with MoVI and MoV sites. The energy barriers indicate that the MoVI and MoV–alkylidene species could catalyze the olefin metathesis reaction, but MoV ones are more preferred to be the active sites. The calculation results are consistent with our previous XPS results.
A Theoretical Study of the Substituent Effect on Reactions of Amines, Carbon Dioxide and Ethylene Oxide Catalyzed by Binary Ionic Liquids

Minmin Huang,Zhoujie Luo,Tong Zhu,Jian Chen,John Zenghui Zhang,Fei Xia

DOI: https://doi.org/10.1039/c7ra09485j

IF: 4.036

2017-01-01

RSC Advances

Abstract:DFT calculations indicate that the key activation barriers in the reaction of ethylene oxide and amines play an important role in determining the yields of products.
Iron-catalyzed Olefin Synthesis by Direct Coupling of Alkenes with Alcohols: A DFT Investigation

Wei Feng,Yanwei Sun,Huiling Liu,Kejin Xu,Xuri Huang

DOI: https://doi.org/10.1016/j.comptc.2018.09.011

IF: 2.292

2018-01-01

Computational and Theoretical Chemistry

Abstract:The mechanism of the iron-catalyzed olefin synthesis reaction was investigated using the density functional theory (DFT) calculations. The catalytic performances of the FeCl3 and FeCl2 in different spin states for the olefin synthesis reaction were studied in detail. Both of the two reactions are found to proceed predominantly on high spin state potential energy surfaces, sextet and quintet respectively. The whole catalytic cycle can be divided into three stages: the dehydration step, the electrophilic addition step, and the deprotonation step. The electrophilic addition transition state has the highest energy in the whole catalytic cycle, which is consistent with the experimental prediction. According to the results, (E)-alkene is the main product in both the FeCl3 and the FeCl2 catalyzed olefin synthesis reaction. The geometry, mechanism, and the overall reaction barriers of the olefin synthesis reaction are very similar when FeCl2 and FeCl3 are used as catalysts. The reaction barrier of FeCl2 catalyst is lower than that of FeCl3, showing that FeCl2 may be more effective in this kind of olefin synthesis reaction.
Mechanisms and Origins of Chemo- and Regioselectivities of Ru(II)-Catalyzed Decarboxylative C-H Alkenylation of Aryl Carboxylic Acids with Alkynes: A Computational Study.

Jing-Lu Yu,Shuo-Qing Zhang,Xin Hong

DOI: https://doi.org/10.1021/jacs.7b00714

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:The mechanisms and chemo- and regioselectivities of Ru(II)-catalyzed decarboxylative C-H alkenylation of aryl carboxylic acids with alkynes were investigated with density functional theory (DFT) calculations. The catalytic cycle involves sequential carboxylate-directed C-H activation, alkyne insertion, decarboxylation and protonation. The facile tether-assisted decarboxylation step directs the intermediate toward the desired decarboxylative alkenylation, instead of typical annulation and double alkenylation pathways. The decarboxylation barrier is very sensitive to the tether length, and only the seven-membered ring intermediate can selectively undergo the designed decarboxylation, suggesting a tether-dependent chemoselectivity. This tether-dependent chemoselectivity also applies to the alkyl tethers. In addition, the polarity of solvent is found to control the chemoselectivity between the decarboxylative alkenylation and [4 + 2] annulation. Solvent with low polarity (toluene) favors the decarboxylation pathway, leading to the decarboxylative alkenylation. Solvent with high polarity (methanol) favors the ionic stepwise C-O reductive elimination pathway, leading to the [4 + 2] annulation. To understand the origins of regioselectivity with asymmetric alkynes, the distortion/interaction analysis was applied to the alkyne insertion transition states, and led to a predictive frontier molecular orbital model. The asymmetric alkynes selectively use the terminal with the larger HOMO orbital coefficient to form the C-C bond in the insertion step.
Distortion-accelerated Cycloadditions and Strain-Release-promoted Cycloreversions in the Organocatalytic Carbonyl-Olefin Metathesis

