Abstract:Red mud is a waste generated from the aluminum industry in large quantities. The potential of red mud as a sorbent for beneficial reuse has been the focus of research efforts. However, the limited sorption capacity of red mud has hindered its applications in the removal of environmental pollutants. In this study, the feasibility of heat treatment in improving the sorption of toxic Cd(II) by red mud was investigated in the temperature range of 200-900 °C. Heat treatment at 500 °C resulted in the highest sorption capacity (42.64 mg g-1) and the fastest sorption rate. Further analyses revealed that heat treatment at 500 °C led to significant increases in specific surface area (32.77 m2 g-1), which likely contributed to the enhanced Cd(II) sorption performance. Notably, heat treatment at 500 °C nearly doubled Cd(II) sorption stability as compared with that of raw red mud, as demonstrated by leaching experiments with simulated rainwater. Sequential extraction and XPS analyses indicated that specific sorption was the predominant mechanism involved in Cd(II) removal by red mud heat-treated at 500 °C (RM500). The strength of specific sorption following heat treatment likely contributed to the increase in sorption stability due to the formation of inner-sphere complex (-OCdOH). Metal-metal ion exchange was identified as another sorption mechanism, which, however, likely had only a limited effect on Cd(II) sorption performance. As the final pH (6.57) of the sorption system was typically lower than the pHPZC (about 10.6) of RM500, positive charges would develop on the red mud surface and impede the retention of Cd(II) cations, resulting in weak electrostatic attraction between Cd(II) cations and red mud. In summary, heat treatment at 500 °C considerably enhanced the capacity, rate and stability of Cd(II) sorption by red mud, suggesting red mud could be optimized by heat treatment as a more effective sorbent for Cd(II) removal. These findings represent the first mechanistic characterization of Cd(II) sorption by heat-treated red mud, providing much needed insights into the potential strategies to enhance the effectiveness of red mud in the sorptive removal of toxic heavy metals.

Novel red mud/poly‐acrylic composites synthesized from red mud and its performance on cadmium removal from aqueous solution

Synthesis, Characterization and Adsorption of Pb(Ⅱ), Cd(Ⅱ) and Cu(Ⅱ) by Red Mud/polyacrylic Acid/sodium Carboxymethyl Cellulose Hydrogel

A comprehensive investigation of the adsorption behaviour and mechanism of industrial waste sintering and bayer red muds for heavy metals

Lanthanum-Modified Phosphogypsum Red Mud Composite for the Co-Adsorption of Cadmium and Arsenic: Mechanism Study and Soil Remediation

Characterization of phosphate modified red mud–based composite materials and study on heavy metal adsorption

Novel adsorbent synthesized from red mud and acid mine drainage for enhanced contaminant removal: Industrial waste transformation, adsorbent performance and metal(loid) removal mechanisms

Biomass-derived carbon/iron composite (FexOy-BC (RM)) with excellent Cd(II) adsorption from wastewater – Red mud resource utilization

Preparation of a Novel MnO2/red Mud Composites to Enhance Arsenic Removal

Purification of acidic wastewater containing Cd(II) using a red mud–loess mixture: Column test, breakthrough curve, and speciation of Cd

A Novel Red Mud Adsorbent for Phosphorus and Diclofenac Removal from Wastewater

Taloring sawdust derived hydrochar via red mud for cadmium removal: Electron transfer insight and recyclability assessment

Iron-rich red mud and iron oxide-modified biochars: A comparative study on the removal of Cd(II) and influence of natural aging processes

Adsorption of Pb, Cu and Cd from Water on Coal Fly Ash-Red Mud Modified Composite Material: Characterization and Mechanism

Effects of Red Mud on Rheological, Crystalline, and Mechanical Properties of Red Mud/pbat Composites

Enhancing Cd(II) sorption by red mud with heat treatment: Performance and mechanisms of sorption

Effective Adsorption Performance and Mechanism of Methylene Blue from Dye Wastewater by Humic Acid Sucrose-Modified Red Mud

Characteristics of Cadmium Sorption by Heat-Activated Red Mud in Aqueous Solution

Ear-like Poly (acrylic Acid)-Activated Carbon Nanocomposite: A Highly Efficient Adsorbent for Removal of Cd(II) from Aqueous Solutions.

A Novel Heat-Treated Humic Acid/mgal-Layered Double Hydroxide Composite for Efficient Removal of Cadmium: Fabrication, Performance and Mechanisms

Adsorption of Aquatic Cd(2+)using a Combination of Bacteria and Modified Carbon Fiber

Research Enhancing Acidic Mine Wastewater Purification: Innovations in Red Mud–Loess