RuO2 Nanorods on Electrospun Carbon Nanofibers for Supercapacitors

Bo-Hye Kim,Sohyun Jeon,M. Kim,J. Jeong,Hak Ki Yu,Hyomin Yoo

DOI: https://doi.org/10.1021/acsanm.0c00579

2020-04-01

Abstract:RuO2 nanorods on electrospun carbon nanofibers were simply grown by precipitation and recrystallization methods for studying their capacitive behaviors for supercapacitor applications. Recrystalliz...

Materials Science,Engineering,Chemistry

What problem does this paper attempt to address?

Supercapacitors based on electrospun metal oxide nanofibers

Di Tian,Ce Wang,Xiaofeng Lu

DOI: https://doi.org/10.1016/b978-0-12-820629-4.00012-6

2022-01-01

Abstract:In recent years the research on electrospun nanofibers (NFs) has captured considerable attention, owing to their high specific areas, unique electron and mass transfer capability, strong plasticity, and easy preparation. A large variety of metal oxides, including ruthenium (Ru), manganese (Mn), vanadium (V), nickel (Ni), cobalt (Co), iron (Fe), zinc (Zn), copper (Cu), titanium, and (Ti) oxides, in terms of NFs, porous NFs, hollow NFs, tubular NFs, and core-sheath NFs, have been fabricated via electrospinning and posttreatment methods, which have been broadly applied as electrode materials for high-performance supercapacitors. In this chapter we will highlight the development of the electrospun metal oxides and their composite NFs for supercapacitor electrodes. The synthetic strategies for these materials and the influence of the compositions and architectures on the electrocatalytic performance are discussed. In addition, the symmetrical or asymmetrical supercapacitors are highlighted to reveal their exciting promise.
Preparation and Electrochemical Capacitance of RuO2/TiO2 Nanotubes Composites

YG Wang,XG Zhang

DOI: https://doi.org/10.1016/j.electacta.2003.12.023

IF: 6.6

2004-01-01

Electrochimica Acta

Abstract:In this paper, RuO2/TiO2 nanotubes composites were synthesized by loading various amounts of RuO2 on TiO2 nanotubes. The symmetric supercapacitors based on these nanocomposites were fabricated by using gel polymer PVA–H3PO4–H2O as electrolyte. The electrochemical capacitance performance of the nanocomposites in these supercapacitors was investigated by current–potential responses, galvanostatic charge–discharge tests and electrochemical impedance spectroscopy. The results show that the three dimensional nanotube network of TiO2 offers a solid support structure for active materials RuO2, allows the active material to be readily accessible (available) for electrochemical reactions, and improves the efficiency of the active materials. A maximum specific capacitance of 1263F/g was obtained for the RuO2 which was loading on TiO2 nanotubes.
Activation Mechanism Study of Dandelion-Like Co9s8 Nanotubes in Supercapacitors

Jingwen Yu,Houzhao Wan,Jianjun Jiang,Yunjun Ruan,Ling Miao,Li Zhang,Dandan Xia,Kui Xu

DOI: https://doi.org/10.1149/2.053406jes

IF: 3.9

2014-01-01

Journal of The Electrochemical Society

Abstract:Dandelion-like Co9S8 nanotubes have been fabricated by a mild two-step hydrothermal method and applied as electrode materials in supercapcitors. An unusual activation process of the as-prepared electrode is revealed through electrochemical characterizations and morphology transmutations. During the initial charge-discharge process, CO9 S8OH nanosheets are formed and accumulated on the Co9S8 nanotubes, which largely enhance the contact surface area between electrode and electrolyte and result in an improvement of specific capacitance. After activation of electrodes, the specific capacitance can be dramatically increased by 9.2% from 261.3 F g(-1) to 285.3 F g(-1) at current density of 2 A g(-1), and that is favorable to the performance of supercapacitors. The stability of the as-prepared electrodes are also studied, high coulombic efficiency of 97% and cycle life of 90.4% are also observed after 1000 cycles. All the characters performed by the as-prepared CO9 S-8 nanotubes exhibit its potential as an electrode material for supercapacitors. (C) 2014 The Electrochemical Society.
Electrochemical Behavior Of Amorphous Hydrous Ruthenium Oxide/Active Carbon Composite Electrodes For Super-Capacitor