Xin Hong,Yong Liang,Allison K. Griffith,Tristan H. Lambert,K. N. Houk

DOI: https://doi.org/10.1039/c3sc52882k

IF: 8.4

2014-01-01

Chemical Science

Abstract:The mechanism of hydrazine-catalyzed carbonyl-olefin metathesis relying on a novel (3 + 2) strategy is studied by density functional theory (DFT) calculations. The origins of the special reactivity of cyclopropene in this transformation are revealed, and the reactivities of different alkenes in the (3 + 2) cycloadditions and cycloreversions are compared. It is found that the ease of distortion of reactants accelerates cycloadditions, and that the strain release is the controlling factor for cycloreversions.
A theoretical study of the reaction of Fe+ with CH3X (X=Cl, Br, I)

Xiaoli Sun,Jilai Li,Xuri Huáng,Chiachung Sun

DOI: https://doi.org/10.6023/A13020177

2013-01-01

Acta Chimica Sinica

Abstract:The C-X bond functionalization catalyzed by iron and their complexes has attracted much attention. Using density functional theory (DFT), we herein studied the reactivity and mechanism of iron cation (Fe+) towards C-X bond cleavage of CH3X (X=Cl, Br, I) at B3LYP/def2-SVP level of theory. The results show that there are two possible pathways available for the title reactions, i.e. the insertion mechanism and the SN2 mechanism, respectively. Mechanistically, in the insertion mechanism, the reactions stem from Fe+ attacking on the side of CH3X and results in the generation the products FeX+ and CH3 ·; whereas in the SN2 mechanism, the Fe+ initially attacks the substrate from the back of C-X yielding FeCH3 + and X·. The results show that the sextet and the quartet states of Fe+ demonstrate quite distinct reactivity towards the cleavage of C-X bonds in the most potential pathways, and the quartet pathways are dominant in all the pathways. The relative higher barriers in the SN2 pathways results in their lower competitiveness in the title reactions. In addition, our results show that, for all the three reaction systems, the insertion mechanism is exothermic; whereas for the SN2 mechanism, only X=I is exothermic, however. Furthermore, the calculations also show that these reactions demonstrate two-state reactivity (TSR) scenario. There are minimum energy crossing points (MECPs) between the sextet and quartet state on potential energy surfaces (PESs) both at the entrance and export sides for the two reaction mechanisms. On the other hand, the electron transfer evolution analysis indicates that the spin polarization plays important role in the stabilization of the potential energy surfaces and as a result, it controls the pathways by which it takes place and the branch ratio of the major products and byproducts. This thorough theoretical study, especially the detailed electronic structure analysis, may provide important clues for understanding the C-X bond activation and theoretical fundamental evidences for iron-based catalysts design. © 2013 Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences.
Reactivity of an Iron Carbonyl Dianion Dictated by a Lewis Basic Appendant

Xiaohu Zhang,Xueying Guo,Jiaxiang Chu

DOI: https://doi.org/10.1002/ejic.202300616

IF: 2.551

2024-01-04

European Journal of Inorganic Chemistry

Abstract:Studies toward transition metals in negative oxidation states are much less explored compared to those in zero or positive oxidation states. In this study, we present the synthesis and reactivity studies of an Fe(‐II) carbonyl dianion (3) featuring an appended Lewis base, [(L)Fe(CO)3]2‐ (L=Ph2PCH2CH2NMe2). Unlike the well‐known reactivity of [Fe(CO)4]2‐ with common electrophiles (E+) which typically forms [(E)2Fe(CO)4], 3 reacted with 2 equiv. of Ph3SnCl to afford a mixture of two products: one being an Fe(II) bis(triphenylstannyl) product (4), and the other an Fe stannylene product (5). Further insights into the reactivity of 3 was elucidated through its reactions with 2 equiv. of Cy3SnCl or Me3SiCl, producing an Fe(II) bis(tricyclohexylstannyl) product (8) and a zwitterionic complex (11), respectively, the latter emerging via THF ring‐opening. Intermediates generated from reactions of 3 with 1 equiv. of each electrophile were isolated to shed light on the reaction mechanisms, highlighting the influence of appended Lewis base on the reactivity of metal carbonyl dianions, especially the generation of the novel stannylene complex 5. The electronic structure of this paramagnetic stannylene complex was also investigated by computational studies.

chemistry, inorganic & nuclear
Computational Study of Iron-Catalyzed Intramolecular [2+2] Cycloaddition and Cycloisomerization of Enyne Acetates: Mechanism and Selectivity

