Abstract:The necessity of sustainable approaches in the construction sector persuades the researchers to utilize the recycled coarse aggregate (RCA) extracted from waste concrete and study the performance of structural members by substituting natural coarse aggregate (NCA) with the RCA. In the present context, the flexural performance of RAC beam was examined on fourteen numbers of beams by completely replacing the NCA with RCA and using four different longitudinal reinforcement ratios (ρ) of 1.61, 1.31, 0.75 and 0.42%. In order to improve the quality of RAC, the particle packing method (PPM) of mix design approach was employed along with the two stage mixing approach (TSMA). The improved mechanical properties owing to the combined effect of PPM design mix and TSMA are also translated in the flexural performance of RAC beams even at 100% use of RCA. A maximum reduction of 35, 4 and 5% in cracking load, yield load and ultimate load, respectively, are observed in RAC beams as compared to the conventional concrete beams. However, the undesirable shear tension mode of failure was witnessed for RAC beams at ρ = 1.61%. A database is prepared by compiling the reported experimental results of RAC beams with shear reinforcement in the available literature. The suitability of the existing expressions to predict the ultimate load is verified for RAC beams and it is observed that, the number of unconservative predictions is significant. In this scenario, an equation is proposed to predict the ultimate load of transversely reinforced RAC beams by operating the flexure database, which shows good correlation with the available experimental results. Further, the increment in shear strength of RAC beams due to the inclusion of stirrups is estimated by using the derived expression.

Structural Behaviour and Strength Prediction of Recycled Aggregate Concrete Beams

A review of experimental results on structural performance of reinforced recycled aggregate concrete beams and columns

Flexural Behavior and Durability Properties of Recycled Aggregate Concrete (RAC) Beams Subjected to Long-Term Loading and Chloride Attacks

Performance of Recycled Aggregate Concrete in A Real Project

Performance of Recycled Concrete Beams under Sustained Loads Coupled with Chloride Ion (cl−) Ingress

Fundamental behaviour of recycled aggregate concrete - Overview I: strength and deformation

Cracking of Reinforced Recycled Aggregate Concrete Beams Subjected to Loads and Steel Corrosion

STRUCTURAL BEHAVIOUR OF RECYCLED AGGREGATE CONCRETE BEAMS FLEXURAL STRENGTHENED WITH CFRP SHEETS UNDER MONOTONIC AND FATIGUE LOADING

Effect of Treated/Untreated Recycled Aggregate Concrete: Structural Behavior of RC Beams

Behavior of Shear-Critical Recycled Aggregate Concrete Beams Containing BFRP Reinforcement

Simulation of Reinforced Recycled Aggregate Concrete Frames Subjected to Seismic Loading

Experimental Study and Theoretical Prediction on the Flexural Behavior of Unbonded, Post-tensioned Precast Beams Made of Recycled Aggregate Concrete

Study on Crack Resistance and Calculation Model of RAC Beams Strengthened with Prestressed CFRP

Assessment of Reinforced Recycling Aggregate Concrete Beams Under Torsional Moment

Structural Performance Evaluation of Steel Fiber-Reinforced Concrete Beams with Recycled Coarse Aggregates

Shear behavior analysis and capacity prediction for the steel fiber reinforced concrete beam with recycled fine aggregate and recycled coarse aggregate

Shear bearing capacity of steel-reinforced recycled aggregate concrete short beams based on modified compression field theory

Performance of reinforced recycled aggregate concrete beams in flexure: experimental and critical comparative analysis

Experimental Investigation of Properties of Concrete Containing Recycled Construction Wastes

Structural Behaviour of Composite Members with Recycled Aggregate Concrete — An Overview

Shear and flexural strength of reinforced concrete beams made with recycled coarse aggregate concrete