Abstract:Purpose The purpose of this paper is to study the heat transfer effect of copper sensor and skin simulant on skin. Design/methodology/approach For the sensor, the physical and mathematical models of the thermal sensors were used to obtain the definite conditions in the heat transfer process of the sensor, and the heat transfer models of the two sensors were developed and solved respectively by using ANSYS WORKBENCH 19.0 software. The simulation results were compared with the experimental test results. For the skin, the numerical model of the skin model was developed and calculated. Finally, the heat transfer simulation performance of the two sensors was analyzed. Findings It is concluded that the copper sensor is more stable than the skin simulant, but the material and structure of the skin simulant is more suitable for skin simulation. The skin simulant better simulates the skin heat transfer. For all the factors in the model, the thermal properties of the material and the heat flux level are the key factors. The convective heat transfer coefficient, radiation heat transfer rate and the initial temperature have little influence on the results, which can be ignored. Research limitations/implications The results show that there are still some differences between the experimental and numerical simulation values of the skin simulant. In the future, the thermal parameters of skin simulant and the influence of the thermocouple adhesion should be further examined during the calibration process. Practical implications The results suggest that the skin simulant needs to be further calibrated, especially for the thermal properties. The copper sensor on the flame manikin can be replaced by the skin simulant with higher accuracy, which will be helpful to improve the accuracy of performance evaluation of thermal protective clothing. Social implications The application of computational fluid dynamics (CFD) technology can help to analyze the heat transfer simulation mechanism of thermal sensor, explore the influence of thermal performance of thermal sensor on skin simulation, provide basis for the development of thermal sensor and improve the application system of thermal sensor. Based on the current research status, this paper studies the internal heat transfer of the sensor through the numerical modeling of the copper sensor and skin simulant, so as to analyze the effect of the sensor simulating skin and the reasons for the difference. Originality/value In this paper, the sensor itself is numerically modeled and the heat transfer inside the sensor is studied.

Analysis of Heat Transfer Performance of Thermal Suit Based on Fourier Law

Time-dependent analysis of 3D thermo-mechanical behavior of a layered half-space with anisotropic thermal diffusivity

A Theory For Electromagnetic Heat Conduction And A Numerical Model Based On Boltzmann Equation

Study of Heat Conduction Transfer Functions of Fins

Finite Element Analysis of 3D Heat Transfer of Typical Thermal Bridge of Self-Thermal Insulation in Hot-Summer and Cold-Winter Zone

Modeling of Heat and Moisture Transfer Within Firefighter Protective Clothing with the Moisture Absorption of Thermal Radiation

ANALYSIS OF NON-FOURIER THERMAL BEHAVIOUR FOR MULTI-LAYER SKIN MODEL

Quantitative Assessment of the Relationship Between Radiant Heat Exposure and Protective Performance of Multilayer Thermal Protective Clothing During Dry and Wet Conditions

Study On Heat Transfer Of Liquid Cooling Garment Based On A Novel Thermal Manikin

Numerical Investigation of Phase Change Protective Clothing

Analysis and Modelling of Non-Fourier Heat Behavior Using the Wavelet Finite Element Method

Heat transfer simulation of electric heating fabric system and parametric design: Towards human thermal comfort and energy efficiency

Cold-preventing simulation of low-temperature protective clothing based on an unsteady one-dimensional heat conduction model

Numerical study of heat and moisture transfer in thermal protective clothing against a coupled thermal hazardous environment

Numerical investigation of the influence of thermal protective fabric deformation on heat transfer from thermal radiant heat to human skin

Modeling of Heat Transfer through Firefighters Multilayer Protective Clothing Using the Computational Fluid Dynamics Assisted by X-ray Microtomography and Thermography

Infrared non-destructive detection of abnormal heat information inside body by simulation

Transformation Thermotics for Thermal Conduction and Convection

Design and performance evaluation of a firefighting protective suit with an incorporated liquid-cooled system

Development and application of numerical model of thermal sensors for thermal protective clothing evaluation based on CFD simulation

General Heat Conduction Equations Based on the Thermomass Theory