Abstract:Stay cables are critical components in bridges. However, stay cables suffer from severe fatigue damage. Therefore, a monitoring technique to obtain the time history of the tension in stay cables is important. Because the acceleration of stay cables is readily measurable, approaches to identify cable tension based on frequency analysis and monitored cable acceleration have been widely investigated and used in practice. However, this type of approach can only identify a time-invariant tension of a stay cable over a specified duration, not the time-varying tension. This paper proposes an approach to identify the time-varying tension of stay cables by monitoring cable accelerations. The tension variation in stay cables is caused by vehicles passing over the bridge. The real-time identification algorithm that determines the time-varying tension of stay cables is proposed using an extended Kalman filter based on both the transversal monitored acceleration at a single location on the cable and the monitored wind speed on the bridge, where the time-varying tension is a state variable that is identified. A stay cable from the Nanjing Yangtze River No. 3 Bridge was used for the numerical study. The time-varying tension of the stay cable can be identified when either a single vehicle or multiple vehicles pass over the bridge. The robustness of the proposed approach is also investigated through deviations in the initial tension, initial displacement, and velocity of the stay cable. An experiment was conducted on a scaled stay cable with time-varying tension excited by wind. The time-varying cable tension of the cable was identified by the proposed approach and compared with the real time-varying cable tension. The identification accuracy and robustness of the proposed approach is verified through the experiment and numerical study. Copyright (c) 2013 John Wiley & Sons, Ltd.

Electromechanical Impedance‐based Ice Detection of Stay Cables with Temperature Compensation

Prediction of the aerodynamic instability of ice-accreted bridge cables using different stability criteria

Development of Elasto-Magneto-Electric (eme) Sensor for In-Service Cable Force Monitoring

EME sensors for total stress monitoring of steel cables *

Smart Elasto-Magneto-Electric (EME) Sensors for Stress Monitoring of Steel Cables: Design Theory and Experimental Validation.

Ice monitoring of aluminum conductor steel-reinforced cables using guided waves

A simple carbon fiber heating wire design method for preventing ice accretion on stay cables

Stay Cable Anti icing Technologies Developments

Research on Monitoring Method for Ice-Covered State of Transmission Lines Based on Conductor End Displacement

APPLICATION OF EM STRESS SENSORS IN LARGE STEEL CABLES

Early Warning for Abnormal Cable Forces of Cable-Stayed Bridges Considering Structural Temperature Changes

The critical anti-icing power study of the stayed-cable cylindrical structure based on positive temperature coefficient (PTC) electrothermal film with low Curie temperature

Electromechanical ice protection system: de-icing capability prediction considering impedance matching effect

Experimental and Numerical Studies on A Test Method for Damage Diagnosis of Stay Cables

Ice structure monitoring with an optical fiber sensing system

Deep hybrid neural network-aided electromechanical impedance method for automated damage detection of lining concrete under freeze-thaw cycling

Investigation of the Temperature Actions of Bridge Cables Based on Long-Term Measurement and the Gradient Boosted Regression Trees Method

Data-driven Methods for Predicting the Representative Temperature of Bridge Cable Based on Limited Measured Data

Real-time quantitative evaluation on the cable damage of cable-stayed bridges using the correlation between girder deflection and temperature

Design and Research on Impact Deicing Mechanism of Cable Climbing Robot

Real-time Identification of Time-Varying Tension in Stay Cables by Monitoring Cable Transversal Acceleration