Abstract:The strength of industrial carbon fibers (CFs) is far lower than their theoretical strength because of defects in the microstructure of carbon fibers and these are the main restrictions in improving their performance. The most effective way to improve the strength of CFs is to reduce the amount of these defects. We thus report a novel method using a liquid oligomer of acrylonitrile (LAN) to modify the defects. Briefly, Polyacrylonitrile (PAN)-based CFs T300 were infused into LAN, and subsequently oxidized in air and carbonized in nitrogen. Their tensile strength increased by 25%. Two-dimensional small angle X-ray scattering (SA)(S) was used to characterize the variation in length of the microvoids (L), the chord length of cross section 4 the orientation angle (Beg), and the relative volume (V-rel). The results show that the length, orientation, angle and relative volume of the microvoids were much lower and the tensile property improved. The improvement in the tensile property comes from the modification of defects in CFs T300 by LAN. The BET method and scanning electron microscopy (SEM) were used to characterize the specific surface area and the morphology of T300 before and after LAN treatment. The results show that after the treatment of LAN the specific surface area decreased and the amount of surface defects also decreased. We further prove that the liquid oligomer of acrylonitrile can modify the defects in CFs. X-ray photoelectron spectroscopy (XPS) was used to study the chemical composition of LAN-treated CF surfaces. The results show that the relative content of oxygen-containing functional groups on the surface of the CFs (C OH, C=O, HO-C=O) increased significantly. The increase in oxygen-containing groups enhanced the surface polarity of the CFs, improving the interaction between the treated CFs and the epoxy resin, which acts as a carbon fiber substrate. Therefore, the mechanical properties of the CFs improved.

Modulus Distribution in Polyacrylonitrile-Based Carbon Fiber Monofilaments

Tensile Performance of Polymer Nanocomposites with Randomly Dispersed Carbon Nanothreads

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Study of Structure–mechanical Heterogeneity of Polyacrylonitrile-Based Carbon Fiber Monofilament by Plasma Etching-Assisted Radius Profiling

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

The Effect of Nanostructure on the Tensile Modulus of Carbon Fibers

Tensile strength prediction of unidirectional polyacrylonitrile (PAN)-based carbon fiber reinforced plastic composites considering stress distribution around fiber break points

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

Structural Features of Polyacrylonitrile-Based Carbon Fibers

An Analytical Model for the Uniaxial Tensile Modulus of Plain-Woven Fabric Composites and Its Application and Experimental Validation

Micromechanics analysis of high modulus carbon fibers

The Properties of Dry-Spun Carbon Nanotube Fibers and Their Interfacial Shear Strength in an Epoxy Composite

Characterization and prediction of tensile properties of carbon fiber-reinforced thermoplastics composed of hybrid short carbon fiber/PA6 fiber nonwoven mats

Molecular Modeling of the Microstructure Evolution during the Carbonization of PAN-Based Carbon Fibers

Modification of Microvoid Defects in Polyacrylonitrile-Based Carbon Fibers by A Liquid Oligomer of Acrylonitrile

Advances in insight of radial heterogeneous microstructure and its relevance to mechanical properties of PAN‐based carbon fibers

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

A comparative analysis of polyacrylonitrile-based carbon fibers: (II) Relationship between the microstructures and properties

Transverse tensile properties of laminar unidirectional carbon fiber‐reinforced polymers enhanced with multiscale fiber‐interleaving: Experiments and modeling

The Relationship Between the Mechanical Properties and Microstructures of Carbon Fibers

Carbon Nanotube Fibers: Monitoring a Micromechanical Process in Macroscale Carbon Nanotube Films and Fibers (adv. Mater. 5/2009)