3D Biofabrication of Microfiber-Laden Minispheroids: a Facile 3D Cell Co-Culturing System

Mingjun Xie,Qing Gao,Jingjiang Qiu,Jianzhong Fu,Zichen Chen,Yong He

DOI: https://doi.org/10.1039/c9bm01189g

2020-01-01

Biomaterials Science

Abstract:Hierarchical tissues composed of spheroid and fiber structures such as tumors, embryos and glomeruli widely exist in organisms.

What problem does this paper attempt to address?

Projection-based 3D Bioprinting for Hydrogel Scaffold Manufacturing

Sun Yuan,Yu Kang,Gao Qing,He Yong

DOI: https://doi.org/10.1007/s42242-022-00189-0

2022-01-01

Bio-Design and Manufacturing

Abstract:Projection-based 3D bioprinting(PBP):a powerful method to fabricate 3D cellular structures Three-dimensional(3D)bioprinting has played an impor-tant role in tissue engineering and regenerative medicine areas over the past decade[1].Different from traditional cell cultures in Petri dishes,3D bioprinting can build bionic structures with a better potential to become artificial organ substitutes[2-4].With the development of photocurable bio-materials,the projection-based 3D printing method has been successfully applied in biological research[5,6].It pos-sesses significant advantages in precision and speed due to its unique manufacturing principle.On the one hand,light-dependent solidification allows it to build models with resolutions around 50 μm(theoretically a minimum of 1 μm)[7].On the other hand,its surface-to-entity printing process provides duplicates in batches without extra time require-ment[8].Therefore,it has attracted the attention of many researches devoted to the field of 3D cell culture.
Fabrication and Evaluation of Electrohydrodynamic Jet 3d Printed Polycaprolactone/Chitosan Cell Carriers Using Human Embryonic Stem Cell-Derived Fibroblasts

Yang Wu,Gopu Sriram,Amr S. Fawzy,Jerry Y. H. Fuh,Vinicius Rosa,Tong Cao,Yoke San Wong

DOI: https://doi.org/10.1177/0885328216652537

2016-01-01

Journal of Biomaterials Applications

Abstract:Biological function of adherent cells depends on the cell–cell and cell–matrix interactions in three-dimensional space. To understand the behavior of cells in 3D environment and their interactions with neighboring cells and matrix requires 3D culture systems. Here, we present a novel 3D cell carrier scaffold that provides an environment for routine 3D cell growth in vitro. We have developed thin, mechanically stable electrohydrodynamic jet (E-jet) 3D printed polycaprolactone and polycaprolactone/Chitosan macroporous scaffolds with precise fiber orientation for basic 3D cell culture application. We have evaluated the application of this technology by growing human embryonic stem cell-derived fibroblasts within these 3D scaffolds. Assessment of cell viability and proliferation of cells seeded on polycaprolactone and polycaprolactone/Chitosan 3D-scaffolds show that the human embryonic stem cell-derived fibroblasts could adhere and proliferate on the scaffolds over time. Further, using confocal microscopy we demonstrate the ability to use fluorescence-labelled cells that could be microscopically monitored in real-time. Hence, these 3D printed polycaprolactone and polycaprolactone/Chitosan scaffolds could be used as a cell carrier for in vitro 3D cell culture-, bioreactor- and tissue engineering-related applications in the future.
Bioprinting of Cell-Laden Microfiber: Can It Become a Standard Product?