Jr Zhang,B Chen,Wk Li,Jj Zhu,Lp Jiang

DOI: https://doi.org/10.1142/S0217979202015650

2002-01-01

International Journal of Modern Physics B

Abstract:The RuO2.xH(2)O /C composites were prepared directly based on a sol-gel process under ultrasonic wave (50Hz). The specific capacitance of pure RuO2.xH(2)O materials obtained by the method reached a value of 760F/g. Physical properties of the material and electrochemical characteristics of electrodes were described.
Synthesis of Ru/carbon nanocomposites by polyol process for electrochemical supercapacitor electrodes

Gui-Yan Yu,Wei-Xiang Chen,Yi-Fan Zheng,Jie Zhao,Xiang Li,Zhu-De Xu

DOI: https://doi.org/10.1016/j.matlet.2006.01.015

IF: 3

2006-01-01

Materials Letters

Abstract:The Ru/C nanocomposites with Ru loadings of 20∼60 wt.% were prepared by the polyol process in the presence of XC-72 carbon. TEM observations indicated that Ru nanoparticles were uniform with the average size of about 3.1∼3.5 nm, and highly dispersed on the carbon surface. After electrochemically oxidization from Ru nanoparticles to the pseudocapacitive oxide–hydroxide form, the specific capacitances of these composites were calculated by cyclic voltammetry. It was found that these composites exhibited much higher specific capacitances in comparison with the XC-72 carbon.
Ultra-Fine Ruthenium Oxide Quantum Dots/Reduced Graphene Oxide Composite as Electrodes for High-Performance Supercapacitors

Jie Zhao,Jianmin Zhang,Hang Yin,Yuling Zhao,Guangxu Xu,Jinshi Yuan,Xiaoyao Mo,Jie Tang,Fengyun Wang

DOI: https://doi.org/10.3390/nano12071210

IF: 5.3

2022-04-04

Nanomaterials

Abstract:This study synthesized ultra-fine nanometer-scaled ruthenium oxide (RuO2) quantum dots (QDs) on reduced graphene oxide (rGO) surface by a facile and rapid microwave-assisted hydrothermal approach. Benefiting from the synergistic effect of RuO2 and rGO, RuO2/rGO nanocomposite electrodes showed ultra-high capacitive performance. The impact of different RuO2 loadings in RuO2/rGO nanocomposite on their electrochemical performance was investigated by various characterizations. The composite RG-2 with 38 wt.% RuO2 loadings exhibited a specific capacitance of 1120 F g−1 at 1 A g−1. In addition, it has an excellent capacity retention rate of 84 % from 1A g−1 to 10 A g−1, and excellent cycling stability of 89% retention after 10,000 cycles, indicating fast ion-involved redox reactions on the nanocomposite surfaces. These results illustrate that RuO2/rGO composites prepared by this facile process can be an ideal candidate electrode for high-performance supercapacitors.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Hydrous–ruthenium–oxide thin film electrodes prepared by cathodic electrodeposition for supercapacitors

Yan-Zhen Zheng,Hai-Yang Ding,Mi-Lin Zhang

DOI: https://doi.org/10.1016/j.tsf.2008.02.022

IF: 2.1

2008-01-01

Thin Solid Films

Abstract:Hydrous ruthenium oxide (RuO2·nH2O) thin film electrodes were fabricated by cathodic electrodeposition on titanium substrates. The surface morphological characteristics of the RuO2·nH2O films were examined by scanning electron microscopy, and their images show the uniform spherical grains with nanometer sizes and porous network structure of the RuO2·nH2O films on Ti substrate. The electrochemical performances of the composite for supercapacitors were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and charge/discharge technique. The RuO2·nH2O films exhibit good capacitive behavior, such as high reversible characteristics, excellent cycle stability, and superior power characteristics. The maximum specific capacitance of the RuO2·nH2O film electrode is 786 F g−1 achieved with deposit mass of 0.17 mg.
Preparation and electrochemical performance of MnO2 nanorods as electrode materials for supercapacitor

