Abstract:Radio frequency (RF) heating has the potential to inactivate pathogens without causing severe food quality degradation due to its fast heating rate and volumetric heating mode. However, heating uniformity is an obstacle that needs to be overcome before commercial applications. In a pasteurization process, underheating may lead to pathogen survival, which should be avoided, but severe overheating normally causes food quality deterioration. To minimize quality losses, RF heating uniformity should be improved. In this study, a new heating pattern of RF heating on low-moisture foods was researched to obtain better heating uniformity: the temperatures on the top surface and in the inner part of a sample were higher than the pasteurization temperature. The temperatures of other parts, including the bottom and side surface, might be lower than the pasteurization temperature, but this could be easily remedied by conventional heat transfer methods, such as a water bath, after RF heating. At the same time, the proportion of overshoot temperatures in the sample should be controlled as small as possible. To assess the heating uniformity, two new indexes (OTCI and TPD) were developed, which refer to the severity of overshoot temperatures and the targeted penetration depth that needs to be achieved by conventional heat transfer methods after RF heating, respectively. The new heating uniformity evaluation method considers that the temperatures between the pasteurization temperature and the control temperature in the treated material meet the requirement for pasteurization, and including these temperatures into a uniformity index does not help with developing a thermal pasteurization protocol. The study indicated that a better RF heating pattern could be achieved when the sample was placed close to the top electrode with an appropriately sized polyetherimide (PEI) block under the sample. For peanut butter loaded into a cylindrical polypropylene container (50 mm height, 100 mm i.d.) with a 25.5 mm height to the bottom electrode and an 84 mm electrode gap in a 6 kW, 27.12 MHz RF machine, adding a cylindrical PEI block with a thickness of 12.7 mm and radius of 40 mm below the peanut butter container led to the best heating uniformity among all studied dimensions, resulting in OTCI and TPD values of 0.0076 and 4.94 mm, respectively.

Validation of radio frequency assisted traditional thermal processing for pasteurization of powdered infant formula milk

Effects of radio frequency on physicochemical properties of powdered infant formula milk as compared with conventional thermal treatment

Effects of Radio Frequency Heating on the Glass Transition, Protein Structure, and Volatile Compounds Profile of Commercial Powdered Infant Formula Milk

Thermal Inactivation of Cronobacter Sakazakii ATCC 29544 in Powdered Infant Formula Milk Using Thermostatic Radio Frequency

Dielectric Properties of Powdered Infant Formula Milk As Influenced by Frequency, Temperature and Main Components

Compression Heating and Temperature Control for High-Pressure Destruction of Bacterial Spores: An Experimental Method for Kinetics Evaluation

Apple Juice Preservation Using Combined Nonthermal Processing and Antimicrobial Packaging.

Effect of Low-Temperature-High-Pressure Treatment on the Reduction of <i>Escherichia coli</i> in Milk

Comparison Ofcronobacter Sakazakiithermal Death Kinetics in Powdered Infant Formula Milk Using Hot Water and Combined Radio Frequency and Hot Air Treatment

Quality And Consumer Acceptance Of Radio Frequency And Traditional Heat Pasteurised Kiwi Puree During Storage

Radio frequency-only thermal processing of skimmed milk powder: Case study on the influence of RF heating profile on quality and Salmonella Typhimurium inactivation

Radiofrequency-Assisted Thermal Processing of Soft Wheat Flour

Quality Analysis of All‐purpose Wheat Flour Pasteurized with Radiofrequency‐assisted Hot Air Heating

Surface free fat bridging contributes to the stickiness of powdered infant formula milk pasteurized by radio frequency dry heat treatment

HEATING UNIFORMITY EVALUATION AND IMPROVEMENT OF RADIO FREQUENCY TREATED PREPACKAGED FOOD

Radio frequency inactivation of Salmonella Typhimurium and Listeria monocytogenes in skimmed and whole milk powder

A New Strategy to Improve Heating Uniformity of Low Moisture Foods in Radio Frequency Treatment for Pathogen Control

Methods to Obtain Thermal Inactivation Data for Pathogen Control in Low-Moisture Foods

Radio frequency pasteurization and disinfestation techniques applied on low-moisture foods.

Inactivation of Cronobacter sakazakii in powdered infant formula with probiotics and metagenomic analysis

Thermal Behavior of CMC Solutions under Simulation of Radio Frequency Pasteurization