Lei Shao,Qing Gao,Chaoqi Xie,Jianzhong Fu,Meixiong Xiang,Yong He

DOI: https://doi.org/10.1002/adhm.201900014

2019-01-01

Abstract:Hydrogel microfibers have many fascinating applications as microcarriers for drugs, factors, and cells, such as 3D cell culture, building micro-organoids, and transplantation therapy due to their simple structures. It is unknown whether cell-laden fiber can become a standard-use product like woundplast. Here, from the technical and practical view, the elements required for user-oriented microfibers are first discussed: i) the materials used should promote cell functionalization and be easily processed; ii) follow a manufacturing method for mass fabrication; iii) have the ability to be stored long-term and be available for immediate use. Here, it is demonstrated that bioactive microfibers can be simply fabricated with coaxial bioprinting using gelatin methacrylate due to its tunable biological and mechanical properties. Additionally, programmed microfibers and 3D constructs with controllable composition can also be fabricated. These microfibers can be used to directly build organoids and complex co-culture tissue models. In the present study, vascular organoid, angiogenic sprouts, and tumor angiogenesis are demonstrated. It is also demonstrated, for the first time, that the cell-laden microfibers can be stored long-term via cryopreservation. These results show that cell-laden structures can be developed as a novel type of organoid product, which will open more avenues for tissue engineering and clinical organ repair.
Fabrication of heterocellular spheroids with controllable core-shell structure using inertial focusing effect for scaffold-free 3D cell culture models

Tan Tang,Pengfei Zhang,Qiuting Zhang,Xingkun Man,Ye Xu

DOI: https://doi.org/10.1088/1758-5090/ad647e

2024-07-19

Biofabrication

Abstract:Three-dimensional (3D) cell culture models capable of emulating the biological functions of natural tissues are pivotal in tissue engineering and regenerative medicine. Despite progress, the fabrication of in vitro heterocellular models that mimic the intricate structures of natural tissues remains a significant challenge. In this study, we introduce a novel, scaffold-free approach leveraging the inertial focusing effect in rotating hanging droplets for the reliable production of heterocellular spheroids with controllable core-shell structures. Our method offers precise control over the core-shell spheroid's size and geometry by adjusting the cell suspension density and droplet morphology. We successfully applied this technique to create hair follicle organoids, integrating dermal papilla cells within the core and epidermal cells in the shell, thereby achieving markedly enhanced hair inducibility compared to mixed-structure models. Furthermore, we have developed melanoma tumor spheroids that accurately mimic the dynamic interactions between tumor and stromal cells, showing increased invasion capabilities and altered expressions of cellular adhesion molecules and proteolytic enzymes. These findings underscore the critical role of cellular spatial organization in replicating tissue functionality in vitro. Our method represents a significant advancement towards generating heterocellular spheroids with well-defined architectures, offering broad implications for biological research and applications in tissue engineering.

engineering, biomedical,materials science, biomaterials
Structure-induced Cell Growth by 3D Printing of Heterogeneous Scaffolds with Ultrafine Fibers

Chaoqi Xie,Qing Gao,Peng Wang,Lei Shao,Huipu Yuan,Jianzhong Fu,Wei Chen,Yong He

DOI: https://doi.org/10.1016/j.matdes.2019.108092

IF: 9.417

2019-01-01

Materials & Design

Abstract:Cell-scaffold interactions have drawn significant attention in tissue engineering. In this study, we define a heterogeneous scaffold, which can be customized with respect to gradient strength, variable fiber diameter, and pore sizes. Heterogeneous scaffolds with ultrafine fibers (3-22 mu m in diameter) can be printed via high-resolution melt electrowriting (MEW) using only one nozzle by adjusting the printing parameters. With precise control of the diameter of deposited fibers, complex patterns, such as a star, Tai Chi, and an eagle can be fabricated. Owing to the ultrafine fiber and heterogeneous design, cell-scaffold interaction and other occurrences were observed. The size of the diameter of the printed fiber is close to that of cells (tens of microns), smaller than those of conventional 3D printed scaffolds (100 mu m or more), and cell adhesion is highly sensitive to variations in fiber diameter. By specifically arranging thick and thin fibers, cells can be induced to elongate in anticipated direction in a grid. In this study, cell alignment exhibited 4 different orientations in a single scaffold with 4 regions, separately. The scaffolds can also be heterogeneous in pore size. In this study, the proliferation speed of the cells in small pores is 3 times that of the cells in large pores. Moreover, various pore sizes and fibers can be integrated in one scaffold, allowing the control of cell growth to different statuses by adjusting the scaffold structures. This study generally presents a strategy for structure-induced cell growth for better simulating in vivo environment. (C) 2019 The Authors. Published by Elsevier Ltd.
Microfabrication methods for 3D spheroids formation and their application in biomedical engineering

