Abstract:Solid oxide fuel cell (SOFC), which is a generation device that converts chemical energy into electrical energy, has been regarded as a new generation device. The diffusion mechanism of metal cations and anions during the high‐temperature oxidation process of SOFC is proposed. Based on the equilibrium expression and diffusion equation, the chemo‐mechanical coupling relationship between oxide stress and thickness growth of the oxide layer is established by considering the influences of viscoplastic effect and oxide growth effect. The present theoretical result is consistent with the previous experimental results. In addition, the stress critical points corresponding to different parameters are different in initial oxidation stage. The oxide stress varies dramatically with time in the compressive stress phase, but it changes slowly in the tensile stress phase. The compressive stress that exists in the oxide layer increases with the growth coefficient (DNiO = 1000‐15 000 m−1) of the oxide layer. The oxide stresses in oxide layer and electrolyte reduce with viscoplastic coefficient of the oxide layer from JNiO = 8.97 × 10−5 Pa−1 s−1 to JNiO = 16.97 × 10−5 Pa−1 s−1 and anode‐oxide layer thicknesses from H = 30 μm to H = 660 μm, while they increase with viscoplastic coefficient of the anode from JNi = 3.81 × 10−5 Pa−1 s−1 to JNi = 12.81 × 10−5 Pa−1 s−1 and kinetic parabolic constant from kp = 2.9 × 10−15 m2s−1 to kp = 12.9 × 10−15 m2s−1 in whole oxidation stage. The oxide thickness increases with kinetic parabolic constant in the whole oxidation stage and this changing trend accords with parabolic diffusion law. The oxide thickness increases with temperatures increasing. The results obtained from this study will provide the reference to the researches of the chemo‐mechanical coupling model and performance optimization of SOFC under high‐temperature oxidation.

The Thermal Effects of All Porous Solid Oxide Fuel Cells

Modeling of All Porous Solid Oxide Fuel Cells

Modeling of All-Porous Solid Oxide Fuel Cells with a Focus on the Electrolyte Porosity Design

Thermal Stress Analysis of a Planar Anode-Supported Solid Oxide Fuel Cell: Effects of Anode Porosity

Numerical Study on Electric Characteristics and Thermal Stresses of Solid Oxide Fuel Cells

Thermal Modelling of Ethanol-Fuelled Solid Oxide Fuel Cells

Thermal Stress Analysis at the Interface of Cathode and Electrolyte in Solid Oxide Fuel Cells

Chemo‐mechanical coupling model of solid oxide fuel cell under high‐temperature oxidation

Construction of a Transient Multi-Physics Model of Solid Oxide Fuel Cell Fed by Biomass Syngas Considering the Carbon Deposition and Temperature Effect

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Structure optimization and thermal field analysis of biogas derived methane fueled Solid Oxide Fuel Cell

A General Mechanistic Model of Solid Oxide Fuel Cells

Solid Oxide Fuel Cell Porous Cathode Micro Modeling and Performance Prediction

The Thermal Effect in Direct Carbon Solid Oxide Fuel Cells

Lattice Boltzmann Modeling of Carbon Deposition in Porous Anode of a Solid Oxide Fuel Cell with Internal Reforming

Numerical study of thermoelectric characteristics of a planar solid oxide fuel cell with direct internal reforming of methane

Coupled Electrochemical-Thermo-Stress Analysis for Methanol-Fueled Solid Oxide Fuel Cells

Investigation of Thermal Radiation Effects on Solid Oxide Fuel Cell Performance by A Comprehensive Model

Anode-Oxidizing Critical Operating Conditions of Large Planar Solid Oxide Fuel Cell

Evaluating the influence of working parameters on the efficiency of a solid oxide fuel cell by conducting sensitivity analysis using electrochemical and thermodynamic modeling

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell