Abstract:Li2MnO3 stabilizes the structure of Li M O2 ( M = Mn, Ni, Co, etc.) and makes Li-rich layer-structured xLi2MnO3·(1-x)Li M O2 (0<x<1.0, M = Mn, Ni, Co, etc.) composites (or solid solutions) become potential cathode materials for high energy density lithium ion batteries. However, as Mn4+ is inactive in Li2MnO3, the charge compensation from O2- ions during the initial delithiation and the irreversible layer-to-spinel structural transition in the subsequent lithiation makes the composite suffer from drawbacks such as low initial coulombic efficiency, discharge voltage and energy density falling, and poor rate performance during cycling as well as safety hazard in the initial cycle. Although surface modification, atomic substitution and optimization of synthesis strategies have been pursued to improve the performances of the xLi2MnO3·(1-x)Li M O2 composites, the inherent drawbacks of Li2MnO3 component have not been, and cannot, overcome. Here we introduce Li2MoO3 with disordered NaFeO2 structure (R-3m) as a prospective alternation of Li2MnO3 for designing novel Li-rich cathode materials xLi2 M ´O3·(1-x)Li M O2. In this report, the structural transition and charge compensation of Li2MoO3 during the initial charge and discharge were investigated with STEM and synchrotron in situ XRD and XAS techniques. It is shown that, during the initial delithiation, solid-solution reaction and two-phase reaction (slipped O3 → faulted O1) go in series due to charge compensation from Mo4+ ions in both the Mo-O and Mo-Mo covalent bonds in the Mo3O13 cluster accompanied with the Mo ion migration from Li-2Mo layer to Li layer. In the subsequent lithiation, its structure is recovered to a Li-insufficient O3 type Li2-x MoO3 (x = 0.50) due to the incomplete reduction of Mo6+ ions and the nearly reversible migration of the Mo ions at the end of lithiation. Unlike the irreversible oxygen release in deeply delithiated Li2MnO3, the O K-edge soft XAS of Li2MoO3 illustrates that oxidation of O2- to O(2-σ )- is nearly reversible and is required dynamically rather than thermodynamically. These features make Li2MoO3 a promising superior alternate in constructing novel Li-rich cathode material with improved structural stability and easy charge compensation. In addition, the contribution of Mo-Mo covalent bond seems to help to maintain the framework of the electrode material by hindering the loss of oxygen. Therefore, the basic findings in this work will also bring new insight on understanding the performance decay and searching for new ways to improve the performance of the conventional xLi2MnO3·(1-x)Li M O2materials. Acknowledgements This work was financially supported by the National Natural Science Foundation (No. 51372268) of China and the National 973 Program of China (2009CB 220100). The work at Brookhaven National Lab. was supported by the U.S. Department of Energy, the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies under Contract No. DEAC02-98CH10886.

Unveiling the Role of Oxygen Vacancy in Li2MnO3 Upon Delithiation

Oxygen vacancy in Li-rich Mn-based cathode materials: origination, influence, regulation and characterization

Atomic structure of Li2MnO3 after partial delithiation and re-lithiation

Dynamic structural evolution of oxygen vacancies in lithium rich layered composites cathodes for Li-ion batteries

Substantial Oxygen Loss and Chemical Expansion in Lithium-Rich Layered Oxides at Moderate Delithiation

Modulating Local Electronic Structure Enhances Superior Electrochemical Activity in Li-Rich Oxide Cathodes

Defect Physics, Delithiation Mechanism, and Electronic and Ionic Conduction in Layered Lithium Manganese Oxide Cathode Materials

Persistent and partially mobile oxygen vacancies in Li-rich layered oxides

Structural Transition and Charge Compensation During the Initial Delithiation and Lithiation of Li2MoO3

Synergistic Effect of Mn3+ Formation-Migration and Oxygen Loss on the Near Surface and Bulk Structural Changes in Single Crystalline Lithium-Rich Oxides

Origin of oxygen-redox and transition metals dissolution in Ni-rich LixNi0.8Co0.1Mn0.1O2 cathode

Probing the Degradation Mechanism of Li2mno3 Cathode for Li-Ion Batteries

Unraveling Oxygen Evolution in Li-Rich Oxides: A Unified Modeling of the Intermediate Peroxo/Superoxo-like Dimers

Molybdenum Substitution for Improving the Charge Compensation and Activity of Li2MnO3

First-principles Study of Mn Antisite Defect in Li2MnO3

The Influence of Li Deficiency: an Overlooked Factor That Determines the Anion Redox Reversibility of Mn-based Layered Oxide Cathodes

Unveiling the mechanism of charge compensation in Li2RuxMn1−xO3 by tracking atomic structural evolution

Insight into the Role of Metal-Oxygen Bond and O 2p Hole in High-Voltage Cathode Linixmn2-Xo4

Doping Li-rich cathode material Li$_2$MnO$_3$: Interplay between lattice site preference, electronic structure, and delithiation mechanism

Unraveling the Role of Surficial Oxygen Vacancies in Stabilizing Li‐Rich Layered Oxides

Regulating the Unhybridized O 2p Orbitals of High‐Performance Li‐Rich Mn‐Based Layered Oxide Cathode by Gd‐Doping Induced Bulk Oxygen Vacancies