Abstract:The O-3-type layered Na(NixFeyMnz)O-2 (0 < x, y, z < 1) cathode materials have attracted great interest in sodium ion batteries due to the abundance and cost of raw materials and their high specific capacities. However, the cycling stability and rate capability at high voltages (> 4.0 V) of these materials remain an issue. In this work, we successfully synthesized a Li-substituted layered-tunneled (O3-spinel) intergrowth cathode (LS-NFM) to address these issues. The remarkable structural compatibility and connectivity of the two phases were confirmed by X-ray diffraction (XRD), selected area electron diffraction (SAED), and high-resolution transmission electron microscopy (HRTEM). The LS-NFM electrode reached a discharge capacity of 96 mAh g(-1) with a capacity retention of 86% after 100 cycles at a current rate of 100 mA g(-1) in a voltage window of 2.0-4.2 V. Moreover, the LS-NFM cathode exhibited an enhanced rate capability in comparison to the undoped single phased layered cathode (NFM). The enhanced rate capability of LS-NFM can be explained by the significantly increased effective Na+ diffusivity measured by the galvanostatic intermittent titration technique (GITT) compared to the undoped control NFM cathode, which can be ascribed to the improved charge transport kinetics through shortened diffusion path by direct connection between the 3D channels in the spinel phase and 2D channels in the layered phase. The results from ex situ hard/soft X-ray adsorption spectroscopy (XAS) suggest that the capacity of the LS-NFM cathode is mainly associated with the Ni2+/Ni4+ redox couple and slightly from the Fe3+/Fe4+ redox couple. The voltage profile of the LS-NFM cathode exhibits a reversible plateau above 4.0 V, indicating great stability at high voltages and structural stabilization by the spinel phase. In addition to the substitution of various transition metals, or the modification of the stoichiometry of each transition metal, this study provides a new strategy to improve electrochemical performance of layered cathode materials for sodium ion batteries.

Deciphering an Abnormal Layered‐Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Solid-State Synthesis of Low-Cost and High-Energy-Density Sodium Layered-Tunnel Oxide Cathodes: Dynamic Structural Evolution, Na+/Vacancy Disordering, and Prominent Moisture Stability

Cu2+ Dual-Doped Layer-Tunnel Hybrid Na0.6Mn1- Xcu Xo2 As a Cathode of Sodium-Ion Battery with Enhanced Structure Stability, Electrochemical Property, and Air Stability.

Manipulating Stable Layered P2‐Type Cathode via a Co‐Substitution Strategy for High Performance Sodium Ion Batteries

Large-Scale Synthesis of the Stable Co-Free Layered Oxide Cathode by the Synergetic Contribution of Multielement Chemical Substitution for Practical Sodium-Ion Battery

Cu2+ Dual-Doped Layer-Tunnel Hybrid Na0.6Mn1–xCuxO2 as a Cathode of Sodium-Ion Battery with Enhanced Structure Stability, Electrochemical Property …

Developing an Abnormal High-Na-content P2-type Layered Oxide Cathode with Near-Zero-strain for High-Performance Sodium-Ion Batteries.

Realizing High Capacity and Zero Strain in Layered Oxide Cathodes via Lithium Dual-Site Substitution for Sodium-Ion Batteries

Constructing Layered/tunnel Interlocking Oxide Cathodes for Sodium-Ion Batteries Based on Breaking Mn 3+/mn 4+equilibrium in Na 0.44 MnO2 Via Trace Mo Doping

Developing an Abnormal High-Na-Content P2-Type Layered Oxide Cathode with Near-Zero-Strain for High-Performance Sodium-Ion Battery

A Li-substituted Hydrostable Layered Oxide Cathode Material with Oriented Stacking Nanoplate Structure for High-Performance Sodium-Ion Battery

Constructing Layered/tunnel Interlocking Oxide Cathodes for Sodium-Ion Batteries Based on Breaking Mn3+/Mn4+ Equilibrium in Na0.44MnO2 Via Trace Mo Doping

Structural Insight into the Abnormal Capacity of a Co-Substituted Tunnel-Type Na0.44MnO2 Cathode for Sodium-Ion Batteries

A Layered–Tunnel Intergrowth Structure for High‐Performance Sodium‐Ion Oxide Cathode

Mitigation of Jahn–Teller Distortion and Na+/vacancy Ordering in a Distorted Manganese Oxide Cathode Material by Li Substitution

Engineering sodium-rich manganese oxide with robust tunnel structure for high-performance sodium-ion battery cathode application

Ion Substitution Strategy of Manganese‐Based Layered Oxide Cathodes for Advanced and Low‐Cost Sodium Ion Batteries

High-Entropy Layered Oxide Cathode Materials with Moderated Interlayer Spacing and Enhanced Kinetics for Sodium-Ion Batteries

Ultralow‐Strain Zn‐Substituted Layered Oxide Cathode with Suppressed P2–O2 Transition for Stable Sodium Ion Storage

Formulating High‐Rate and Long‐Cycle Heterostructured Layered Oxide Cathodes by Local Chemistry and Orbital Hybridization Modulation for Sodium‐ion Batteries

Li-Substituted Layered Spinel Cathode Material for Sodium Ion Batteries