Abstract:A series of novel amphibious organic/inorganic hybrid proton exchange membranes with H3PO4 doped which could be used under both wet and dry conditions was prepared through a sol-gel process based on acrylated triethoxysilane(A-TES) and benzyltetrazole-modified triethoxysilane(BT-TES). The dual-curing approach including UV-curing and thermal curing was used to obtain the crosslinked membranes. Polyethylene glycol(400) diacrylate(PEGDA) was used as an oligomer to form the polymeric matrix. The molecular structures of precursors were characterized by H-1, C-13 and Si-29 NMR spectra. The thermogravimetric analysis(TGA) results show that the membranes exhibit acceptable thermal stability for their application at above 200 degrees C. The differential scanning calorimeter(DSC) determination indicates that the crosslinked membranes with the mass ratios of below 1.6 of BT-TES to A-TES and the same mass of H3PO4 doped as that of A-TES possess the To, and the lowest 75-28.9 degrees C) exists for the membrane with double mass of H3PO4 doped as well. The high proton conductivity in a range of 9.4-17.3 mS/cm with the corresponding water uptake of 19.1%-32.8% of the membranes was detected at 90 degrees C under wet conditions. Meanwhile, the proton conductivity in a dry environment for the membrane with a mass ratio of 2.4 of BT-TES to A-TES and double H3PO4 loading increases from 4.89x10(-2) mS/cm at 30 degrees C to 25.7 mS/cm at 140 degrees C. The excellent proton transport ability under both hydrous and anhydrous conditions demonstrates a potential application in the polymer electrolyte membrane fuel cells.

Preparation and Properties of Hybrid Silane-crosslinked Sulfonated Poly(aryl ether ketone)s as Proton Exchange Membranes

Effect of “bridge” on the performance of organic-inorganic crosslinked hybrid proton exchange membranes via KH550

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

A Novel Crosslinking Organic–inorganic Hybrid Proton Exchange Membrane Based on Sulfonated Poly(arylene Ether Sulfone) with 4-Amino-phenyl Pendant Group for Fuel Cell Application

Organic–inorganic Hybrid Proton-Conducting Electrolyte Membranes Based on Sulfonated Poly(arylene Ether Sulfone) and SiO2–SO3H Network for Fuel Cells

Covalently and ionically crosslinked sulfonated poly(arylene ether ketone)s as proton exchange membranes

Novel hybrid polymer electrolyte membranes prepared by a silane-cross-linking technique for direct methanol fuel cells

SPES‐SiO2 Hybrid Proton Exchange Membranes from in Situ Sol–gel Process of Negatively Charged Alkoxysilane

Covalently Cross-Linked Proton Exchange Membranes Based on Sulfonated Poly(Arylene Ether Ketone) and Polybenzimidazole Oligomer

A Facile Route to Enhance the Properties of Polymer Electrolyte-Based Organic–inorganic Hybrid Proton Exchange Membranes

Chemically stable hybrid polymer electrolyte membranes prepared by silane-crosslinking and thiol-ene click chemistry

High proton conductivity and low fuel crossover polymer electrolyte membranes derived from branched sulfonated poly(ether ether ketone)s and silica sulfonic acid nanoparticles

Preparation of a Cross-linked Sulfonated Poly(arylene ether ketone) PEM with Enhanced Proton Conductivity and Methanol Resistance by Introducing Ionic Liquid Impregnated MOF.

Synthesis and crosslinking of hydroxyl-functionalized sulfonated poly(ether ether ketone) copolymer as candidates for proton exchange membranes

Novel Hybrid Polymer Electrolyte Membranes with High Proton Conductivity Prepared by a Silane-Crosslinking Technique for Direct Methanol Fuel Cells

Preparation and Evaluation of Crosslinked Sulfonated Polyphosphazene with Poly(aryloxy Cyclotriphosphazene) for Proton Exchange Membrane

In-Situ Self-Crosslinked Sulfonated Poly(Arylene Ether Ketone) with Alkyl Side Chain for Enhanced Performance

Preparation and Conducting Behavior of Amphibious Organic/Inorganic Hybrid Proton Exchange Membranes Based on Benzyltetrazole

Crosslinked sulfonated poly(arylene ether ketone) with pendant carboxylic acid group via poly(ethylene glycol) for proton exchange membrane

Novel Hybrid Acid–base Membranes Based on Sulfonated Poly(arylene Ether Sulfone), Tetraethoxysilane and (3-Aminopropyl)triethoxysilane for Fuel Cell Application