Bowen ZHANG,Bo YU,Daoai WANG,Feng ZHOU,Weimin LIU

DOI: https://doi.org/10.14002/j.hxya.2014.05.001

2014-01-01

Abstract:MnO 2 nanorods were successfully synthesized via simple hydrothermal method in the presence of onion carbon as the reducing agent,KMnO 4 as the oxidizing agent,and dilute sul-phuric acid as the solvent.The phase composition,structure and morphology of as-obtained MnO 2 nanorods were characterized by powder X-ray diffraction and transmission electron mi-croscopy.The electrochemical performance of MnO 2 nanorods as electrode materials for super-capacitor was evaluated with a CHI660B electrochemical workstation.Results show that as-ob-tained MnO 2 nanorods consist of pureα-MnO 2 and have a diameter of 5-10 nm and a length of 50-100 nm.As electrode materials for supercapacitor,MnO 2 nanorods exhibit good long-term stability and excellent charging and discharging capacities,showing potential application in su-percapacitor.
Preparation And Electrochemistry Of Hydrous Ruthenium Oxide/Active Carbon Electrode Materials For Supercapacitor

Jr Zhang,Dc Jiang,B Chen,Jj Zhu,Lp Jiang,Hq Fang

DOI: https://doi.org/10.1149/1.1417976

IF: 3.9

2001-01-01

Journal of The Electrochemical Society

Abstract:Amorphous hydrous ruthenium oxide/active carbon (RuO2. xH(2)O/C) powders were prepared by a simple procedure based on the sol-gel process. The precursor was obtained by mixing an aqueous solution of RuCl3 and active carbon powders at pH 7. When annealing the precursor at 150 degreesC for 7-9.5 h, the RuO2. xH(2)O/C powders obtained had the highest specific capacitance. Transmission electron microscopy photographs showed that the RuO2. xH(2)O primary particles were about 10-15 nm diam. They adhered to form large porous secondary particles. A modeling capacitor was made with electrodes comprised of RuO2. xH(2)O/C powder and 30% H2SO4 electrolyte. At 10-20 wt % ruthenium in the electrodes, the specific capacitance remained almost unchanged at 243 F/g, which included both the electric double-layer capacitance associated with the high surface area of active carbon and redox capacitance associated with ruthenium oxide. About 52% of the RuO2 in the RuO2. xH(2)O/C powders was utilized. More than 50% of the capacitance in the electrode with 12.1% ruthenium was due to the formation of the double layer, but for the electrode with 21.1% ruthenium, the capacitance attributed to the double layer dropped to 16.8% of the total capacitance. When the electrodes contained ruthenium from 35 wt % to pure RuO2. xH(2)O, the specific capacitance increased from 350 to 715 F/g. The specific capacitance was proportional to the mass of the ruthenium in the electrodes. This enabled the specific capacitance to be controlled by changing the mass ratio of RuCl3 to active carbon in the preparation. Physical properties of the material and electrochemical characteristics of electrodes are also reported along with the capacitor performance. (C) 2001 The Electrochemical Society.
Design and fabrication of a RuO2 microelectrode-based micro-supercapacitor

