Abstract:Analyzing plastic flow in refractory alloys is relevant to many different commercial and technological applications. In this study, screw dislocation statics and dynamics were studied for various compositions of the body-centered cubic binary alloy tungsten–molybdenum (W–Mo). The core structure did not appear to change for different alloy compositions, consistent with the literature. The pure tungsten and pure molybdenum samples had the lowest plastic flow, while the highest dislocation velocities were observed for equiatomic, W0.5Mo0.5 alloys. In general, dislocation velocities were found to largely align with a well-established dislocation mobility phenomenological model supporting two discrete dislocation mobility regimes, defined by kink-pair nucleation and migration and phonon drag, respectively. Velocities were observed to increase with temperature and applied shear stress and with decreasing kink-pair formation energies. The 50 at. % W alloy was found to possess the lowest kink-pair formation energy, consistent with its higher dislocation velocity. Furthermore, molybdenum segregation to the dislocation line was found to be thermodynamically favorable specifically at low temperatures and was observed to significantly delay the onset of dislocation glide and then generally enhance dislocation velocities thereafter. This behavior was explained by examining the energy landscape of dislocation glide. Furthermore, a segregation/de-segregation phase transition was observed to occur around 2500 K beyond which no preferential segregation to the dislocation was found. Overall, our findings suggest strong dependencies of plastic flow in W–Mo alloys on composition and elemental segregation, in agreement with the available literature, and may provide useful information to guide the design of next generation structural materials.

Pressure Effect on Core Structures and Yield Behaviors of ?111? Screw Superdislocations in FeAl

Cross-slip Mechanisms of 〈111〉 Screw Superdislocations in FeAl

Core Structures and Planar Faults Associated with <111> Screw Superdislocations in B2 Alloys

Modulating Superdislocation Cores and Planar Faults of Ni3Al Through Applied Stresses

Modulating superdislocation cores and planar faults of Ni 3 Al through applied stresses

The influence of transition metal solutes on dislocation core structure and values of Peierls stress and barrier in tungsten

Deformation behaviors in light of dislocation core characteristics with respect to the compositional-dependent misfit potentials of aluminum alloys

Core Structure Of A < 100 > Superdislocations In A Single-Crystal Superalloy During High-Temperature And Low-Stress Creep

Effects of Pressure on the Generalized Stacking Fault Energy and Twinning Propensity of Face-Centered Cubic Metals

Physical properties and Debye temperature of Al7Cu2Fe alloy under various pressures analyzed by first-principles

Quantitative Characterization of Planar Faults with Dissociated <111> Screw Super-Dislocations in B2 Alloys

Atomistic Study of Fundamental Character and Motion of Dislocations in Intermetallic Al2Cu

Quantitative Analysis of the Yield Behavior of a 〈1 1 1〉/2 Screw Dislocation in Α-Iron

Core Structure of A〈100〉 Superdislocations in a Single-Crystal Superalloy During High-Temperature and Low-Stress Creep

Interfacial dislocation evolution and yield mechanism of nickel-based single crystal superalloy: A molecular dynamics research

Atomistic and Continuum Study of Interactions Between Super-Screw Dislocations and Coherent Twin Boundaries in L12-structured Ni3Al

First-Principles Study of Physical Properties of (110) Symmetric Small-Angle Tilting Grain Boundary with Full Dislocation in Aluminum

〈110〉{111} Dislocation Core Properties in L12 Al3 Sc and Al3 Mg Based on the Peierls-Nabarro Model

The behavior of 12⟨111⟩ screw dislocations in W–Mo alloys analyzed through atomistic simulations

The Influence of Grain Boundaries on Crystal Structure and Tensile Mechanical Properties of Al0.1CoCrFeNi High-Entropy Alloys Studied by Molecular Dynamics Method

Anomalous dislocation core structure in shock compressed bcc high-entropy alloys