Abstract:Due to the blockage effects in the flow, hydrodynamic performances of a ship in confined waterways are significantly different from those in deep waters. In particular, the hydrodynamic interactions between ship hull and sea bottom or bank wall in the vicinity tend to be more complicated. This gives rise to notable increases in hydrodynamic forces on the hull, along with more pronounced dynamic sinkage and trim where the ship squat phenomenon occurs. The predictions of hydrodynamic forces and ship squat are of great importance from the safe navigation point of view and are also challenging because of the remarkable viscous effects and flow separations in confined waters. In this paper, an unsteady Reynolds-Averaged Navier Stokes (URANS) solver is applied to simulate the viscous flows around a tanker and a container ship in a confined canal, which is characterized by both shallow sea bottom and close side bank. In each case, the ship is moving along a straight course. The free surface elevation caused by the ship motion is captured by the Volume of Fluid method. In all simulations, the ship position during the motion is updated at each time step according to the computed hydrodynamic forces acting on the hull, from which the dynamic sinkage and trim of the ship is determined. A grid dependency study is performed so as to estimate the numerical error resulted from the grid discretization. The influences of water depth, ship-to-bank distance, ship speed and ship hull form on the hydrodynamic forces and squat of the ship are investigated through systematic computations. Numerical results are evaluated in combination with available experimental data. For the squat, additional data from a mathematical model are used for comparison. The hydrodynamic performances of the ships are generally in good agreement with the data. Furthermore, the mechanisms of the shallow water effects and bank effects involved in the confined waters are analyzed from the simulated flow field around the hulls.

CFD-based Numerical Simulation of Pure Sway Tests in Shallow Water Towing Tank

Numerical Simulation on Oblique Towing Tests and Pure Yaw Tests of a Containership in Surf-Riding Condition

Direct CFD Simulation and Experimental Study on Coupled Motion Characteristics of Ship and Tank Sloshing in Waves

The Numerical Simulation of a Towing Cylinder Based on Immersed Body Boundary Method

Numerical Simulations of Viscous Flow Around the Obliquely Towed KVLCC2M Model in Deep and Shallow Water

Numerical Predictions of Hydrodynamic Forces and Squat of Ships in Confined Waters

Numerical Study on Ship Motion Fully Coupled with LNG Tank Sloshing in CFD Method

Numerical Research on Effect of Sloshing on Ship Roll Motion

Numerical Simulation of Sloshing Waves Based on the Finite Element Method

Computational fluid dynamics (CFD) prediction of bank effects including verification and validation

Numerical studies of coupling effects between liquid sloshing and ship motions

Numerical Simulation of Ship Motion Fully Coupled with Sloshing Tanks by Naoe-Foam-sjtu Solver

Numerical Simulation of Ship Maneuvering Motions in Viscous Flow

CFD Investigation on the Hydrodynamic Loads and Motions when Ship Maneuvers in Regular and Irregular Waves

Numerical Simulation of Ship Yaw Maneuvering in Deep and Shallow Water

Numerical Studies on Sloshing in Rectangular Tanks Using a Tree-Based Adaptive Solver and Experimental Validation

Numerical Study on Hydrodynamic Forces and Course Stability of a Ship in Surf-Riding Condition Based on Planar Motion Mechanism Tests

Numerical Simulation of Two Degrees Coupled Sloshing of Distributed Liquid Tanks in Ships

Simulation of Tank Sloshing Based on OpenFOAM and Coupling with Ship Motions in Time Domain

Numerical study of viscous hydrodynamic forces on a ship navigating near bank in shallow water

Side Wall Effects on Ship Model Testing in a Towing Tank