Abstract:The most common beneficiation method for feldspar is flotation with a cationic (amine) collector under acidic conditions. However, there are several disadvantages to this, such as environmental pollution and equipment corrosion. In order to resolve such problems, it is important to study the flotation of feldspar using anionic collectors under natural pH conditions. The purpose of this paper is to study the effects and mechanism of Fe3+ on flotation separation of feldspar and epidote using sodium oleate (NaOL) at a natural pH. Through flotation experiments, adsorption measurements, zeta potential testing, FTIR analysis and X-ray photoelectron spectroscopy (XPS), the mechanism of Fe3+ on the surface of feldspar and epidote is revealed, and the reason behind the difference in flotation of the two minerals is discussed. The flotation test results show that Fe3+ can significantly improve the flotation behavior of minerals when NaOL is used as a collector under natural pH, and the highest recovery rates of feldspar and epidote are 90% and 43%, respectively. Analysis of the solution and adsorption measurement results show that Fe3+ is adsorbed on the minerals′ surface in the form of Fe(OH)3, which promotes the adsorption of NaOL on the minerals’ surface through Fe(OH)3, activating the flotation of feldspar and epidote. The difference in adsorption of Fe3+ between feldspar and epidote is the reason for this difference in flotation behavior. The results of the zeta potentials show that after being treated with Fe3+, the electrostatic adsorption of NaOL displays a significant negative shift on the surface of feldspar, while there is almost no electrostatic adsorption of NaOL on the surface of Fe3+-treated epidote. FTIR analysis confirmed that the difference in the adsorption of Fe3+ and NaOL on the surface of feldspar and epidote is due to the fact that there are more active particles (metal bonds) on the surface of feldspar than on the surface of epidote, and the properties of these metal bonds can be changed by Fe3+, which allows NaOL to be more easily adsorbed on the mineral surface through –COO−. The possible adsorption form is “mineral-Fe3+–COO−“. Compared with the infrared spectrum of epidote, there is a new absorption peak at 1713.68 cm−1, which can be attributed to the C=O characteristic peak of NaOL in the infrared spectrum of Fe3+–NaOL-treated feldspar, which is why the floatability of feldspar is better than epidote. XPS confirmed that the Fe on the surface of feldspar is Fe3+ in the form of Fe(OH)3, while Fe on the surface of epidote is mainly Fe2O3 (Fe–O) contained in mineral crystals. Furthermore, there is less adsorption of Fe3+ on the surface of epidote, and this discrepancy leads to the difference in the adsorption of NaOL on the minerals’ surface, which itself leads to the difference in flotation behavior between feldspar and epidote. These findings indicate that the flotation separation of feldspar and epidote can be achieved using Fe3+ and NaOL under natural pH. This study may provide a reference for the flotation mechanism of feldspar and epidote under natural pH.

Influence of Aluminum–sodium Silicate on Olivine Flotation with Sodium Oleate

Flotation separation of homogenized fluorite and calcite using sodium silicate and AlCl 3 as a combined depressant

The flotation behaviour of N-(3-aminopropyl)-dodecanamide on three aluminosilicates

Effect of Depressants on Flotation Separation of Magnesite from Dolomite and Calcite

The Chain Length and Isomeric Effects of Monohydric Alcohols on the Flotation of Magnesite and Dolomite by Sodium Oleate

The Effect of Sodium Alginate on Chlorite and Serpentine in Chalcopyrite Flotation

Fe(III) As an Activator for the Flotation of Spodumene, Albite, and Quartz Minerals

The Effect of Sodium Alginate on the Flotation Separation of Scheelite from Calcite and Fluorite

Investigation on the Flotation of Aluminosilicates Using N-(2-Aminoethyl)-dodecanamide

Effects and Mechanism of Fe3+ on Flotation Separation of Feldspar and Epidote with Sodium Oleate at Natural pH

Mechanism of Fe(III)-modified silicate in the flotation separation of spodumene and albite: An experimental and theoretical study

Mechanism of Fe(Ⅲ)-modified Silicate in the Flotation Separation of Spodumene and Albite: an Experimental and Theoretical Study

The Combined Application of Na2SiO3 and Mn2+ Enhancing the Flotation Separation of Quartz and Kaolinite by NaOL

Research on Relation of Novel Organosilicon Cation Surfactant QAS222 and Aluminosilicate Mineral Flotation Behaviors

Flotation Behavior and Mechanism of Andalusite and Quartz in the Presence of Sodium Oleate

Effect of sodium silicate modified with Fe2+ and Al3+ as dispersant on flotation of molybdenite and chalcopyrite in presence of kaolinite and seawater

Flotation of Aluminosilicates Using N-(3-aminopropyl)-dodecanamide

Behavior and Mechanism of Sodium Sulfite Depression of Almandine from Rutile in Flotation System

Synergy Effect Between Sodium Oleate and Alcohol Ethoxylates on the Reverse Flotation of Quartz

Quantitative analysis of surface adsorption reactivity during flotation process by surface complexation model: diaspore and kaolinite

Surface Crystal Chemistry of Spodumene with Different Size Fractions and Implications for Flotation