Abstract:In order to understand the pyrolysis mechanism, reaction kinetic and product properties of biomass and select suitable agricultural and forestry residues for the generation desired products, the pyrolysis and catalytic pyrolysis characteristics of three main components (hemicellulose, cellulose, and lignin) of biomass were investigated using a thermogravimetric analyzer (TGA) with a fixed-bed reactor. Fourier transform infrared spectroscopy (FTIR) and elemental analysis were used for further characterization. The results showed that: the thermal stability of hemicellulose was the worst, while that of cellulose was higher with a narrow range of pyrolysis temperatures. Lignin decomposed over a wider range of temperatures and generated a higher char yield. After catalytic pyrolysis over HZSM-5 catalyst, the conversion ratio increased. The ratio for the three components was in the following order: lignincellulose < biomass < xylan. The Starink method was introduced to analyze the thermal reaction kinetics, activation energy (Ea), and the pre-exponential factor (A). The addition of HZSM-5 improved the reactivity and decreased the activation energy in the following order: xylan (30.54%) > biomass(15.41%) > lignin (14.75%) > cellulose (6.73%). The pyrolysis of cellulose gave the highest yield of bio-oil rich in levoglucosan and other anhydrosugars with minimal coke formation. Xylan gave a high gas yield and moderate yield of bio-oil rich in furfural, while lignin gave the highest solid residue and produced the lowest yield of bio-oil that was rich in phenolic compounds. After catalytic pyrolysis, xylan gave the highest yield of monocyclic aromatic hydrocarbons, 76.40%, and showed selectivity for benzene and toluene. Cellulose showed higher selectivity for xylene and naphthalene; however, lignin showed enhanced for selectivity of C10 + polycyclic aromatic hydrocarbons. Thus, catalytic pyrolysis method can effectively improve the properties of bio-oil and bio-char.

Identification and Structural Characterization of Oligomers Formed from the Pyrolysis of Biomass

Effects of vapor-/solid-phase interactions among cellulose, hemicellulose and lignin on the formation of heavy components in bio-oil during pyrolysis

Characterization of Pyrolytic Lignins with Different Activities Obtained from Bio-Oil

Comparative study on pyrolysis and catalytic pyrolysis upgrading of biomass model compounds: thermochemical behaviors, kinetics, and aromatic hydrocarbon formation

Unveiling the pyrolysis mechanisms of cellulose: Experimental and theoretical studies

Mechanism study on pyrolysis interaction between cellulose, hemicellulose, and lignin based on photoionization time-of-flight mass spectrometer (PI-TOF-MS) analysis

Cellulose-lignin and Xylan-lignin Interactions on the Formation of Lignin-derived Phenols in Pyrolysis Oil

Stable Oligomer Formation from Lignin by Pyrolysis of Softwood in an Aprotic Solvent with a Hydrogen Donor

Mechanistic and kinetic investigation on maximizing the formation of levoglucosan from cellulose during biomass pyrolysis

Pyrolysis behavior and product distributions of biomass six group components: Starch, cellulose, hemicellulose, lignin, protein and oil

Separation and Characterization of Pyrolytic Lignins from the Heavy Fraction of Bio-Oil by Molecular Distillation

RESEARCH ON BIOMASS PYROLYSIS AND BIO-OIL CHARACTERISTICS

Mechanism Study on the Pyrolysis of a Synthetic Β-O-4 Dimer As Lignin Model Compound

Influence of the Interaction of Components on the Pyrolysis Behavior of Biomass

A New Insight into Pyrolysis Mechanism of Three Typical Actual Biomass: the Influence of Structural Differences on Pyrolysis Process

Thermochemical behaviors, kinetics and bio-oils investigation during co-pyrolysis of biomass components and polyethylene based on simplex-lattice mixture design

Relationships between Biomass Composition and Liquid Products Formed via Pyrolysis

Molecular characterization of organic aerosol particles from biomass pyrolysis

Cellulose Pyrolysis Mechanism Based on Functional Group Evolutions by Two-Dimensional Perturbation Correlation Infrared Spectroscopy

Co-pyrolysis of biomass and polyethylene: Mechanistic insights into functional group transformations on solid matrix

Identifying at molecular scale the pyrolysis heavy components from two lignin monomers