Haoran Wang,Qingyang Zhou,Ailin Gao,Zhenfeng Shang,Ruifang Li,Xiufang Xu

DOI: https://doi.org/10.1021/acs.joc.2c02335

2023-01-01

Abstract:The mechanism of iron-catalyzed intramolecular [2 + 2] cycloaddition and cycloisomerization of enyne acetates has been investigated with DFT computations. Both mechanisms start the catalytic cycle from the stepwise 1,2-acyloxy migration to afford the iron carbene. The [2 + 2] cycloaddition mechanism involves subsequent key steps of [2 + 2] cycloaddition, 1,2-acyloxy migration, and reductive elimination to generate the azabicyclo [3.2.0] heptane product, with the reductive elimination being the rate-determining step. The cycloisomerization mechanism involves subsequent key steps of [2 + 2] cycloaddition, stepwise 1,4-acyloxy migration to produce the allenylpyrrolidine product, with the 1,4-acyloxy migration being the rate-determining step. Reaction potential energy surfaces for two model substrates that have or do not have alkene-terminal substituents have been investigated and the origins of the selectivities have been disclosed. Moreover, energy profiles with three possible spin states (SFe = 0, 1, 2) have been considered. The reaction is suggested to occur mainly on the singlet potential energy surface with a few spin crossovers between singlet and triplet states involved, which indicates that this reaction should have two-state reactivity (TSR).
Mechanism insights of ethane C-H bond activations by bare [Fe(III)═O]+: explicit electronic structure analysis

Xiao-Li Sun,Xu-Ri Huang,Ji-Lai Li,Rui-Ping Huo,Chia-Chung Sun

DOI: https://doi.org/10.1021/jp2120302

2012-02-09

Abstract:Alkane C-H bond activation by various catalysts and enzymes has attracted considerable attention recently, but many issues are still unanswered. The conversion of ethane to ethanol and ethene by bare [Fe(III)═O](+) has been explored using density functional theory and coupled-cluster method comprehensively. Two possible reaction mechanisms are available for the entire reaction, the direct H-abstraction mechanism and the concerted mechanism. First, in the direct H-abstraction mechanism, a direct H-abstraction is encountered in the initial step, going through a collinear transition state C···H···O-Fe and then leading to the generation of an intermediate Fe-OH bound to the alkyl radical weakly. The final product of the direct H-abstraction mechanism is ethanol, which is produced by the hydroxyl group back transfer to the carbon radical. Second, in the concerted reaction mechanism, the H-abstraction process is characterized via overcoming four/five-centered transition states (6/4)TSH_c5 or (4)TSH_c4. The second step of the concerted mechanism can lead to either product ethanol or ethene. Moreover, the major product ethene can be obtained through two different pathways, the one-step pathway and the stepwise pathway. It is the first report that the former pathway starting from (6/4)IM_c to the product can be better described as a proton-coupled electron transfer (PCET). It plays an important role in the product ethene generation according to the CCSD(T) results. The spin-orbital coupling (SOC) calculations demonstrate that the title reaction should proceed via a two-state reactivity (TSR) pattern and that the spin-forbidden transition could slightly lower the rate-determining energy barrier height. This thorough theoretical study, especially the explicit electronic structure analysis, may provide important clues for understanding and studying the C-H bond activation promoted by iron-based artificial catalysts.
Dft Calculations on the Mechanism of Transition-Metal-Catalyzed Reaction of Diazo Compounds with Phenols: O-H Insertion Versus C-H Insertion

