High Performance Medium- and Long-Chain Diester Electrical Insulating Oil Biosynthesized Via Lipase Catalyzation
Liangxuan Ouyang,Feipeng Wang,Qiuhuang Han,Jian Li,Yang Xu,Yihua Qian,Massimo Pompili,Fabio Scatiggio,Campi Giorgio,Pawel Rozga,Yibo Ren
DOI: https://doi.org/10.1109/tdei.2023.3294451
IF: 2.509
2023-01-01
IEEE Transactions on Dielectrics and Electrical Insulation
Abstract:Synthetic ester (SE) insulating oils have been more widely researched owing to their tailorable performance to satisfy the more rigorous oil requirements for power transformers. In this article, three biodegradable diesters [neopentyl glycol oleic acid diester (NPOE), neopentyl glycol caprylic-capric acid diester (NPCE), and neopentyl glycol caprylic-capric-oleic acid diester (NCOE)] based high performance electrical insulating oils were prepared by the esterification of neopentyl glycol (NPG) with C18, blends of C8 and C10, and blends of C8, C10, and C18, respectively. The high conversion yield of NPG is achieved by optimum conditions: e.g., on NPCE fatty acids to NPG molar ratio of 2:1, the initial water content of 1 wt%, water absorbent's adding at onset moment, three batches of adding NPG, the catalyst (IM 100) dosage of 1 wt%, and temperature of 50 degree celsius. As compared to chemical catalyzation, enzymatic catalyzation displays milder reaction conditions, no toxicity, and no formation of side products. After the purification of vacuum distillation, adsorption, and filtration, the physicochemical properties of the three synthetic diesters were characterized. As a result, the optimized synthetic diester (NCOE) is recognized by the lowest pour point (-57 degree celsius), sufficiently high flash point (closed cup similar to 200 degree celsius, open cup similar to 214 degree celsius), fire point (234 degree celsius), and initial oxidative temperature (IOT) (196.6 degree celsius). The high performance of the insulating oil (NCOE) is also identified by the excellent ac breakdown voltage (67.3 kV) and moisture resistance. This work offers a green and low energy consumption approach for producing a high-performance synthetic insulating oil, which is expected for scale-up production and application in power transformers.