Sujeong Ahn,Dohyun Kim,Kanghee Cho,Won-Gun Koh

DOI: https://doi.org/10.1007/s11814-022-1327-5

IF: 2.7

2023-02-03

Korean Journal of Chemical Engineering

Abstract:Three-dimensional cell culture systems offer greater understanding of the complex human body structure than monolayer cell cultures. Spheroids, which are the most useful and controllable types of three-dimensional cell formations, are discussed in this review. Conventional spheroid fabrication methods have limitations for the mass production of uniformly sized spheroids, which hinders their further application. As an alternative, microfabrication methods have been proposed to overcome the drawbacks of existing methods. Microfabrication technologies include micropatterning, 3D bioprinting, and microfluidics. Microwell arrays and surface-modified micropatterns can be fabricated through micropatterning methods, and these scaffolds result in the mass production of spheroids with size uniformity. 3D bioprinting technology enables uniformly sized spheroid production at desired locations, and microfluidics allows production of uniform size-controlled spheroids in a large quantity Recently, efforts have been made to apply 3D spheroid culture systems to regenerative medicine, the study of the tumor microenvironment, drug screening, and organoid fabrication. The 3D spheroid system is an attractive substitute for overcoming the limitations of the conventional 2D culture platform, which cannot precisely imitate in vivo physiological environments. Microfabrication methods for spheroids enhance the effectiveness of spheroid formation, allowing for mass production, size control, and spheroid localization. Microfabrication methods have remarkable potential for spheroid utilization in the biomedical field.

engineering, chemical,chemistry, multidisciplinary
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique

Yongnian Yan,Xiaohong Wang,Yuqiong Pan,Haixia Liu,Jie Cheng,Zhuo Xiong,Feng Lin,Rendong Wu,Renji Zhang,Qingping Lu

DOI: https://doi.org/10.1016/j.biomaterials.2005.02.027

IF: 14

Biomaterials

Abstract:We have recently developed an organ manufacturing technique that enables us to form cell/biomaterial complex three-dimensional (3D) architectures in designed patterns. This technique employs a highly accurate 3D micropositioning system with a pressue-controlled syringe to deposit cell/biomaterial structures with a lateral resolution of 10 microm. The pressure-activated micro-syringe is equipped with a fine-bore exit needle using which a wide variety of 3D patterns with different arrays of channels (through-holes) were created. The channels can supply living cells with nutrients and allow removing the cell metabolites. The embedded cells remain viable and perform biological functions as long as the 3D structures are retained. The new technology has the potential for eventual high-throughput production of artificial human tissues and organs.
Fabrication of Highly Modulable Fibrous 3D Extracellular Microenvironments

Xixiang Zhang,Fangfei Han,Ahad Syed,Ebtihaj M. Bukhari,Basil Chew Joo Siang,Shan Yang,Bingpu Zhou,Wei-jia Wen,Dechen Jiang

DOI: https://doi.org/10.1007/s10544-017-0187-y

2017-01-01

Biomedical Microdevices

Abstract:Three-dimensional (3D) in vitro scaffolds that mimic the irregular fibrous structures of in vivo extracellular matrix (ECM) are critical for many important biological applications. However, structural properties modulation of fibrous 3D scaffolds remains a challenge. Here, we report the first highly modulable 3D fibrous scaffolds self-assembled by high-aspect-ratio (HAR) microfibers. The scaffolds structural properties can be easily tailored to incorporate various physical cues, including geometry, stiffness, heterogeneity and nanotopography. Moreover, the fibrous scaffolds are readily and accurately patterned on desired locations of the substrate. Cell culture exhibits that our scaffolds can elicit strong bidirectional cell-material interactions. Furthermore, a functional disparity between the two-dimensional substrate and our 3D scaffolds is identified by cell spreading and proliferation data. These results prove the potential of the proposed scaffold as a biomimetic extracellular microenvironment for cell study.
Microfluidic fiber spinning for 3D bioprinting: Harnessing microchannels to build macrotissues