Yuan Liu,Zhoujie Luo,John Zenghui Zhang,Fei Xia

DOI: https://doi.org/10.1021/acs.jpca.6b05735

2016-01-01

The Journal of Physical Chemistry A

Abstract:The reaction of diazo compounds with transition-metal carbenes is an efficient way to achieve the functionalization of chemical bonds in organic molecules, especially for the C-H and O-H bonds. However, the selective mechanisms of C-H and O-H bond insertions by various metal carbenes such as Rh and Cu complexes are not quite clear. In this work, we performed a comprehensively theoretical investigation of the phenol C-H and O-H bonds inserted by Rh and Cu carbenes by using DFT calculations. The calculated results reveal that the nucleophilic additions of phenols to the Rh and Cu carbenes in the C-H bond insertions are the rate-determining steps of whole reactions, which are higher than the barriers in the O-H insertions. In the process of intramolecular [1,3]-H transfer, the Rh and Cu ligands in their carbenes tend to dissociate into solution rather than the intramolecular migration due to their weak metal-carbon bonds. A deeply theoretical analysis of the electronic structures of Rh, Cu, and Au carbenes as well as their complexes elucidated their differences in the chemoselectivity of C-H and O-H insertion products, which agrees with the experimental observations well.
Iron-Catalyzed Meerwein Carbooxygenation of Electron-Rich Olefins: Studies with Styrenes, Vinyl Pyrrolidinone, and Vinyl Oxazolidinone

Edson Leonardo Scarpa de Souza,Carson Wiethan,Carlos Roque Duarte Correia

DOI: https://doi.org/10.1021/acsomega.9b03046

IF: 4.1

2019-10-29

ACS Omega

Abstract:The arylative oxygenation of the electron-rich olefins styrene, α-methylstyrene, vinyl pyrrolidinone, and vinyl oxazolidinone was accomplished using arenediazonium salts and catalytic amounts of FeSO4 in an effective single electron transfer radical process. A broad range of aryldiazonium salts was tolerated using water, methanol, or their combination with acetonitrile to furnish the corresponding carbohydroxylated and carbomethoxylated products (42 examples), including functionalized dihydroisocoumarin and dihydrobenzofuran systems in good to excellent yields (up to 88%). The protocols developed for the Fe(II)-catalyzed carbohydroxylation were also compared to Ru(II) and Ir(III) photoredox carbooxygenations of these electron-rich olefins. The Fe(II)-catalyzed process proved to be highly competitive compared to the photoredox and the uncatalyzed processes. The proposed mechanism for the Fe(II)-catalyzed reactions involves the synergic combination with an effective Fe+2/Fe+3 redox system and a radical polar crossover mechanism featuring an unprecedented capture of the reactive N-acyliminium in the case of vinyl pyrrolidinone and vinyl oxazolidinone.

chemistry, multidisciplinary
Theoretical investigation on the elusive biomimetic iron(III)-iodosylarene chemistry: An unusual hydride transfer triggers the Ritter reaction

Lanping Gao,Xiaolu Chen,Dongru Sun,Hua Zhao,Yufen Zhao,Wonwoo Nam,Yong Wang

DOI: https://doi.org/10.1016/j.cclet.2021.05.030

IF: 9.1

2021-01-01

Chinese Chemical Letters

Abstract:Introduction of iodosylarnes into biomimetic nonheme chemistry has made great achievement on identification of the subtle metal-oxygen reaction intermediates. However, after more than three decades of experimental and theoretical efforts the nature of the metal-iodosylarene adducts and the related dichotomous one-oxidant/multiple-oxident controversy have remained a matter of speculation. Herein, we report a theoretical study of the structure-activity relationship of the noted iron(III)-iodsylarene complex, FeIII (PhIO)(OTf)(3) (1), in oxygenation of cyclohexene. The calculated results revealed that 1 behaves like a chameleon by adapting its roles as a 2e-oxidant or an oxygen donor, as a response to the regioselective attack of the C-H bond and the C=C bond. The oxidative C-H bond activation by 1 was found, for the first time, to proceed via a novel hydride transfer process to form a cyclohexene carbonium intermediate, such non-rebound step triggers the Ritter reaction to uptake an acetonitrile molecule to form the amide product, or proceeds with the rebound of the hydroxyl group return to the solvent cage to form the hydroxylated product. While in the C=C bond activation, 1 is a normal oxygen donor and shows two-state reactivity to present the epoxide product via a direct oxygen atom transfer mechanism. These mechanistic findings fit and explain the famous Valentine's experiments and enrich the non-rebound scenario in bioinorganic chemistry. (C) 2021 Published by Elsevier B.V. on behalf of Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences.
Mechanistic Insight into the Carboxylic Derivatives Formation from Co2 and Ethylene over Iron(0)-Based Catalyst

