Abstract:The limit support pressure significantly influences the stability of the shield tunnel face and deformation control during tunneling. Current research predominantly focuses on soils under dried or saturated conditions. However, unsaturated soils, which are more commonly encountered in engineering practice and widely distributed, have not been as extensively studied. Based on limit equilibrium theory, a modified analytical wedge-prism model is proposed in this paper to predict the limit support pressure acting on the shallow shield tunnel face in unsaturated sandy soil where the soil arching effect is considered. Taking advantage of finite-element software ABAQUS (version 2021), a series of numerical trapdoor tests are conducted first to study the failure behavior of unsaturated sandy soil. Then, by combining the rotation trajectory of major principal stress with the shear strength theory of unsaturated soil, the loosening earth pressure solution above the shallow trapdoor can be derived analytically. The limit support pressure can be finally obtained through a force equilibrium analysis of the wedge body. The accuracy of the proposed model is validated by comparing the calculated results with current model tests and numerical simulations. Parameter analysis results reveal that both the loosening earth pressure and limit support pressure initially decrease and then increase with the rising degree of soil saturation. A critical saturation point is identified where the loosening earth pressure and the limit support pressure reach their minimum values, attributed to the full development of the soil arching effect.

Face Stability Analysis of Shield Tunnel Using Slip Line Method

Upper Bound Analysis of Tunnel Face Stability in Layered Soils

Face stability analysis of shield-driven tunnels shallowly buried in dry sand using 1-g large-scale model tests

STABILITY ANALYSIS OF TUNNEL WORKING FACE IN COMPOSITED SANDY SOIL

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Limit Support Pressure on Tunnel Face at Different Construction Line Slopes by Slip Line Method

An Implementation Of Finite Differential Calculation On Tunnel Face Stability

Upper Bound Analysis for Estimation of the Influence of Seepage on Tunnel Face Stability in Layered Soils

Analytical Approach for Circular‐jointed Shield Tunnel Lining Based on the State Space Method

Analytical Method for Segmental Tunnel Linings Reinforced by Secondary Lining Considering Interfacial Slippage and Detachment

Face stability of large slurry shield-driven tunnel in sands

3d Tunnel Face Stability Of Cross-River Shield Tunnel Considering Water Pressure

An analytical method of continuous upper bound limit analysis for the stability of shallow shield tunnels in cohesive-frictional soils

Stability Analysis of 3D Tunnel Face of Shallow Rectangular Shield Tunnel

A Modified Wedge-Prism Model for Calculating the Limit Support Pressure of a Shallow Shield Tunnel Face in Unsaturated Sandy Soil

Theoretical analysis of the shield tunnel face stability in dry sandy strata

Stability analysis of shield tunnel face in sandy pebble strata considering the route slope angle

Face Stability Analysis for a Shield Tunnel in Anisotropic Sands

Analysis of face stability during excavation of Double-O-Tube shield tunnel

Face Stability of Tunnel in Multi-stratum: Limit Analysis and Numerical Simulation

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling