Abstract:Past research has shown that advancing diesel injection timing is a promising approach to decrease the unburned methane and greenhouse gas (GHG) emissions of natural gas/diesel dual-fuel engines at lower engine loads. However, this benefit may not persist under medium to high load-low speed conditions. To explore this, the present paper uses experiments and detailed computational fluid dynamic (CFD) modeling to investigate the impacts of diesel injection timing on the combustion and emissions performance of a heavy-duty natural gas/diesel dual-fuel engine under four different engine load-speed conditions. The results showed that advancing diesel injection timing increases the peak pressure, thermal efficiency, and NOx emissions for all examined engine load-speed conditions. Advancing diesel injection timing also significantly decreases the unburned methane and CO2-equivalent (GHG) emissions of the dual-fuel engine under low load-low speed and medium load-high speed conditions. The concentration of OH and CH4 revealed that the central part of the combustion chamber is the main source of the unburned methane emissions under low load-low speed and medium load-high speed conditions, and advancing diesel injection timing significantly improves the combustion of natural gas-air mixture in this region. However, advancing diesel injection timing slightly increases the unburned methane emissions trapped in the crevice volume. However, this slight increase in the unburned methane emissions in the crevice volume is much lower than its significant decrease in the central region of the combustion chamber. At medium to high load-low speed conditions, there is almost no unburned methane in the central part of the combustion chamber, and the crevice region is considered as the main source of unburned methane emissions. As a result, advancing diesel injection timing does not improve the combustion of natural gas-air mixture in the central part of the combustion chamber but slightly increases the unburned methane trapped in the crevice region. This is the main reason that advancing diesel injection timing slightly increases the unburned methane emissions under medium to high load-low speed conditions. Overall, advancing diesel injection timing significantly increases thermal efficiency and decreases the unburned methane and GHG emissions under low load-low speed and medium load-high speed conditions. It improves the thermal efficiency under medium to high load-low speed conditions, but comes at the expense of increased methane and unchanged GHG emissions.

Micro-GA Optimization Analysis of the Effect of Diesel Injection Strategy on Natural Gas-Diesel Dual-Fuel Combustion

Analysis of Two-Stage Natural-Gas Lean Combustion Inside a Diesel Geometry

Numerical Optimization of Natural Gas and Diesel Dual-Fuel Combustion for a Heavy-Duty Engine Operated at a Medium Load

The effect of ignition diesel injection conditions on the combustion process of natural gas engine

On the optimization of the double-layer combustion chamber with and without EGR of a diesel engine

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Optimization of Combustion Chamber Geometry for Natural Gas Engines with Diesel Micro-Pilot-Induced Ignition

Effect of diesel injection timing on the combustion of natural gas/diesel dual-fuel engine at low-high load and low-high speed conditions

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

The multi-parameter optimization of injections on double-layer diesel engines based on genetic algorithm

Experimental Study of the Effects of Natural Gas Injection Timing on the Combustion Performance and Emissions of A Turbocharged Common Rail Dual-Fuel Engine

Influence of Combustion Chamber on Natural Gas Engine Performance and Optimization

Diesel-natural Gas Dual Fuel Injection Strategy Effects on Engine Ignition Delay and Cylinder Pressure Evolution

Effect of the Diesel Injection Timing and the Pilot Quantity on the Combustion Characteristics and the Fine-Particle Emissions in a Micro-Diesel Pilot-Ignited Natural-Gas Engine

Experimental study on in-cylinder combustion and exhaust emissions characteristics of natural gas/diesel dual-fuel engine with single injection and split injection strategies

Effect of post-injection strategy on greenhouse gas emissions of natural gas/diesel dual-fuel engine at high load conditions

Optimization of a diesel/natural gas dual fuel engine under different diesel substitution ratios

Investigation on combustion characteristics and gas emissions of a high-pressure direct-injection natural gas engine at different combustion modes

A Methodology for Regulating Fuel Stratification and Improving Fuel Economy of GCI Mode Via Double Main-Injection Strategy

Research on the Ignition Strategy of Diesel Direct Injection Combined with Jet Flame on the Combustion Character of Natural Gas in a Dual-Fuel Marine Engine

Experimental investigation on the combustion and emissions in a pilot ignited direct injection natural gas engine using HCDI strategy