Zhou Yang,Wang Xiaofeng

DOI: https://doi.org/10.3772/j.issn.1002-0470.2012.04.016

2012-01-01

Abstract:A RuO 2 micro-supercapacitor with a side-by-side electrode configuration structure was designed and fabricated. It was composed of the micro-structure, the micro-electrode, and the functional RuO 2 film on the electrode. The micro-structure was made by the MEMS technology, while the micro-electrode was made by electroplating the functional RuO 2 film on the surface of the current collector. The electrochemical test results showed that the micro-supercapacitor had the specific capacity of 0.012F·cm -2 and the energy density of 0.006J·cm -2. The performance of the RuO 2-CNT (carbon nanotube) composite functional film was studied. The cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) curves showed that compared with the RuO 2 film, the RuO 2-CNT composite film greatly decreased the internal resistance, and improved the energy-storage density and the charge-CNT discharge quality of the micro-capacitor. Anyway, the micro-capacitor can satisfy the energy requirements of a lot of microsystems for its great stability and discharge power.
RuO2 nanorods decorated CNTs grown carbon cloth as a free standing electrode for supercapacitor and lithium ion batteries

Sumreen Asim,Muhammad Sufyan Javed,Shahid Hussain,Masud Rana,Fozia Iram,Dingding Lv,Muhammad Hashim,Muhammad Saleem,Muhammad Khalid,Riffat Jawaria,Zaka Ullah,Nafisa Gull

DOI: https://doi.org/10.1016/j.electacta.2019.135009

IF: 6.6

2019-12-01

Electrochimica Acta

Abstract:Engineering carbon‐based nanostructures, including synthesis, structural designing, and characterization between carbon and active nanomaterials, possesses enormous potential for enabling exceptional electrochemical characteristics and fundamental breakthroughs. Here, we reported RuO2 nanorods (RuO2-NRs) decorated CNTS grown carbon cloth (CNTS-CC) via simple single step CVD and annealing process, as an excellent combination having advantages of the supercapacitors (SCs) and Li-ion batteries (LIBs). A number of characterizations, including scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction measurements affirm that RuO2-NRs are consistently covering the surface of CNTS-CC. The Brunauere Emmette Teller analysis displays that the fabricated architecture holds a well organized 3D interconnected hierarchically micro-mesoporous network that simultaneously facilitates rapid electron transfer and ion diffusion. Furthermore, the electrochemical performance revealing that the RuO2-CNTS-CC has outstanding Li-ion storage potential, including impressive rate capability, large specific capacity and excellent cyclic stability. For supercapacitor application, it is found that RuO2-CNT-CC holds an admirable specific capacitance that can maintain up to 97% after 10,000 cycles. The compatible and inexpensive preparation strategy presented here can contribute as a dynamic methodology towards the advancement of efficient hybrid devices.

electrochemistry
Facile Solid-State Chemical Synthesis of CoMoO4 Nanorods for High-Performance Supercapacitors

Rui Yu,Xiaoyan Lu,Zhenjiang Lu,Yali Cao

DOI: https://doi.org/10.3390/molecules29061369

IF: 4.6

2024-03-20

Molecules

Abstract:The development of electrode materials with excellent performance serves as the key for researchers to enhance the energy density of supercapacitors. Cobalt molybdate (CoMoO4) nanomaterials have been regarded as one of the most prospective electrode materials for supercapacitors due to their high theoretical capacitance and excellent electrical conductivity. In this paper, three kinds of CoMoO4 nanorods were prepared directly via simple and environmentally friendly solid-phase chemical reactions with solid inorganic salts as raw materials. According to X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) test results, different reagents had certain effects on the size and morphology of CoMoO4, and these affected its electrochemical performance. In particular, the samples prepared with Co(NO3)2·6H2O as raw material took on a more uniform micromorphology, with a better crystallinity. Simultaneously, electrochemical test results showed that the samples synthesized with Co(NO3)2·6H2O presented relatively good electrical conductivity and a large specific capacitance (177 F g−1). This may be due to the nitrates reacting more slowly during the reaction and the crystals having difficulty aggregating during growth. Therefore, the structure of the prepared CoMoO4 nanomaterial was more uniform, and it was resistant to collapse during the charging and discharging process; thus, the capacitor presents the best performance.

chemistry, multidisciplinary,biochemistry & molecular biology
Carbon Nanotube Capacitor Materials Loaded with Different Amounts of Ruthenium Oxide