Federico Serpe,Carlo Massimo Casciola,Giancarlo Ruocco,Gianluca Cidonio,Chiara Scognamiglio

DOI: https://doi.org/10.36922/ijb.1404

2024-01-02

International Journal of Bioprinting

Abstract:Microfluidics is rapidly revolutionizing the scientific panorama, providing unmatched high-throughput platforms that find application in numerous areas of physics, chemistry, biology, and materials science. Recently, microfluidic chips have been proposed, in combination with bioactive materials, as promising tools for spinning cell-laden fibers with on-demand characteristics. However, cells encapsulated in filaments produced via microfluidic spinning technology are confined in a quasi-three-dimensional (3D) environment that fails to replicate the intricate 3D architecture of biological tissues. Thanks to the recent synergistic combination of microfluidic devices with 3D bioprinting technologies that enable the production of sophisticated microfibers serving as the backbone of 3D structures, a new age of tissue engineering is emerging. This review looks at how combining microfluidics with 3D printing is contributing to the biofabrication of relevant human substitutes and implants. This paper also describes the whole manufacturing process from the production of the microfluidic tool to the printing of tissue models, focusing on cutting-edge fabrication technologies and emphasizing the most noticeable achievements for microfluidic spinning technology. A theoretical insight for thixotropic hydrogels is also proposed to predict the fiber size and shear stress developing within microfluidic channels. The potential of using microfluidic chips as bio-printheads for multi-material and multi-cellular bioprinting is discussed, highlighting the challenges that microfluidic bioprinting still faces in advancing the field of biofabrication for tissue engineering and regenerative medicine purposes.

engineering, biomedical,materials science, biomaterials
Fiber-Based Mini Tissue with Morphology-Controllable GelMA Microfibers

Lei Shao,Qing Gao,Haiming Zhao,Chaoqi Xie,Jianzhong Fu,Zhenjie Liu,Meixiang Xiang,Yong He

DOI: https://doi.org/10.1002/smll.201802187

IF: 13.3

Small

Abstract:The use of microscale fibers could facilitate nutrient diffusion in fiber-based tissue engineering and improve cell survival. However, in order to build a functional mini tissue such as muscle fibers, nerve conduits, and blood vessels, hydrogel microfibers should not only mimic the structural features of native tissues but also offer a cell-favorable environment and sufficient strength for tissue functionalization. Therefore, an important goal is to fabricate morphology-controllable microfibers with appropriate hydrogel materials to mimic the structural and functional complexity of native tissues. Here, gelatin methacrylate (GelMA) is used as the fiber material due to its excellent biological performance, and a novel coaxial bioprinting method is developed to fabricate morphology-controllable GelMA microfibers encapsulated in calcium alginate. By adjusting the flow rates, GelMA microfibers with straight, wavy, and helical morphologies could be obtained. By varying the coaxial nozzle design, more complex GelMA microfibers such as Janus, multilayered, and double helix structures could be fabricated. Using these microfibers, mini tissues containing human umbilical cord vein endothelial cells are built, in which cells gradually migrate and connect to form lumen resembling blood vessels. The merits of cytocompatibility, structural diversity, and mechanical tunability of the versatile microfibers may open more avenues for further biomedical research.
Controlled Fabrication of Bioactive Microfibers for Creating Tissue Constructs Using Microfluidic Techniques

Yao Cheng,Yunru Yu,Fanfan Fu,Jie Wang,Luoran Shang,Zhongze Gu,Yuanjin Zhao

DOI: https://doi.org/10.1021/acsami.5b11445

2016-01-01

Abstract:The fabrication of heterogeneous microstructures, which exert precise control over the distribution of different cell types within biocompatible constructs, is important for many tissue engineering applications. Here, bioactive microfibers with tunable morphologies, structures, and components are generated and employed for creating different tissue constructs. Multibarrel capillary microfluidics with multiple laminar flows are used for continuously spinning these microfibers. With an immediate gelation reaction of the cell dispersed alginate solutions, the cell-laden alginate microfibers with the tunable morphologies and structures as the designed multiple laminar flows can be generated. The performances of the microfibers in cell culture are improved by incorporating bioactive polymers, such as extracellular matrix (ECM) or methacrylated gelatin (GelMA), into the alginate. It is demonstrated that a series of complex three-dimensional (3D) architectural cellular buildings, including biomimic vessels and scaffolds, can be created using these bioactive microfibers.
Design of capillary microfluidics for spinning cell-laden microfibers