Xinxin Ding,Yue Mu,Youcai Zhu,Xing Guo,Kaimin Liu,Li Sun,Zhen Liu

DOI: https://doi.org/10.1016/j.mcat.2023.113084

IF: 4.6

2023-01-01

Molecular Catalysis

Abstract:Since the 1980s, nickel/palladium-based catalysts have been extensively studied for the coupling reactions of CO2 and ethylene. In this study, the CO2 and ethylene coupling mediated by the iron(0)-based catalyst with a bis (dicyclohexylphosphino)ethane (dcpe) ligand was systematically investigated by means of DFT calculations. The DFT functionals were first subjected to a benchmark test in order to describe an iron-catalyzed reaction with a two-state reactivity (TSR). For the Fe/dcpe catalytic system, the formation of the five-membered iron-lactone 3 follows a stepwise route, which is easy to occur with a low energy barrier of 13.8 kcal/mol. The competing reactions by CO2 insertion and beta-H elimination determine the fate of the five-membered iron-lactone 3, which may lead to the formation of three different products, including the formation of i) succinic acid, ii) iso-methylmalonic acid, and iii) acrylic acid. The calculated TOFs showed that CO2 insertion into the five-membered iron-lactone 3 is more likely to occur (1.67 h-1 for the formation of succinic acid) compared with the beta-H elimination leading to iso-methylmalonic acid and acrylic acid. Interestingly, beta-H elimination can be effectively facilitated by addition of the electrophiles, and a comparable TOF of 0.042 h-1 was obtained for the formation of methyl acrylate in the presence of CH3I. Unlike nickel-/palladium-catalyzed CO2 and ethylene coupling reactions, all four iron(0)-catalyzed reaction routes investigated herein showed a two-state reactivity scenario involving spin crossover between triplet and quintet PESs. This study provides a mechanistic under-standing of the intriguing iron(0)-catalyzed CO2 and ethylene coupling reactions, which may shed some light on the development of green catalysts for CO2 utilization.
Remote substituent effects on gas-phase homolytic Fe-O and Fe-S bond energies of p-G-C6H4OFe(CO)2(η5- C5H5) and p-G-C6H4SFe(CO) 2(η5-C5H5) studied using Hartree-Fock and density functional theory methods

Qing Zeng,Zucheng Li,Ling Dong,Daxiong Han,Rufeng Wang,Xiangri Li,Genben Bai

DOI: https://doi.org/10.1002/poc.3152

2013-01-01

Journal of Physical Organic Chemistry

Abstract:Metal-ligand bond enthalpy data can afford invaluable insights into important reaction patterns in organometallic chemistry and catalysis. In this paper, the Fe-O and Fe-S homolytic bond dissociation energies [Hhomo(Fe-O)'s and Hhomo(Fe-S)'s] of two series of para-substituted phenoxydicarbonyl(5-cyclopentadienyl) iron [p-G-C6H4OFp (1)] and (para-substituted benzenethiolato)dicarbonyl(5-cyclopentadienyl) iron [p-G-C6H4SFp (2)] were studied using Hartree-Fock and density functional theory (DFT) methods with large basis sets. In this study, Fp is (5-C5H5)Fe(CO)2, and G are NO2, CN, COMe, CO2Me, CF3, Br, Cl, F, H, Me, MeO, and NMe2. The results show that DFT methods can provide the best price/performance ratio and accurate predictions of Hhomo(Fe-O)'s and Hhomo(Fe-S)'s. The remote substituent effects on Hhomo(Fe-O)'s and Hhomo(Fe-S)'s [Hhomo(Fe-O)'s and Hhomo(Fe-S)'s] can also be satisfactorily predicted. The good correlations [r=0.98 (g, 1), 0.98 (g, 2)] of Hhomo(Fe-O)'s and Hhomo(Fe-S)'s in series 1 and 2 with the substituent sigma p+ constants imply that the para-substituent effects on Hhomo(Fe-O)'s and Hhomo(Fe-S)'s originate mainly from polar effects, but those on radical stability originate from both spin delocalization and polar effects. Hhomo(Fe-O)'s (1) and Hhomo(Fe-S)'s (2) conform to the captodative principle. Insight from this work may help the design of more effective catalytic processes. Copyright (c) 2013 John Wiley & Sons, Ltd.
Theoretical investigation on the mechanism of FeCl3-catalysed cross-coupling reaction of alcohols with alkenes

