Abstract:In order to improve the seismic performance, a novel dry-wet hybrid beam-column joint was optimized based on the findings of the preliminary experiment. Four full-scale prefabricated specimens were tested under cyclic loading to further investigate their seismic behavior and explore the various factors, including the connection methods for beam top longitudinal reinforcement in the joint core, magnitude of prestressing force, forms of hoop reinforcement at beam ends, and types of grouting material used in corrugated steel ducts. The results indicate that the new joint failed in the flexural mode, and its experimental bearing capacity value was consistent with the theoretical value, indicating a good safety margin. Additionally, it exhibited remarkable ultimate deformation capacity and displacement ductility coefficient exceeding 3, comparable to cast-in-place structures. The performance indicators of post-tensioned (PT) bar specimens were similar to those of cast-in-place structures and superior to PT rod specimens. The energy dissipation of PT rod specimens accounted for approximately 80 % to 90 % of that of the PT bar specimen. The viscous damping ratios of specimens with PT bars and PT rods were approximately 20 % and 15 %, respectively. Two methods of connecting beam top longitudinal bars by grouting or couplers, accompanied by a local unbonded treatment, could both fulfill anchorage requirements. However, the later one resulted in loosening of steel bars within the connector during late loading stages. The anchoring performance of prestressed grouting material could satisfy the anchoring requirements of PT bars, but still failed to meet the slippage resistance requirements of PT rods. Increasing the prestressing force can enhance the initial stiffness, significantly reduce yield displacement, and improve ductility coefficient, while having minimal impact on strength and energy dissipation. The open composite stirrups at beam ends do not significantly impact overall performance of the joint. The optimal details for the novel joint involves a combination of high-strength PT bars, grouting in corrugated ducts with local debonding treatment, and open composite stirrups at beam ends.

Design, testing and finite element analysis of an improved precast prestressed beam-to-column joint

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental Study of a Novel Precast Prestressed Reinforced Concrete Beam-to-column Joint

Research on design and numerical simulation of self-centering prefabricated RC beam-column joint with pre-pressed disc spring devices

Experimental study on a new type of precast beam-column joint

Finite element analysis of precast concrete beam‐column joint based on bolt connection

Optimal Design of the Connection Between RC Slab and Precast Pre-Stressed Beam to Column Joint

Finite element analysis on static and dynamic performance of composite beam-to-column joint

Experimental seismic study of an innovative precast steel–concrete composite beam–column joint

Experimental study of a new beam-to-column connection for precast concrete frames under reversal cyclic loading

Finite Element Analysis and Design of Retrofitted Beam-to-column Joints with Welded Haunches

Experimental and Numerical Analyses on the Seismic Performance of a Novel Precast Concrete Column-column Joints with Bolted End-plate Connection

Experimental investigation of prefabricated beam-to-column steel joints for precast concrete structures under cyclic loading

Static and Seismic Experimental Study of Novel Prefabricated Beam-Column Joints with Elongated-Hole Brackets

Non-linear 3D finite element analysis of precast reinforced concrete Beam-Column joint under monotonic static load

Finite element simulation of precast moment resisting reinforced concrete beam-column joint subjected to monotonic load

Experimental Study on Seismic Behavior of Precast Assembled Steel–Concrete Beam–Column Composite Joint

Comparative analysis of three design methods for a new type beam-column assembled rigid joint

Optimization and experimental study on seismic performance of precast dry-wet hybrid beam-column joint with local prestressing