Abstract:All-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted tremendous attentions in the photovoltaic field these days in view of their outstanding stability, especially thermal stability. However, the bromide-rich perovskite, such as CsPbBr3, always suffer from a low phase-purity and poor morphology synthesized by traditional two-step deposition route. Herein, we demonstrate a facile multistep spin-coating strategy to fabricate high-quality CsPbBr3 films on the low-temperature processed compact TiO2 (c-TiO2) electron transport layer (ETL) of the carbon-based PSCs. As-prepared films exhibit more homogeneous with higher CsPbBr3-phase purity and larger average grain sizes up to 1 mu m, compared to those prepared through traditional two-step deposition process. The champion power conversion efficiency (PCE) of the planar CsPbBr3 PSC is boosted from 7.05% to 8.12%, getting an increase by 15.2%, due to the increased crystallinity and light-harvesting ability as well as reduced trap states of the CsPbBr3 film. To further enhance the device performance, a SnO2 thin layer with much higher carrier mobility than TiO2 is introduced to passivate the c-TiO2 ETL. It is found that the SnO2 layer can not only improve the surface morphology of the ETL, but also reduce the current shunting pathways in the c-TiO2. The TiO2/SnO2 bilayered ETL possesses a superior electron extraction capability, beneficial to the charge transport and suppression of the interfacial trap-assisted recombination. The best-performing TiO2/SnO2-based CsPbBr3 PSC delivers an excellent fill factor of 0.817 and a high PCE of 8.79%, which is the highest efficiency for planar CsPbBr3 PSCs reported to date. More importantly, the unencapsulated all-inorganic PSCs show a promising humidity and thermal stability with no decline in efficiency when stored in ambient air at room temperature (25 degrees C) for over 1000 h and 60 degrees C for one month, respectively. Our work pave the ways for practical applications of cost-effective, highly efficient and stable all-inorganic PSCs.

Two-dimensional Black Phosphorous Induced Exciton Dissociation Efficiency Enhancement for High-Performance All-Inorganic CsPbI3 Perovskite Photovoltaics

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Efficient Carbon-Based CsPbBr 3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

Efficient Carbon-Based CsPbBr3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

All-Inorganic CsPbBr3 Perovskite Solar Cells with 10.45% Efficiency by Evaporation-Assisted Deposition and Setting Intermediate Energy Levels

Simulated development and optimized performance of CsPbI<sub>3</sub> based all-inorganic perovskite solar cells

The design and performance optimization of all-inorganic CsPbIBr2/CsSnI3 heterojunction perovskite solar cells

Black phosphorus quantum dots as an effective perovskite interfacial modification layer for efficient low-temperature processed all-inorganic CsPbI2Br perovskite solar cells

Toward Efficient and Air-Stable Carbon-Based All-Inorganic Perovskite Solar Cells Through Substituting CsPbBr3 Films with Transition Metal Ions

Efficient and Stable Perovskite Solar Cells by B-Site Compositional Engineered All-Inorganic Perovskites and Interface Passivation

3D-2D-0D Interface Profiling for Record Efficiency All-Inorganic CsPbBrI2 Perovskite Solar Cells with Superior Stability

Graded Heterojunction Engineering for Hole-Conductor-Free Perovskite Solar Cells with High Hole Extraction Efficiency and Conductivity.

Tailoring Organic Bulk-Heterojunction for Charge Extraction and Spectral Absorption in CsPbBr3 Perovskite Solar Cells

Enhanced Charge Extraction by Setting Intermediate Energy Levels in All-Inorganic CsPbBr3 Perovskite Solar Cells

CsPbI3 Based All‐Inorganic Perovskite Solar Cells: Further Performance Enhancement of the Electron Transport Layer‐Free Structure from Device Simulation

Optimizing the working mechanism of the CsPbBr3-based inorganic perovskite solar cells for enhanced efficiency

Spontaneous Construction of Multidimensional Heterostructure Enables Enhanced Hole Extraction for Inorganic Perovskite Solar Cells to Exceed 20% Efficiency

Cspb0.9sn0.1ibr2 Based All-Inorganic Perovskite Solar Cells With Exceptional Efficiency And Stability

Multistrategy Toward Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Boosting the Efficiency of Carbon-Based Planar CsPbBr3 Perovskite Solar Cells by a Modified Multistep Spin-Coating Technique and Interface Engineering