Yunru Yu,Luoran Shang,Jiahui Guo,Jie Wang,Yuanjin Zhao

DOI: https://doi.org/10.1038/s41596-018-0051-4

Abstract:This protocol describes the design of capillary microfluidics for spinning bioactive (cell-laden) microfibers for three-dimensional (3D) cell culture and tissue-engineering applications. We describe the assembly of three types of microfluidic systems: (i) simple injection capillary microfluidics for the spinning of uniform microfibers; (ii) hierarchical injection capillary microfluidics for the spinning of core-shell or spindle-knot structured microfibers; and (iii) multi-barrel injection capillary microfluidics for the spinning of microfibers with multiple components. The diverse morphologies of these bioactive microfibers can be further assembled into higher-order structures that are similar to the hierarchical structures in tissues. Thus, by using different types of capillary microfluidic devices, diverse styles of microfibers with different bioactive encapsulation can be generated. These bioactive microfibers have potential applications in 3D cell culture, the mimicking of vascular structures, the creation of synthetic tissues, and so on. The whole protocol for device fabrication and microfiber spinning takes ~1 d.
Rapid Assembling Organ Prototypes with Controllable Cell-Laden Multi-Scale Sheets

Qing Gao,Peng Zhao,Ruijian Zhou,Peng Wang,Jianzhong Fu,Yong He

DOI: https://doi.org/10.1007/s42242-019-00032-z

2019-01-01

Bio-Design and Manufacturing

Abstract:A native organ has heterogeneous structures, strength, and cell components. It is a big challenge to fabricate organ prototypes with controllable shapes, strength, and cells. Herein, a hybrid method is developed to fabricate organ prototypes with controlled cell deposition by integrating extrusion-based 3D printing, electrospinning, and 3D bioprinting. Multi-scale sheets were first fabricated by 3D printing and electrospinning; then, all the sheets were assembled into organ prototypes by sol–gel reaction during bioprinting. With this method, macroscale structures fabricated by 3D printing ensure the customized structures and provide mechanical support, nanoscale structures fabricated by electrospinning offer a favorable environment for cell growth, and different types of cells with controllable densities are deposited in accurate locations by bioprinting. The results show that L929 mouse fibroblasts encapsulated in the structures exhibited over 90% survival within 10 days and maintained a high proliferation rate. Furthermore, the cells grew in spherical shapes first and then migrated to the nanoscale fibers showing stretched morphology. Additionally, a branched vascular structure was successfully fabricated using the presented method. Compared with other methods, this strategy offers an easy way to simultaneously realize the shape control, nanofibrous structures, and cell accurate deposition, which will have potential applications in tissue engineering.
Bioassembly of multicellular spheroids to mimic complex tissue structure using surface-modified magnetized nanofibers