yanwei sun,haiyang jiang,hao tang,haixia xu,huiling liu,kai sun,xuri huang

DOI: https://doi.org/10.1080/00268976.2014.886738

2014-01-01

Molecular Physics

Abstract:The mechanism of the FeCl3-catalysed cross-coupling reaction of alcohols with alkenes has been investigated using the density functional theory. All calculations were performed in liquid phase. The structures of intermediates and transition states are computed and analysed in detail. The calculations show that the entire catalytic cycle consists in three steps: (1) H-abstraction, (2) free-radical addition, and (3) hydrogen transfer. The rate-limiting step in the whole catalytic cycle is the hydrogen-abstraction step. Only the quartet potential surface is likely to play an essential role in this cross-coupling reaction. The alpha-C(sp(3))-H bond of the phenylpropanol is cleaved in a homolytic fashion. Moreover, we justify the change of the oxidation state of iron along the overall reaction pathway on the basis of the computed natural population atomic charges and spin densities. Our calculated results are consistent with and provide a reliable interpretation for the experimental observations that suggest the cross-coupling reaction occurs through a radical mechanism.
Mechanistic Insights into Manganese(I)-Catalyzed Chemoselective Hydroarylations of Alkynes: A Theoretical Study

Zheyuan Wang,Lei Zhu,Kangbao Zhong,Ling-Bo Qu,Ruopeng Bai,Yu Lan

DOI: https://doi.org/10.1002/cctc.201801301

IF: 4.5

2018-01-01

ChemCatChem

Abstract:Density functional theory calculations were employed to elucidate the mechanism of Mn-catalyzed chemoselective hydroarylation reactions. The Mn-catalyzed [4+2] annulation undergoes a reaction pathway involving sequential imine-directed C-H bond cleavage, alkyne insertion into the Mn-C bond, beta-oxygen elimination and outer catalytic cycle annulation-aromatization. Computational results demonstrated that the previously proposed chelation-assisted alkyne insertion process was unfavorable owing to the weak coordination ability of the beta-oxygen leaving group compared with that of CO. Further noncovalent interactions analysis indicated that the origin of the high regioselectivity was contributed to the steric repulsion resulting from significant nonbonding overlap between the reacting aryl moiety and the quaternary carbon group of the reactant in the alkyne insertion step. In addition, in the Bronsted-acid-mediated chemoselective alkenylation reaction, the used terminal alkynes had relatively enhanced reactivity in the alkyne insertion step owing to its reduced steric repulsion. From the active alkenyl-Mn intermediate, the activation free energy of protonation and beta-oxygen elimination are approximate, thus the alkenylated product is obtained after protonation in an acidic system. We expect that this detailed mechanistic study will significantly enhance our ability to develop Mn-catalyzed arene C-H bond functionalization reactions.
Unusual KIE and dynamics effects in the Fe-catalyzed hetero-Diels-Alder reaction of unactivated aldehydes and dienes

Yuhong Yang,Xiaoyong Zhang,Li-Ping Zhong,Jialing Lan,Xin Li,Chuang-Chuang Li,Lung Wa Chung

DOI: https://doi.org/10.1038/s41467-020-15599-w

IF: 16.6

2020-01-01

Nature Communications

Abstract:Hetero-Diels-Alder (HDA) reaction is an important synthetic method for many natural products. An iron(III) catalyst was developed to catalyze the challenging HDA reaction of unactivated aldehydes and dienes with high selectivity. Here we report extensive density-functional theory (DFT) calculations and molecular dynamics simulations that show effects of iron (including its coordinate mode and/or spin state) on the dynamics of this reaction: considerably enhancing dynamically stepwise process, broadening entrance channel and narrowing exit channel from concerted asynchronous transition states. Also, our combined computational and experimental secondary KIE studies reveal unexpectedly large KIE values for the five-coordinate pathway even with considerable C-C bond forming, due to equilibrium isotope effect from the change in the metal coordination. Moreover, steric and electronic effects are computationally shown to dictate the C=O chemoselectivity for an alpha,beta-unsaturated aldehyde, which is verified experimentally. Our mechanistic study may help design homogeneous, heterogeneous and biological catalysts for this challenging reaction.
Is Mn(I) more promising than Fe(II) – A comparison of Mn vs. Fe complexes for olefin metathesis