XF Wang,DZ Wang,D Liang

DOI: https://doi.org/10.3866/pku.whxb20030606

2003-01-01

Abstract:Ruthenium oxide-carbon nanotubes composites with different loadings of RuO2 on carbon nanotubes have been synthesized. In order to design nanotube-based ruthenium oxide coated supercapacitor electrodes with large surface area, a new sol-gel process for the preparation of ultrafine RuO2 particles was developed. The composite electrodes consisting of carbon nanotube and RuO2 . xH(2)O were developed by the deposition of RuO2 on the surface of carbon nanotube. Maximum capacitance was observed after heat treatment at 250degreesC for all the composites. Supercapacitors based on the composite electrodes show much higher specific capacitance than those based on pure carbon nanotube ones. A specific capacitance of 570 F . g(-1) can be achieved when the weight percent, of RuO2 . xH(2)O in the composite electrodes reaches 100%. In addition, supercapacitors based on the composite electrodes show both high energy density and high power density characteristics.
Facile synthesis and modification of Fe 2 O 3 nanorod arrays on carbon paper as efficient negative electrodes for supercapacitors

Zhiting Song,Kai Shu,Hongming Hu,Xiaohan Wu,Xiao Tang,Xianju Zhou,Yanhong Li,Yunhuai Zhang

DOI: https://doi.org/10.1016/j.jallcom.2024.173578

IF: 6.2

2024-01-25

Journal of Alloys and Compounds

Abstract:In this research, Fe 2 O 3 nanorod arrays grown on carbon fiber paper were studied, and carbon-coated Fe 2 O 3 (Fe 2 O 3 @C) and sulfurized Fe 2 O 3 @C (Fe 2 O 3 @C-S) were fabricated by carbon coating and sulfurization processes. To promote the application of these materials in supercapacitors, their electrochemical properties were systematically investigated. Based on the results, the materials obtained utilized a pseudocapacitive mechanism for energy storage. Specifically, Fe 2 O 3 exhibited a moderate specific capacitance and extraordinary cycling stability, and no degradation was observed after 10,000 cycles. Impressively, sulfurization greatly enhanced the rate capability and specific capacitance of the sample. As a result, Fe 2 O 3 @C-S attained a specific capacitance of 976.4 mF cm –2 at 4 mA cm –2 and a robust rate capability of 97.30% at 20 mA cm –2 , outperforming Fe 2 O 3 @C (84.39%) and Fe 2 O 3 (70.55%) and demonstrating good cycling stability (92.9%). Notably, Fe 2 O 3 @C-S was active as a positive electrode material; thus, a symmetric supercapacitor was assembled, which yielded a volumetric energy density of 1.46 mWh cm –3 at 16.71 mW cm –3 and maintained an energy density of 0.91 mWh cm –3 even at 145.63 mW cm –3 . Moreover, the device exhibited good cycling stability with a capacity retention of 88.3% after 10,000 cycles at 10 mA cm –2 . The integration of Fe 2 O 3 nanorod arrays on conductive substrates, coupled with the above modifications, strongly promoted the material's energy storage performance. Our study emphasized the significant potential of Fe 2 O 3 @C-S as an efficient electrode material for supercapacitors.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Preparation and electrochemical performances of α-MnO2 nanorod for supercapacitor

Yang Li,Huaqing Xie,Jifeng Wang,Lifei Chen

DOI: https://doi.org/10.1016/j.matlet.2010.10.048

IF: 3

2011-01-01

Materials Letters

Abstract:α-MnO2 nanorod was prepared by chemical precipitation with surfactant as the structure-directing agent and subsequent heat treatment at 800°C. The morphology and structure of the prepared α-MnO2 were investigated by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). It was revealed that the α-MnO2 nanorod was successfully synthesized without impurities and the diameter of the nanorod was less than 50nm. In cyclic voltammetry and galvanostatical discharge–charge test, the α-MnO2 nanorod showed regular capacitive behaviors and good cycling stabilities and delivered a maximum capacitance of 166.2F/g, which indicated that the α-MnO2 nanorod was a potential good electrode material for supercapacitor application.