Hayeon Byun,Sang Min Lee,Heungsoo Shin

DOI: https://doi.org/10.1088/1758-5090/ad1cf2

2024-01-11

Biofabrication

Abstract:Advancements in biofabrication have led to major strides toward creating authentic organ models; however, replicating intricate organ structures without scaffolds remains challenging. In this study, we introduce a method utilizing surface-modifiable magnetic nanofibers to achieve precise control over spheroid functions and geometrical features, allowing the creation of multiple functional domains within a single microtissue. We generated magnetized nanofibers by electrospinning magnetic nanoparticles dispersed in poly-L-lactic acid solution. These fibers were then coated with polydopamine (PD) to enhance their biological functions, particularly reactive oxygen species (ROS) scavenging. These PD-coated magnetic fibers (PMFs) had magnetic-responsive properties when incorporated into human dermal fibroblast spheroids (0.019±0.001 emu/g). Furthermore, PMFs within the spheroids effectively regulated ROS levels by upregulating the expression of key anti-oxidative genes such as SOD-1 (2.2±0.1) and GPX-1 (2.6±0.1). By exploiting the magnetic responsiveness of spheroids, we were able to assemble them into various structures such as linear, triangular, and square structures using remotely applied magnetic forces. Within the assembled 3D constructs, the cells in spheroids incorporating PMFs demonstrated resistance to ROS regulatory activity in the presence of hydrogen peroxide, while spheroids composed of bare fibers exhibited high ROS levels. Furthermore, we assembled spheroids containing fibroblasts and endothelial cells into complex tissue structures resembling vessels under magnetic manipulation. This innovative method holds tremendous promise for organ modeling and regenerative medicine due to the unprecedented control it allows in developing microtissues that closely emulate real organs.

engineering, biomedical,materials science, biomaterials
3D Microtissues for Injectable Regenerative Therapy and High-throughput Drug Screening.

Yaqian Li,Xiaojun Yan,Wei Liu,Lyu Zhou,Zhifeng You,Yanan Du

DOI: https://doi.org/10.3791/55982

2017-01-01

Abstract:To upgrade traditional 2D cell culture to 3D cell culture, we have integrated microfabrication with cryogelation technology to produce macroporous microscale cryogels (microcryogels), which can be loaded with a variety of cell types to form 3D microtissues. Herein, we present the protocol to fabricate versatile 3D microtissues and their applications in regenerative therapy and drug screening. Size and shape-controllable microcryogels can be fabricated on an array chip, which can be harvested off-chip as individual cell-loaded carriers for injectable regenerative therapy or be further assembled on-chip into 3D microtissue arrays for high-throughput drug screening. Due to the high elastic nature of these microscale cryogels, the 3D microtissues exhibit great injectability for minimally invasive cell therapy by protecting cells from mechanical shear force during injection. This ensures enhanced cell survival and therapeutic effect in the mouse limb ischemia model. Meanwhile, assembly of 3D microtissue arrays in a standard 384-multi-well format facilitates the use of common laboratory facilities and equipment, enabling high-throughput drug screening on this versatile 3D cell culture platform.
Modulation of Cell Behavior by 3D Biocompatible Hydrogel Microscaffolds with Precise Configuration

Wei-Cai Zhang,Mei-Ling Zheng,Jie Liu,Feng Jin,Xian-Zi Dong,Min Guo,Teng Li

DOI: https://doi.org/10.3390/nano11092325

IF: 5.3

2021-09-07

Nanomaterials

Abstract:Three-dimensional (3D) micronano structures have attracted much attention in tissue engineering since they can better simulate the microenvironment in vivo. Two-photon polymerization (TPP) technique provides a powerful tool for printing arbitrary 3D structures with high precision. Here, the desired 3D biocompatible hydrogel microscaffolds (3D microscaffold) with structure design referring to fibroblasts L929 have been fabricated by TPP technology, particularly considering the relative size of cell seed (cell suspension), spread cell, strut and strut spacing of scaffold. Modulation of the cell behavior has been studied by adjusting the porosity from 69.7% to 89.3%. The cell culture experiment results reveal that the obvious modulation of F-actin can be achieved by using the 3D microscaffold. Moreover, cells on 3D microscaffolds exhibit more lamellipodia than those on 2D substrates, and thus resulting in a more complicated 3D shape of single cell and increased cell surface. 3D distribution can be also achieved by employing the designed 3D microscaffold, which would effectively improve the efficiency of information exchange and material transfer. The proposed protocol enables us to better understand the cell behavior in vivo, which would provide high prospects for the further application in tissue engineering.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Airflow-Assisted 3D Bioprinting of Human Heterogeneous Microspheroidal Organoids with Microfluidic Nozzle.