Maren Podewitz,Jan Pecak,Radu A. Talmazan,Karl Kirchner,Dennis Svatunek

DOI: https://doi.org/10.26434/chemrxiv-2023-z3zg0-v2

2024-01-12

Abstract:Olefin metathesis is one of the most significant transformations in organic chemistry and an excellent example for efficient homogeneous catalysis. Although most currently used catalysts are primarily based on 4d and 5d metals, cycloaddition and cycloreversion reactions can also be attributed to first-row transition metals, such as Fe. Surprisingly, the potential of Mn(I) based catalysts for olefin metathesis has been unexplored, despite its prominence in homogeneous catalysis and its diagonal relationship to Ru(II). In the present study, we have investigated the prospective capabilities of Mn complexes for cycloaddition and reversion reactions, using density functional theory. Therefore, we have initially compared literature known iron model systems and their isoelectronic Mn counterparts regarding reactivity and electronic structure. Next, we constructed potential Mn complexes derived from synthetically accessible species including carbonyl ligands and obeying octahedral geometry. Based on thermodynamic parameters and the calculation of electronic descriptors, we were able to validate the isodiagonal relationship. Our study serves as guidance for the experimental chemist.

Chemistry

Reaction Mechanisms of Iron(iii) Catalyzed Carbonyl–olefin Metatheses in 2,5- and 3,5-Hexadienals: Significant Substituent and Aromaticity Effects

Iron Olefin Metathesis: Unlocking Reactivity and Mechanistic Insights

A DFT study of olefin metathesis over heterogeneous Mo/HBeta catalyst: The influence of Mo oxidation state

DFT Studies on the Reaction Mechanism of Cross-Metathesis of Ethylene and 2-Butylene to Propylene over Heterogeneous Mo/HBeta Catalyst

A Theoretical Study of the Substituent Effect on Reactions of Amines, Carbon Dioxide and Ethylene Oxide Catalyzed by Binary Ionic Liquids

Iron-catalyzed Olefin Synthesis by Direct Coupling of Alkenes with Alcohols: A DFT Investigation

Mechanisms and Origins of Chemo- and Regioselectivities of Ru(II)-Catalyzed Decarboxylative C-H Alkenylation of Aryl Carboxylic Acids with Alkynes: A Computational Study.

Distortion-accelerated Cycloadditions and Strain-Release-promoted Cycloreversions in the Organocatalytic Carbonyl-Olefin Metathesis

A theoretical study of the reaction of Fe+ with CH3X (X=Cl, Br, I)

Reactivity of an Iron Carbonyl Dianion Dictated by a Lewis Basic Appendant

Computational Study of Iron-Catalyzed Intramolecular [2+2] Cycloaddition and Cycloisomerization of Enyne Acetates: Mechanism and Selectivity

Mechanism insights of ethane C-H bond activations by bare [Fe(III)═O]+: explicit electronic structure analysis

Dft Calculations on the Mechanism of Transition-Metal-Catalyzed Reaction of Diazo Compounds with Phenols: O-H Insertion Versus C-H Insertion

Iron-Catalyzed Meerwein Carbooxygenation of Electron-Rich Olefins: Studies with Styrenes, Vinyl Pyrrolidinone, and Vinyl Oxazolidinone

Theoretical investigation on the elusive biomimetic iron(III)-iodosylarene chemistry: An unusual hydride transfer triggers the Ritter reaction

Mechanistic Insight into the Carboxylic Derivatives Formation from Co2 and Ethylene over Iron(0)-Based Catalyst

Remote substituent effects on gas-phase homolytic Fe-O and Fe-S bond energies of p-G-C6H4OFe(CO)2(η5- C5H5) and p-G-C6H4SFe(CO) 2(η5-C5H5) studied using Hartree-Fock and density functional theory methods

Theoretical investigation on the mechanism of FeCl3-catalysed cross-coupling reaction of alcohols with alkenes

Mechanistic Insights into Manganese(I)-Catalyzed Chemoselective Hydroarylations of Alkynes: A Theoretical Study

Unusual KIE and dynamics effects in the Fe-catalyzed hetero-Diels-Alder reaction of unactivated aldehydes and dienes

Is Mn(I) more promising than Fe(II) – A comparison of Mn vs. Fe complexes for olefin metathesis