Abstract:Direct evaporative cooling systems usually involve the process of spraying water, which may form the drift of water droplets. In addition, the use of circulating water can also lead to the growth of bacteria and molding on the surface of the packing material, affecting the indoor air quality. To address these issues, this paper intends to propose an evaporative cooling method incorporated with hollow fiber membranes. The selective permeation membrane technology allows the membrane module to isolate air from water, which selectively allows only water vapor to pass through, preventing the droplets from entraining bacteria into the air. A mathematical model has been developed to theoretically investigate the heat and moisture transfer between water and air in a hollow fiber membrane-based evaporative cooling module. The governing equations for the pre-cooling IEHX were established and then solved by employing the COMSOL Multiphysics platform. This study validated the model by comparing its outlet air dry bulb temperature and relative humidity against experimental data acquired from literature sources. The numerical model showed good agreement with the experimental findings with maximum discrepancy of 7.0%. The validated model was employed to investigate the influences of the inlet air velocity, inlet air dry-bulb temperature, inlet air relative humidity and geometric parameters on the cooling effect of the evaporative cooling module. Simulation results indicated that the outlet air temperature is greatly affected by the relative humidity of the inlet air under constant inlet air temperature conditions. A higher inlet air relative humidity will result in a higher outlet air dry bulb temperature. In addition, the cooling effectiveness was reduced for a higher inlet air velocity. The design of the hollow fiber membrane-based evaporative cooling module was optimized based on the simulation study.

Energy Flow-Based Method for Analysis and Optimization of Evaporative Cooling and Ventilation Systems

Optimization Criteria for the Performance of Heat and Mass Transfer in Indirect Evaporative Cooling Systems

A Simplified Analytical Model for Indirect Evaporative Cooling Considering Condensation from Fresh Air: Development and Application

A Global Optimization Method for Evaporative Cooling Systems Based on the Entransy Theory

Power Flow Method-Based Integrated Modeling and Optimization for Building Heat Transport and Gas Refrigeration System

Theoretical Analysis Of Indirect Evaporative Cooler With Separate Type Heat Pipe Applied On Ventilation

A new approach to analysis and optimization of evaporative cooling system I: Theory

Performance Prediction and Optimization of Cross-Flow Indirect Evaporative Cooler by Regression Model Based on Response Surface Methodology

Performance Evaluation of a Direct Evaporative Cooling System with Hollow Fiber-Based Heat Exchanger

Optimization of the Counter-Flow Heat and Mass Exchanger for M-Cycle Indirect Evaporative Cooling Assisted with Entropy Analysis

Numerical Study and Optimization of a Combined Thermoelectric Assisted Indirect Evaporative Cooling System

THE ENERGY AND EXERGY ANALYSIS OF COUNTER-FLOW REGENERATIVE EVAPORATIVE COOLER

Thermal Performance of an Active Thermoelectric Ventilation System Applied for Built Space Cooling: Network Model and Finite Time Thermodynamic Optimization

Energy and Exergy Study on Indirect Evaporative Cooler Used in Exhaust Air Heat Recovery

Indirect Evaporative Cooler Considering Condensation from Primary Air : Model Development and Parameter Analysis

Numerical Study on Performance of a Hybrid Indirect Evaporative Cooling Heat Recovery Heat Pump Ventilator As Applied in Different Climatic Regions of China

A new approach to analysis and optimization of evaporative cooling system II: Applications

THE ENERGY AND EXERGY ANALYSIS ON THE PERFORMANCE OF COUNTER-FLOW HEAT AND MASS EXCHANGER FOR M-CYCLE INDIRECT EVAPORATIVE COOLING

A new modeling and analysis method of the indirect evaporative heat exchanger based on the heat current perspective

Performance Evaluation and Comparison of Multistage Indirect Evaporative Cooling Systems in Two Operation Modes

Parameter Sensitivity Analysis of Indirect Evaporative Cooler (IEC) with Condensation from Primary Air