Haiming Zhao,Yishan Chen,Lei Shao,Mingjun Xie,Jing Nie,Jingjiang Qiu,Peng Zhao,Hamed Ramezani,Jianzhong Fu,Hongwei Ouyang,Yong He

DOI: https://doi.org/10.1002/smll.201802630

IF: 13.3

2018-01-01

Small

Abstract:Hydrogel microspheroids are widely used in tissue engineering, such as injection therapy and 3D cell culture, and among which, heterogeneous microspheroids are drawing much attention as a promising tool to carry multiple cell types in separated phases. However, it is still a big challenge to fabricate heterogeneous microspheroids that can reconstruct built-up tissues' microarchitecture with excellent resolution and spatial organization in limited sizes. Here, a novel airflow-assisted 3D bioprinting method is reported, which can print versatile spiral microarchitectures inside the microspheroids, permitting one-step bioprinting of fascinating hydrogel structures, such as the spherical helix, rose, and saddle. A microfluidic nozzle is developed to improve the capability of intricate cell encapsulation with heterotypic contact. Complex structures, such as a rose, Tai chi pattern, and single cell line can be easily printed in spheroids. The theoretical model during printing is established and process parameters are systematically investigated. As a demonstration, a human multicellular organoid of spirally vascularized ossification is reconstructed with this method, which shows that it is a powerful tool to build mini tissues on microspheroids.
3D Construction of Shape-Controllable Tissues through Self-Bonding of Multicellular Microcapsules

Zhiqiang Zheng,Huaping Wang,Jianing Li,Qing Shi,Juan Cui,Tao Sun,Qiang Huang,Toshio Fukuda

DOI: https://doi.org/10.1021/acsami.9b05108

2019-07-03

Abstract:Designed microtissues that replicate highly ordered three-dimensional (3D) multicellular in vivo structures have shown huge potential in biomedical research and drug discovery. Through microencapsulation and microfluidic techniques, cell-laden microcapsules have been widely used as pathological or pharmacological models. However, most conventional microtissue construction strategies can only engineer simply predefined microcapsules with monotonous biological components in two dimensions. Here, we propose a flexible 3D microtissue construction method through self-bonding of real-time shape-programmable microcapsules. The microcapsules are prepared by photo-induced electrodeposition of cell-laden alginate hydrogel and flexibly tailored into tissue-specific shapes, sizes, and arbitrary biocomponents. With the local fluidics-guided assembly, the microcapsules are spatially organized into 3D perfectly aligned microtissues. To mimic in vivo intercellular connection, the aligned microcapsules are precoated with fibroblasts to self-bond the adjacent layers into a robust assemblage through fibroblast-extracellular matrix interactions, which highly reproduces the tissue morphogenesis in natural organisms. As a typical complex tissue model, the 3D hepatic lobule was engineered utilizing HepG2 cells seeded into microcapsules with a fibroblast coating, and its biofunction including albumin and urea secretion was improved by nearly two-fold compared with cells seeded without a fibroblast coating. We anticipate that our method will be capable of regenerating more complex multicellular constructs with unprecedented possibilities for future tissue engineering applications.
Microfluidics-Based Fabrication of Cell-Laden Hydrogel Microfibers for Potential Applications in Tissue Engineering.

Gen Wang,Luanluan Jia,Fengxuan Han,Jiayuan Wang,Li Yu,Yingkang Yu,Gareth Turnbull,Mingyu Guo,Wenmiao Shu,Bin Li

