Abstract:TomoSAR improves the information dimension of radar image from 2D to 3D, and is widely used in elevation modeling, deformation inversion of infrastructure such as high-rise buildings, dams and mining areas, and forest vegetation biomass estimation. However, the revisiting time of traditional spaceborne TomoSAR is more than 10 days, it is difficult to monitor and forecast the sudden deformation in real time. Furthermore, most of the low-orbit satellites are deployed in the north-south direction, so the deformation measurement accuracy in the north-south direction is relatively poor. The orbit baselines in height direction of low orbit satellites are small, so the image quantity and cost of high resolution tomography processing are huge. Therefore, low orbit TomoSAR is difficult to achieve high frequency, high precision and low-cost three-dimensional deformation measurement. Although GEO SAR and MEO SAR systems have the advantages of shorter revisit period, longer observation time and larger beam coverage area theoretically, there are no satellites in orbit at present. GNSS-TomoSAR, based on the reflected signals of navigation satellites, uses the in-orbit navigation satellite as the irradiation source, and a stationary receiver is placed on the ground to receive the echo signal reflected from the scene for synthetic aperture radar tomographic processing, which can achieve high frequency, high precision and low-cost three-dimensional deformation monitoring of the scene. GNSS-TomoSAR is a relatively novel signal processing concept, which is rarely studied at home and abroad. In this paper, the signal processing model of GNSS-TomoSAR is established, the performance boundary of GNSS-TomoSAR is discussed, and the actual track of Beidou IGSO satellite is used to conduct the simulation of height inversion of point target in GNSS-TomoSAR configuration. In above, the application prospect of GNSS-TomoSAR technology is preliminarily explored, lying a foundation for GNSS-TomoSAR real data processing.

An Extended D-Tomosar System For The Retrieval Of Three-Dimensional Surface Deformation

Retrieval of Three-Dimensional Surface Deformation Using an Improved Differential SAR Tomography System

Extension of D-TomoSAR for Multi-Dimensional Reconstruction Based on Polynomial Phase Signal

Seasonal Deformation and Accelerated Motion of Infrastructure Monitoring Using a Generalized Differential SAR Tomography

Multi-dimensional Reconstruction Based on Polynomial Phase Signal with BiSAR Data

TomoSAR Sparse 3-D Imaging Via DEM-Aided Surface Projection.

Differential Tropospheric Tomography Using Spaceborne Simultaneous Multi-angle D-InSAR: Method, Optimization, and Performance Analysis

Three Dimensional Surface Reconstruction with Multistatic SAR.

Modeling and Performance Evaluation of TomoSAR System Based on Reflected Signal of Beidou Navigation Satellite

Sar Tomographic Imaging Demonstration Using Gf-3 Data

Enhanced TomoSAR imaging method with complex least squares for 3D building reconstruction

High-Resolution Sar Tomography via Segmented Dechirping

Three-Dimensional Deformation Retrieval by Multi-Angle Processing in Distributed Geosynchronous SAR

Three-Dimensional Reconstruction of Man-Made Objects Using Polarimetric Tomographic SAR

Multi-Baseline Synthetic Aperture Radar 3-D Imaging via the Same Spatial Surface Projection

Research on 4-D Imaging of Holographic SAR Differential Tomography

System Concepts and Potential Applications of a Tri-Beam Spaceborne SAR Mission

Multi-static MIMO-SAR Three Dimensional Deformation Measurement System

GNSS-Based SAR Interferometry for 3-D Deformation Retrieval: Algorithms and Feasibility Study

Sparse Reconstruction-Based SAR Tomography and It's Application

P-Band UAV-SAR 4D Imaging: A Multi-Master Differential SAR Tomography Approach