Abstract:Technical advances in hydraulic fracturing and horizontal drilling technologies enable shale to be commercially exploited. Due to the technical and economic limitations of well testing in shale gas plays, rate transient analysis has become a more attractive option. After hydraulic fracturing, flow mechanisms in multiple scaled pores of shale become extraordinarily complicated: adsorption in nanopores, diffusion in micropores, and non-Darcy flow in macropores. Moreover, shale gas reservoirs are stress-sensitive because of ultralow permeability and diffusivity in a matrix. Furthermore, the porosity and permeability of natural fractures are stress-dependent as well. Accounting for all of these complex flow mechanisms, especially the aforementioned stress-sensitive parameters, a semianalytical production solution of a multiple fractured horizontal well (MFHW) can rapidly predict the entire production behavior. Scholars have done much work on the complex flow mechanisms of shale. Most models regarded permeability as a stress-sensitive parameter while diffusivity and porosity were considered to be a constant. However, diffusivity and porosity were proved to be stress-sensitive as experimental science developed. In this study, we present a novel semianalytical model for rate transient analysis of MFHW, which simultaneously incorporates multiple stress-sensitive parameters into flow mechanisms. Substituting stress-dependent parameters (diffusivity, porosity, and permeability) into governing equations resulted in strong nonlinearities, which was solved by employing the perturbation method. Production behaviors with only stress-sensitive permeability were compared with multiple stress-dependent parameters. The new model with multiple stress-sensitive parameters declined slower than the permeability-sensitive model, and the new model matched better with the field data. In addition, the effects of major stress-sensitive parameters on production decline curves were analyzed by the proposed model. The sensitivity analysis indicated that different parameters had their own degree of sensitivity intensity and influence on the production period. Finally, 1001 wells from the Marcellus shale play were divided into three well groups. Estimated inversion values of reservoir parameters from the three well groups and relevant single wells were consistent with the field data. The inverted values of single wells fluctuate within the inversion values of well groups, which indicates that the production behavior of well groups could be a guide for rate transient analysis of a single well in shale gas reservoirs.This article has not yet been cited by other publications.

Use of a New Analytical Model to Match Production Data and Identify Opportunities to Maximize Well Productivity in the Tuscaloosa Marine Shale Reservoir

Productivity Analysis of Multi-Fractured Shale Oil Wells Accounting for the Low-Velocity Non-Darcy Effect

A coupled matrix-fracture productivity calculation model considering low-velocity non-Darcy flow in shale reservoirs

A Mathematical Model for Predicting Long-Term Productivity of Channel-Fractured Shale Gas/Oil Wells

A Productivity Prediction Model for Multistage Fractured Horizontal Wells in Shale Gas Reservoirs

A Fractional Step Method to Solve Productivity Model of Horizontal Wells Based on Heterogeneous Structure of Fracture Network

Productivity Model for Multi-Fractured Horizontal Wells with Complex Fracture Networks in Shale Oil Reservoirs Considering Fluid Desorption and Two-Phase Behavior

A New Approach to Embed Complex Fracture Network in Tight Oil Reservoir and Well Productivity Analysis

Novel Model for Rate Transient Analysis in Stress-Sensitive Shale Gas Reservoirs

Productivity Prediction Model for Horizontal Wells of Shale under Cyclic Conflagration Compression Fracturing Percussion

Gas Flowrate Evaluation in Coal Coupling the Matrix Shrinkage Effect Caused by Water Extraction

Productivity performance of open hole horizontal gas well for low permeability gas reservoirs

New model for productivity test of horizontal well after hydraulic fracturing

Effect of Cross-Well Natural Fractures and Fracture Network on Production History Match and Well Location Optimization in an Ultra-Deep Gas Reservoir

Fractured Horizontal Well Productivity Prediction in Tight Oil Reservoirs

Productivity Model Study of Water-Bearing Tight Gas Reservoirs Considering Micro- to Nano-Scale Effects

An Accurate Calculation Method on Blasingame Production Decline Model of Horizontal Well with Dumbbell-like Hydraulic Fracture in Tight Gas Reservoirs

Fracture Spacing Optimization Method for Multi-Stage Fractured Horizontal Wells in Shale Oil Reservoir Based on Dynamic Production Data Analysis

New Method for Capacity Evaluation of Offshore Low-Permeability Reservoirs with Natural Fractures

Productivity Analysis of Fractured Well in Low Permeability Gas Reservoir

Analytical Model for Rate Transient Behavior of Co-Production between Coalbed Methane and Tight Gas Reservoirs