DOI: https://doi.org/10.3390/molecules24081633

2019-01-01

Abstract:Fibrous hydrogel scaffolds have recently attracted increasing attention for tissue engineering applications. While a number of approaches have been proposed for fabricating microfibers, it remains difficult for current methods to produce materials that meet the essential requirements of being simple, flexible and bio-friendly. It is especially challenging to prepare cell-laden microfibers which have different structures to meet the needs of various applications using a simple device. In this study, we developed a facile two-flow microfluidic system, through which cell-laden hydrogel microfibers with various structures could be easily prepared in one step. Aiming to meet different tissue engineering needs, several types of microfibers with different structures, including single-layer, double-layer and hollow microfibers, have been prepared using an alginate-methacrylated gelatin composite hydrogel by merely changing the inner and outer fluids. Cell-laden single-layer microfibers were obtained by subsequently seeding mouse embryonic osteoblast precursor cells (MC3T3-E1) cells on the surface of the as-prepared microfibers. Cell-laden double-layer and hollow microfibers were prepared by directly encapsulating MC3T3-E1 cells or human umbilical vein endothelial cells (HUVECs) in the cores of microfibers upon their fabrication. Prominent proliferation of cells happened in all cell-laden single-layer, double-layer and hollow microfibers, implying potential applications for them in tissue engineering.
Facile preparation of a novel mulberry silk fibroin scaffold for three-dimensional tumor cell culture

k xin,puyuan wu,rutian li,jia wei,huizi sha,yajun zhang,xiqun jiang,ying huang,lixia yu,baorui liu

DOI: https://doi.org/10.1016/j.matlet.2014.12.075

IF: 3

2015-01-01

Materials Letters

Abstract:Three-dimensional (3D) culture methods, building a bridge between the traditional two-dimensional (2D) monolayer cell culture and the in-vivo conditions, launch a new era in cell culture. A reliable and stable method for 3D cell culture is required for further cytology research or chemosensitivity tests, considering its high similarity with conditions in vivo. Here we present a novel 3D tumor cell culture model based on mulberry silk fibroin derived from Bombyx mori, which is easy to access in China. This is a biocompatible 3D silk fibroin scaffold, without adding any toxic organic solvents, surfactants or other toxic agents during the preparation process. We investigated its microstructure and confirmed that the gastric cancer cell lines were successfully seeded and grown on the scaffold. In conclusion, the silk fibroin scaffold, as a promising 3D cell culture model, has the potential for more accurate cytology research and clinical chemosensitivity tests in the future.

3D Biofabrication of Microfiber-Laden Minispheroids: a Facile 3D Cell Co-Culturing System

Projection-based 3D Bioprinting for Hydrogel Scaffold Manufacturing

Fabrication and Evaluation of Electrohydrodynamic Jet 3d Printed Polycaprolactone/Chitosan Cell Carriers Using Human Embryonic Stem Cell-Derived Fibroblasts

Bioprinting of Cell-Laden Microfiber: Can It Become a Standard Product?

Fabrication of heterocellular spheroids with controllable core-shell structure using inertial focusing effect for scaffold-free 3D cell culture models

Structure-induced Cell Growth by 3D Printing of Heterogeneous Scaffolds with Ultrafine Fibers

Microfabrication methods for 3D spheroids formation and their application in biomedical engineering

Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique

Fabrication of Highly Modulable Fibrous 3D Extracellular Microenvironments

Microfluidic fiber spinning for 3D bioprinting: Harnessing microchannels to build macrotissues

Fiber-Based Mini Tissue with Morphology-Controllable GelMA Microfibers

Controlled Fabrication of Bioactive Microfibers for Creating Tissue Constructs Using Microfluidic Techniques

Design of capillary microfluidics for spinning cell-laden microfibers

Rapid Assembling Organ Prototypes with Controllable Cell-Laden Multi-Scale Sheets

Bioassembly of multicellular spheroids to mimic complex tissue structure using surface-modified magnetized nanofibers

3D Microtissues for Injectable Regenerative Therapy and High-throughput Drug Screening.

Modulation of Cell Behavior by 3D Biocompatible Hydrogel Microscaffolds with Precise Configuration

Airflow-Assisted 3D Bioprinting of Human Heterogeneous Microspheroidal Organoids with Microfluidic Nozzle.

3D Construction of Shape-Controllable Tissues through Self-Bonding of Multicellular Microcapsules

Microfluidics-Based Fabrication of Cell-Laden Hydrogel Microfibers for Potential Applications in Tissue Engineering.

Facile preparation of a novel mulberry silk fibroin scaffold for three-dimensional tumor cell culture