Abstract:In a voltage-source converter dc grid, a dc fault current limiter (FCL) is a key apparatus. When faults occur, it is supposed to effectively and immediately suppress transient short-circuit current to protect other equipment, e.g., converters. Additionally, it is required to bring as little negative effect as possible under normal operation. Although the respective advantages are highlighted in different FCLs, one or two key disadvantages can significantly decrease the overall performance. In this article, a novel magnetic coupling FCL (MCFCL) is proposed and achieves a good balance among its advantages and disadvantages. An MCFCL consists of a mutual inductor and some power electronic switch modules. The mutual inductor metallic primary winding is connected in series to the transmission line and magnetically coupled with the secondary winding. The secondary side impedance is controlled by the power electronic switch modules. The novel 4-segment model is proposed to demonstrate the current-limiting physics, formulate the current-limiting effect, and support the design. One medium voltage (10 kV) case study is carried out based on the numerical simulation. The MCFCL shows a better current-suppressing effect and a lower impedance under normal operation than the benchmark Reactor FCL. Finally, this article is validated on a scaled-down experimental facility.

Performance Investigation on a Novel High Inductance Changing Ratio MMC-Based Direct Current System Saturated Core FCL

Two-Stage DC Fault Current Limiter Combining Hybrid Magnetic Materials and Active Flux Coupling Coils

Hybrid Multifunctional Saturated-core Fault Current Limiter

Topology and Performance Optimization of a Novel Hybrid Material-Based Direct Current Fault Current Limiter

A Novel Three Limb Topology of a Saturated Core Fault Current Limiter in HVDC System

A Novel Modularization Design Method of PM Biased SCFCL Considering Leakage Flux Effect and Permeance Matrix Modeling

Performance Investigation on DCSFCL Considering Different Magnetic Materials

A Novel Six-Leg Three-Phase Fault Current Limiter

Hybrid-Material Based Saturated Core FCL in HVDC System: Modeling, Analyzing and Performance Testing

Optimized Design Method of Permanent Magnets Saturated Core Fault Current Limiters for HVDC Applications

Topology Modeling and Design of a Novel Magnetic Coupling Fault Current Limiter for VSC DC Grids

Performance Evaluation Approach of Superconducting Fault Current Limiter in MMC-HVDC Transmission System

A novel concept of fault current limiter based on saturable core in high voltage DC transmission system

Design and Evaluation of a Novel Non-Inductive Unit for a High Temperature Superconducting Fault Current Limiter (SFCL) with Bias Magnetic Field

Design and Test of a Magnetic Saturation‐type Fault Current Limiter

Topology and Experimental Study on a Novel Magnetic-Controlled Switcher Type Fault Current Limiter

Development of a Hybrid Fault Current Limiter Using Liquid Metal for Large Capacity MVdc Power Systems

Study Of The Three-Phase Saturated Transformer Coupling New Bridge-Type Ssfcl

Study of Superconducting Fault Current Limiters for MMC-MTDC with HVDC CBs

An Economical Three-Phase Fault Current Limiter Considering Different Types of Fault

A Novel Multi-Function Saturated-Core Fault Current Limiter