Abstract:Organic carbonyl compounds have received great attention as electrode materials because of their fast reduction–oxidation kinetics, environment friendliness, and high theoretical capacity. Especially, the small molecular quinones, such as anthraquinone（AQ）, can possess high theoretical(257 mA·h·g -1 ) and a discharge–charge voltage of 2.2–2.3 V, implying that it has the potential of up to 565 W·h·kg -1 energy density. However, it suffers from high solubility in organic electrolytes and low conductivity,leading to rapid capacity fading and inferior rate performance. Herein, we report 2,6-diaminoanthraquinone（2,6-AAQ） uniform selfassembly into a three-dimensional（3D） porous structure graphene foam, which was successfully fabricated through a gentle hydrothermal synthesis reaction with simultaneous in situ condensation of 2,6-AAQ on the reduced graphene surface, as a highperformance cathode for Lithium-organic batteries. Benefiting from the formation of a covalent bond（—CO—NH —） between the amino group（—NH 2 ） of 2,6-AAQ and the carboxyl group（—COOH） of oxidized graphene, the molecular structure of AQ is uniformly anchored into a 3D graphene foam architecture. The strategy simultaneously solved the high dissolution and low conductivity of AQ.The as-obtained hybrid composites were characterized by various techniques. SEM and EDS mapping images demonstrated that the 2,6-AAQ within the hybrid architecture was not only uniformly anchored on the surface but also tightly wrapped in the interior of graphene foam. This unique architectural structure can improve the electronic conductivity of 2,6-AAQ in the lithiation process and effectively inhibit the dissolution of 2,6-AAQ in electrolytes, which is beneficial to hoist the electrochemical performance of the composite materials. XPS, XRD, FTIR, and Raman results indicated that hydrothermally assisted chemical bonding occurred between 2,6-AAQ and r GO, significantly facilitating the mass electron transformation and ion diffusion from graphene substrate to 2,6-AAQ for the fast reduction–oxidation reaction. Combined with the above results, UV–Vis spectroscopy tests also further disclosed that the 2,6-AAQ and r GO linked by covalent bonds significantly decrease solubility compared with 2,6-AAQ, indicating the greatly increased cycling stability of the hybrid material. Additionally, ex situ FTIR characterization results verified that the composite cathode material with two carbonyls（C=O） active sites has good lithium storage performance. By optimizing the 2,6-AAQ concentration, the 25% 2,6-AAQ in the asprepared composite was used as the high-performance cathode for the lithium-ion battery. The composite material can display a high initial discharge capacity of 212.2 mA·h·g -1 at 100 mA·g -1 （based on the 2,6-AAQ mass） and a reversible capacity of 184 mA·h·g -1 with a capacity retention of 86.7% after 100 cycles at 500 mA·g -1 current density. This excellent electrochemical performance is attributed to fast lithium-ion diffusion and electric transport between the 2,6-AAQ and the 3D porous structure hybrid architecture, which also proposes a facile strategy for the immobilization of the small molecular quinones to construct advanced organic lithium batteries.

Ultrahigh-capacity Tetrahydroxybenzoquinone Grafted Graphene Material As a Novel Anode for Lithium-Ion Batteries

Oxygen Activity Excited Thiophene-Diketopyrrolopyrrole-Based Organic Molecules As Anode for Lithium-Ion Batteries with Enhanced Interfacial Storage Capacity and Long Cycling Capability

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Imino-Linked Carbonyl-Enriched Polymer as a High-Performance Cathode Material for Lithium-Ion Batteries

Strongly Coupled Perylene Bisimide/reduced Graphene Oxide As Organic Cathode Materials for Lithium Ion Batteries

High-performance Li-ion Batteries Based on Graphene Quantum Dot Wrapped Carbon Nanotube Hybrid Anodes

OH-substituted 2, 3-Dichloro-5, 6-Dicyano-1, 4-Benzoquinone As Highly Stable Organic Electrode for Lithium Ion Battery

Polycarbonyl(quinonyl) Organic Compounds As Cathode Materials for Sustainable Lithium Ion Batteries

Surpassing the Organic Cathode Performance for Lithium-Ion Batteries with Robust Fluorinated Covalent Quinazoline Networks

Significantly Stable Organic Cathode for Lithium-Ion Battery Based on Nanoconfined Poly(anthraquinonyl Sulfide)@mof-Derived Microporous Carbon

Conjugated Polymer/Graphene composite as conductive Agent-Free electrode materials towards High-Performance lithium ion storage

Preparation of 2,6-Diaminoanthraquinone/reduced Graphene Oxide-Based Composites As Cathode Materials for Organic Lithium Batteries

A Novel Graphene-Polysulfide Anode Material for High-Performance Lithium-Ion Batteries

Three-dimensional VS4/graphene Hierarchical Architecture As High-Capacity Anode for Lithium-Ion Batteries

High-performance lithium-ion batteries based on polymer/graphene hybrid cathode material

Covalent organic framework with active C=O/C=N groups for high performance cathode material for lithium‐ion batteries

A Highly Immobilized Organic Anode Material for High Performance Rechargeable Lithium Batteries

Free-Standing Poly(vinyl benzoquinone)/Reduced Graphene Oxide Composite Films as a Cathode for Lithium-Ion Batteries

Lithium titanate nanoplates embedded with graphene quantum dots as electrode materials for high-rate lithium-ion batteries

Achieving of High Density/Utilization of Active Groups Via Synergic Integration of C=N and C=O Bonds for Ultra-Stable and High-Rate Lithium-Ion Batteries

Mesoporous Li3VO4/C Submicron‐Ellipsoids Supported on Reduced Graphene Oxide as Practical Anode for High‐Power Lithium‐Ion Batteries