materials science, multidisciplinary,physics, applied
Synthesis of hydrous RuO2 anchored on seaweed-derived porous carbon for high-performance electrochemical capacitors

Mingming Li,Yan Fang,Jinghan Li,Boya Sun,Jie Du,Qinglei Liu,Di Zhang

DOI: https://doi.org/10.1016/j.matlet.2022.132182

IF: 3

2022-07-01

Materials Letters

Abstract:Supercapacitors (SCs) have attracted widespread attention due to the fast development of electronics and electrical vehicles. As a potential pseudocapacitive electrode material for SCs, RuO2 is promising for fast energy storage, but its performance is severely restricted by the spontaneous agglomeration and high cost. Here, we prepared seaweed-derived porous carbon (SDC) as a conductive substrate of hydrous RuO2 nanoparticles for electrochemical SCs, and the as-prepared hybrid exhibits high specific capacitance of 807 F g−1 at 2 mV s−1, excellent high-rate (988.1 F g−1 at 0.1 A g−1 and 635.9 F g−1 at 5 A g−1) and cycling performances (93.8% retention after 1000 cycles at 1 A g−1) in 1 M H2SO4. The outstanding performance of the hybrid can be attributed to the interconnected three-dimensional mesoporous structure of the SDC and the uniform dispersion of hydrous RuO2 nanoparticles. This work demonstrates that the hierarchical porous SDC can be used as an excellent conductive substrate to further enhance the electrochemical performance of other easily agglomerated nanoparticles.

materials science, multidisciplinary,physics, applied
Nano ruthenium oxide/carbon nanotubes composite electrode material for electrochemical capacitors

Xiaofeng Wang,Qi Gao,Ji Liang

DOI: https://doi.org/10.3321/j.issn:1002-185x.2006.02.029

2006-01-01

Rare Metal Materials and Engineering

Abstract:The ruthenium oxide has been formed by a sol-gel process. The active electrode materials was obtained by mixing aqueous solution of RuCl(3)(.)xH(2)O and NaHCO3. The crystalline structure and the electrochemical properties of the powder have been studied as a function of the annealing temperature. At lower annealing temperatures, the powder is in an amorphous phase with a lower active surface area and poor electrochemical capacitance. The fine hydrous ruthenium oxide powder with satisfactory electrochemical characteristic was obtained by annealing the powder at 210 degrees C. The active surface area of the material is improved and the capacitance is calculated to be 540 F(.)g(-1). The composite with the carbon nanotubes as support was prepared. The capacitance of composite with 20wt% CNTs is calculated to be 860 F(.)g(-1). It is also found that the addition of carbon nanotubes in ruthenium oxide could improve the power characteristics of supercapacitors.
Development of Supercapacitors Based on Carbon Nanotubes

Ma Renzhi,Wei Bingqing,Xu Cailu,Liang Ji,Wu Dehai

DOI: https://doi.org/10.1007/bf02916888

2000-01-01

Science China Technological Sciences

Abstract:Block-type electrodes made of carbon nanotubes were fabricated by different processes. The volumetric specific capacitance based on such electrodes reached 107 F/cm 3 , which proves carbon nanotubes to be ideal candidate materials for supercapacitors. The composite electrodes consisting of carbon nanotubes and RuO 2 · x H 2 O were developed by the deposition of RuO 2 on the surface of carbon nanotubes. Supercapacitors based on the composite electrodes show much higher specific capacitance than those based on pure carbon nanotube ones. A specific capacitance of 600 F/g can be achieved when the weight percent of RuO 2 · x H 2 O in the composite electrodes reaches 75%. In addition, supercapacitors based on the composite electrodes show both high energy density and high power density characteristics.
Preparation of mulberry-like RuO2 electrode material for supercapacitors

