Abstract:Catalytic decomposition of benzene was studied by using oxides of vanadium and tungsten supported on titanium oxide (TiO2) catalysts for effective reduction of emissions of toxic organic compounds from waste incineration. Experiments were conducted to evaluate the effects of the catalyst's composition, and operating conditions on benzene decomposition, and the relationship between molecular structures of catalysts and their activity was also investigated through replacing the conventional TiO2 catalyst support by nano-sized TiO2. Trace levels (1 and 10 ppm) of gaseous benzene were catalytically decomposed in a fixed-bed catalytic reactor with monolithic oxides of vanadium and tungsten supported on titanium oxide (V2O5-WO3/TiO2) catalysts under conditions simulating the cooling of waste incineration flue gas. On-line monitoring of trace benzene concentrations before and after the catalyst was achieved by means of resonance enhanced multiphoton ionization-time of flight mass spectrometry (REMPI-TOFMS). Catalysts were characterized by nitrogen adsorption, X-ray diffraction, energy dispersive X-ray spectroscopy, temperature-programmed reduction, and Raman spectroscopy. The effects of several parameters, including catalyst operating temperature, space velocity (SV) and initial benzene concentration, on catalytic oxidation of benzene were investigated. Experimental results indicate that reduction of the initial benzene concentration from 10 to 1 ppm either enhances or decreases the catalytic removal efficiency depending on the adsorption capability as well as the oxidation ability of the catalyst tested. The catalytic activity for benzene oxidation not simply relies on the vanadium content of the catalyst; the molecular structure of vanadium oxide, which is known to be influenced by both vanadium oxide loading and the type of support, is very important. Nano-sized TiO2 supported vanadium oxide catalyst (VWNT) with lowest V loading (0.75 wt.%) provides higher catalytic activity than those of the catalysts with higher V contents (1.31 and 2.92 wt.%) but supported by conventional TiO2 (VWT1 and VWT2). The relatively higher catalytic activity of VWNT may be attributed to: (a) the presence of monomeric VOx species, with one terminal V=O bond as indicated by Raman spectra; (b) fewer impurities confounding active catalytic constituents (V, W and Ti); (c) pure anatase phase of TiO2 rather than a mixture phase of anatase and rutile servicing as catalyst support besides its nano-scale particle size; (d) larger specific surface area, smaller average pore diameter, and narrower pore size distribution contribute higher adsorption ability for benzene. No obvious competition effect between NOx removal and benzene oxidation was observed in this study. Reaction rate constants and activation energies for benzene catalytic oxidation tested by the catalysts were calculated. Lower activation energy obtained from VWNT than those of the two catalysts further confirming the higher catalytic activity of VWNT. Published by Elsevier B.V.

Elimination of Chloroaromatic Congeners on a Commercial V2O5-WO3/TiO2 Catalyst: the Effect of Heavy Metal Pb

Comparative Analyses of Catalytic Degradation of PCDD/Fs in the Laboratory Vs. Industrial Conditions

Comparative analyses of catalytic degradation of PCDD/Fs in the laboratory vs. industrial conditions.

Deactivation Effect of Elemental Mercury Oxidation over a V2O5-WO3/TiO2 Catalyst by Pb in Simulated Coal-Fired Flue Gas

Synergistic poisoning of KCl and PbCl2 on commercial V2O5-MoO3/TiO2 catalysts for MSW incineration flue gas denitrification

The Impact of Hydrochloric Acid on the Catalytic Destruction Behavior of 1,2-Dichlorbenzene and PCDD/Fs in the Presence of VWTi Catalysts

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

A Tale of Two Pollutants: the Mutual Promotion Mechanism of Synergistic Catalytic Elimination of Hg0 and Chlorobenzene on V2O5–WO3/TiO2 Catalyst

V2O5-WO3/TiO2 Catalyst for Efficient Synergistic Control of NOx and Chlorinated Organics: Insights into the Arsenic Effect

Catalytic oxidation of PCDD/F on a V2O5-WO3/TiO2 catalyst: Effect of chlorinated benzenes and chlorinated phenols.

Catalytic Oxidation of PCDD/F on a V2O5-WO3/TiO2 Catalyst: Effect of Chlorinated Benzenes and Chlorinated Phenols

Catalytic decomposition of PCDD/Fs on a V 2 O 5 -WO 3 /nano-TiO 2 catalyst: effect of NaCl

Inhibition effects of Pb species on the V2O5-MoO3/TiO2 catalyst for selective catalytic reduction of NO with NH3: A DFT supported experimental study

Deactivation Mechanism of Multipoisons in Cement Furnace Flue Gas on Selective Catalytic Reduction Catalysts

Industrial Chlorinated Organic Removal with Elimination of Secondary Pollution: A Perspective

Substantially enhanced anti-lead poisoning performance on the CeO2-WO3 pairs supported by red mud: Sacrificial effect of Fe2O3

Study on the Decomposition of Trace Benzene over V2O5–WO3/TiO2-based Catalysts in Simulated Flue Gas

Substantially enhanced anti-lead poisoning performance on the CeO<sub>2</sub>-WO<sub>3</sub> pairs supported by red mud: Sacrificial effect of Fe<sub>2</sub>O<sub>3</sub>

Elimination of PCDD/Fs over Commercial Honeycomb-Like Catalyst of V<sub>2</sub>O<sub>5</sub>-MoO<sub>3</sub>/TiO<sub>2</sub> at Low Temperature: From Laboratory Experiments to Field Study

Synergistic Elimination of NOx and Chloroaromatics on a Commercial V2O5-WO3/TiO2 Catalyst: Byproduct Analyses and the SO2 Effect

Unveiling the secondary pollution in the catalytic elimination of chlorinated organics: The formation of dioxins