Abstract:The slab laser is a promising architecture to achieve high beam quality and high power. By propagating the laser beams in zigzag geometries, the temperature gradient in the gain medium can be well averaged, and the beam quality in this direction can be excellent. However, the temperature gradient in the non-zigzag direction is not compensated, resulting in aberrations in this direction which lead to poorer beam quality. Among the overall aberrations, the main contributors are two low-order aberrations: astigmatism and defocus. These aberrations will magnify beam divergence angle and degrade beam quality. If the beam divergence angles in both directions are almost zero, the astigmatism and defocus are well corrected. Besides, the output beams of slab lasers are generally in a rectangular aperture with high aspect ratio (normally 1: 10), which need to be reshaped into square in many applications. In this paper, a new method is proposed to correct low-order aberrations and reshape the beams of slab lasers. Three lenses are adapted, one is a spherical lens and the others are cylindrical lenses. These lenses work as a beam shaping system, which converts the beam from rectangular into square and the low-order aberrations are compensated simultaneously. Two wavefront sensors are used to detect input and output beam parameters. The initial size of the beam is 4mmx20mm, and peak to valley (PV) value of the wavefront is several tens of microns. Simulation results show that after correction, the dimension becomes 40mmx40mm, and peak to valley (PV) value of the wavefront is less than 1microns.

Intra-Cavity Aberration Compensation in 100 W-Order Unstable Ring Slab Lasers

Beam Wavefront Dynamical Compensation by Aberrations of the Gain Medium in Laser Amplifiers for Beam Quality Improvement.

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Automatic Low-Order Aberration Compensator for Solid-State Slab Lasers

Intracavity Adaptive Correction of an Unstable Standing-Wave Resonator Based on Reconstruction Matrix Optimization

Compensation of Low Order Aberrations with Reflective Beam Shaping System

Actively Compensation of Low Order Aberrations by Refractive Shaping System for High Power Slab Lasers

Automatic Low-Order Aberration Correction Based on Geometry Optics: Simulations

Automatic Low-Order Aberrations Compensator for a Conduction-Cooled End-Pumped Solid-State Zigzag Slab Laser

Adaptive aberration correction of a 5 J/6.6 ns/200 Hz solid-state Nd:YAG laser.

Investigation of Solid-State Lasers Aberration Compensation Using an Intra-Cavity Adaptive Optic Mirror

Wavefront Pre-Compensation for Thermal Deformations in a High Power Inner Optical System

Analysis of Laser Modes in High Power Unstable Resonators with Intra-Cavity Wavefront Aberrations

Aberrations Correction of a Nd:YAG Slab Amplifier Using a Compact Adaptive Optics System

Realization of Narrow Linewidth Property Based on Ultra-Stable Cavity in Precision Optics Teaching

Wavefront Shaping by A Small-Aperture Deformable Mirror in the Front Stage for High-Power Laser Systems

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

Method for Annular Aberration Correction of Large-Aperture Thin-Wall Tube Lasers

Automatic Low-Order Aberration Correction Based on Geometrical Optics for Slab Lasers.

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Numerical simulation of 30-kW class liquid-cooled Nd:YAG multi-slab resonator