Abstract:A Discrete Element Method (DEM), a computerized testing rig and a soil bin were used to explain soil profile deformation caused by mouldboard plough. By using DEM, the motion of particles is given by collisions between particles. Soil-tillage tool interaction simulation was established by a 3D geometry of a mouldboard plough created using PTC Creo Parametric 3D Modelling software and soil bed modeled by discrete element particles using EDEM software. A bond element was introduced between particles and cohesion of soil was formed to create a simulation of the actual cohesive soil. The horizontal and vertical forces and soil disturbance in terms of bulk density at different speeds and depths were investigated. However, the simulation experiments followed the field experiments which were conducted using a computerized testing rig. Further, reaction forces on the plough and the resulting bulk densities were estimated from the simulated results and compared with the actual results from the field. Also, the accuracy of the developed model to predict soil displacement was measured and compared with the soil bin data with the average relative error of 1.317%. The simulated results of horizontal, vertical forces and bulk density matched well with the results obtained in the field experiment with the relative error of 4.435, 3.029 and 3.119% respectively. The vertical force provided the best regression results of 0.9948 <math>R2</math> with <math>RMSE</math> of 0.5964, followed by 0.9884 <math>R2</math> with <math>RMSE</math> of 0.4089 and 0.8391 <math>R2</math> with <math>RMSE</math> of 0.5441 for horizontal force and bulk density respectively. All regression results were obtained at <math>p<0.05</math>. The ANOVA test showed that the p-values for the horizontal force, vertical force and bulk density were 0.753, 0.695 and 0.025 respectively. There was no significant difference between the simulation and experiment results for cutting forces while there was a significant difference for the bulk density at <math>p<0.05</math>. This model can be applied as an accurate, consistent and fast method of effective prediction of the final soil condition and forces needed for tillage operation.

Discrete Element Method-Based Prediction of Areas Prone to Buried Hill-Controlled Earth Fissures

Multiscale Modeling of Seepage-Induced Suffusion and Slope Failure Using a Coupled FEM–DEM Approach

A Coupled SPFEM/DEM Approach for Multiscale Modeling of Large‐deformation Geomechanical Problems

Multiscale Modelling of Normal Fault Rupture-Soil-Foundation Interaction

Simulation and prediction of high-risk areas of buried-hill-controlled earth fissures induced by groundwater exploitation

Technology of Strain Analysis and Fracture Prediction Based on DEM Numerical Simulation

Water Erosion and Extension of Ground Fissures in Weihe Basin Based on DEM-CFD Coupled Modeling

DEM–FEM Analysis of Soil Failure Process Via the Separate Edge Coupling Method

Multi-scale simulation method with coupled finite/discrete element model and its application

Prediction Model for Advanced Detection of Water-Rich Faults Using 3D Anisotropic Resistivity Modeling and Monte Carlo Methods

A Hybrid Regional Model for Predicting Ground Deformation Induced by Large-Section Tunnel Excavation

Discrete Element Modelling of a Soil-Rock Mixture Used in an Embankment Dam

Numerical Modeling of Pumping-Induced Earth Fissures Using Coupled Quasi-Static Material Point Method

Numerical Simulation of Hydraulic Fracturing Based on Discrete Element Method

Numerical simulation of the fluid-solid coupling mechanism of water and mud inrush in a water-rich fault tunnel

Impact of Initial In-Situ Stress Field on Soil Response During Cavity Expansion Using Discrete Element Simulation

Coupled Thermal-Hydro-mechanical Modeling on Characteristics of Excavation Damage Zone Around Deep Tunnels Crossing a Major Fault

Calibration of the Discrete Element Method and Modeling of Shortening Experiments

Dynamic stability analysis of jointed rock slopes using the combined finite-discrete element method (FDEM)

Integrating the Finite Element Method with a Data-Driven Approach for Dam Displacement Prediction

Prediction of cutting forces and soil behavior with discrete element simulation