Feng Yu,Le Pang,Hong-Xia Wang

DOI: https://doi.org/10.1007/s12598-020-01561-8

IF: 6.318

2020-09-07

Rare Metals

Abstract:As a newly emerging excellent energy storage device, supercapacitors have been widely studied due to their unique advantages. Electrode material is one of the key components that determine the performance of a supercapacitor. Among the various electrode materials of supercapacitors, RuO2 has attracted great attention in the scientific community due to its high theoretical energy storage capability and excellent stability. However, most RuO2 materials suffer the problem of low specific surface area, causing a much lower actual capacitance value compared to the theoretical performance of the material. In this work, a mulberry-like RuO2 electrode material with large specific surface area (159.4 m2·g−1) was successfully synthesized by a facial hydrothermal method. The electrochemical characterization has shown that the RuO2 possesses a high specific capacitance of 400 F·g−1 at a current density of 0.2 A·g−1 and good capacitance retention rate of 84.7% after 6000 charge/discharge cycles under a current density of 10 A·g−1. The energy densities and power densities of the RuO2-AC supercapacitor vary from 25.0 to 11.7 Wh·kg−1 and 160 to 10,560 W·kg−1 at current density ranging from 0.2 to 10.0 A·g−1, respectively.<h3 class="a-plus-plus">Graphic abstract</h3>

materials science, multidisciplinary,metallurgy & metallurgical engineering
Activated Carbon Based Ruthenium Oxide Materials For Supercapacitor

Xf Wang,Dz Wang,J Liang

DOI: https://doi.org/10.3321/j.issn:1002-185X.2003.06.006

2003-01-01

Abstract:A ruthenium oxide coated activated carbon (RuO2/C) was synthesized as a new electrode material for aqueous-electrolyte super-capacitor. Some laboratory-scale prototype capacitors were fabricated with the RuO2/actived-carbon electrode material and tested in term of capacitance and high power discharge for their electrochemical performance. these composite super-capacitors exhibited a satisfactory performance, such as the rated capacitance higher than 350 F/g, compared with that of single electrode material only.

RuO2 Nanorods on Electrospun Carbon Nanofibers for Supercapacitors

Supercapacitors based on electrospun metal oxide nanofibers

Preparation and Electrochemical Capacitance of RuO2/TiO2 Nanotubes Composites

Activation Mechanism Study of Dandelion-Like Co9s8 Nanotubes in Supercapacitors

Electrochemical Behavior Of Amorphous Hydrous Ruthenium Oxide/Active Carbon Composite Electrodes For Super-Capacitor

Synthesis of Ru/carbon nanocomposites by polyol process for electrochemical supercapacitor electrodes

Ultra-Fine Ruthenium Oxide Quantum Dots/Reduced Graphene Oxide Composite as Electrodes for High-Performance Supercapacitors

Hydrous–ruthenium–oxide thin film electrodes prepared by cathodic electrodeposition for supercapacitors

Preparation and electrochemical performance of MnO2 nanorods as electrode materials for supercapacitor

Preparation And Electrochemistry Of Hydrous Ruthenium Oxide/Active Carbon Electrode Materials For Supercapacitor

Design and fabrication of a RuO2 microelectrode-based micro-supercapacitor

RuO2 nanorods decorated CNTs grown carbon cloth as a free standing electrode for supercapacitor and lithium ion batteries

Facile Solid-State Chemical Synthesis of CoMoO4 Nanorods for High-Performance Supercapacitors

Carbon Nanotube Capacitor Materials Loaded with Different Amounts of Ruthenium Oxide

Facile synthesis and modification of Fe 2 O 3 nanorod arrays on carbon paper as efficient negative electrodes for supercapacitors

Preparation and electrochemical performances of α-MnO2 nanorod for supercapacitor

Synthesis of hydrous RuO2 anchored on seaweed-derived porous carbon for high-performance electrochemical capacitors

Nano ruthenium oxide/carbon nanotubes composite electrode material for electrochemical capacitors

Development of Supercapacitors Based on Carbon Nanotubes

Preparation of mulberry-like RuO2 electrode material for supercapacitors

Activated Carbon Based Ruthenium Oxide Materials For Supercapacitor