Abstract:To study the signal transmission mechanism in the human body, the channel characteristics are generally analyzed by modeling. In current modeling methods, the human body is considered quasi-static and the human tissues isotropic, for simplifying the model and its calculation; however, this does not consider the effect of the human tissues on electric signal transmission, resulting in considerable deviations between the calculated results and the measured values. To reduce model errors and improve precision, a channel modeling method with human muscular-tissue characteristics is proposed in this study. In this method, Maxwell's equations is used as the governing equation and a galvanic-coupling intra-body communication channel model with human-tissue characteristics is built in the cylindrical coordinate system. By building a numerical model with the same parameters as in the analytical model, the analytical solution is proved to be correct. By comparing the different-sample anisotropic models and the isotropic models with the experimental results, it is concluded that the anisotropic model with muscular-tissue characteristics is superior to the isotropic model without muscular-tissue characteristics, with respect to the curve variation tendency and error between the model calculations and the experimental results. The precision of this anisotropic model is enhanced by 200%; hence, it is more accurate. At last, in order to study the optimal communication frequency of the channel, we select 50 healthy persons as the subjects of this experiment, we find that the optimal communication frequency band of the human arm is 10 kHz to 50 kHz. Within this frequency band, the channel gain is the largest, and the mean deviation of samples is less than 2dB, which is very beneficial to signal transmission in human body.

Path Loss Modeling and Verification of Implantable Human-Body Communication Based on a Point Source Field

Study on Signal Transmission Mechanism and Characteristic of Human Body Communication

Analysis of Wave Propagation on Human Body Based on Stratified Media Model

Study on Model and Channel Characteristics of Human Body Communication

Channel Modeling for Physically Secure Electro-Quasistatic In-Body to Out-of-Body Communication with Galvanic Tx and Multimodal Rx

Experimental Verification of Human Body Communication Path Gain Channel Modeling for Muscular-Tissue Characteristics

Communication Channel Analysis and Simulation of Medical Implanted Electronic Devices Based on the Volume Conduction

Implanted Cardiac Pacemaker Mathematical Modeling and Research Based on the Volume Conduction.

Multi-Path Model and Sensitivity Analysis for Galvanic Coupled Intra-Body Communication Through Layered Tissue

An Efficient Simulation Technology for Characterizing the Ultra-Wide Band Signal Propagation in a Wireless Body Area Network

A Human Body Model for Efficient Numerical Characterization of UWB Signal Propagation in Wireless Body Area Networks

Model and Channel Characteristics of Near Field Inter-Body Coupling Communication

2GHz near-field in-head path-loss model for stroke detection

Modeling and characterization of the implant intra-body communication based on capacitive coupling using a transfer function method.

Signal transmission analysis in implantable human body communication for abdominal medical devices

Stimulation of microelectrode to deep brain regions: Simulation analysis using ANSYS software

Dynamic Channel Modeling and Characteristic Analysis of Wearable Human Body Communication System

Development Of A Non-Invasive Deep Brain Stimulator With Precise Positioning And Real-Time Monitoring Of Bioimpedance

Mathematical Simulation of the Implant Capacitive Coupling Intra-Body Communication Based on Transfer Function Method

Experimental Channel Characterization of Human Body Communication Based on Measured Impulse Response

Channel Loss in Contactless Human Body Communication