Abstract:Photoelectrochemical water splitting, consisting of photoanode and photocathode used for water reduction and oxidation, is a potential route to store the solar energy into chemical fuels. In terms of the required earth abundance, cheapness and proper band gap edges (1.12 eV), silicon is an attractive photoelectrode material. Unfortunately, silicon suffered from the instability and low efficiency due to the severe photocorrosion and passivation in the reaction electrolyte, even though limited performance has been achieved for water splitting development. [1-3]. In this work, in order to enhance the stability and photoelectrochemical efficiency, we fabricated silicon-based sandwich photoelectrodes with mediated protection layer of sputtered Molybdenum thin film, which is covered with hand-sprayed MoS2 as the catalyst, as shown in the fig. 1(a). The samples are marked with a, b, c and d separately after different thermal annealing time of 0h, 1h, 2h, 3h in the static Nitrogen atmosphere. After proper annealing, the formed nanoporous surficial structure could be observed in the SEM images (fig. 1(b)) with pore diameters ranging from 10 to 50 nm. These porous networks offer much more active sites for water splitting. The effect of annealing temperature on optical response is shown in fig. 2(a). The UV-Vis spectra show that the annealed surficial MoS2 exhibits extended optical responses to the longer wavelength region, indicating the potential enhanced visible light absorption. What’s more, in the photoluminescence (PL) spectra (Fig. 2(b)), the weaker PL intensity are observed after covering MoS2 on the top surface of Mo and essential annealing process, suggesting the suppressed recommendation of the photoexcited electrons and holes in the interface and therefore improved solar energy conversion. In conclusion, the silicon-based sandwich photoelectrode with enhanced visible light absorption and conversion is fabricated through facile processes. This novel low-cost silicon-based photoelectrode possess potential enhanced efficiency and stability applied in the photoelectrochemical water splitting system. Acknowledgments: The authors gratefully acknowledge the financial support from Norwegian Research Council FRINATEK programme (231416/F20), and China Scholarship Council (CSC, Grant No.201506930002). The Research Council of Norway is acknowledged for the support to the NorFab, project number 245963/F50. References [1] M. J. Kenney, M. Gong, Y. Li, J. Z. Wu, J. Feng, M. Lanza, H. Dai, Science, 343 (6160), 836-840 (2013). [2] S. Hu, M. R. Shaner, J. A. Beardslee, M. Lichterman, B. S. Brunschwig, N. S. Lewis, Science, 344 (6187), 1005-1009 (2014). [3] J. Feng, M. Gong, M. J. Kenney, J., Z. Wu, B. Zhang, Y. Li, H. Dai, Nano Res., 8 (5), 1577–1583 (2015). Figure 1

A Hierarchical Dual-Phase Photoetching Template Route to Assembling Functional Layers on Si Photoanode with Tunable Nanostructures for Efficient Water Splitting

Cascading Interfaces Enable N-Si Photoanode for Efficient and Stable Solar Water Oxidation.

An Interface‐cascading Silicon Photoanode with Strengthened Built‐in Electric Field and Enriched Surface Oxygen Vacancies for Efficient Photoelectrochemical Water Splitting

High‐Performance Si Photocathode Enabled by Spatial Decoupling Multifunctional Layers for Water Splitting

Design and Fabrication of an Α-Fe2o3/tio2/si 3D Hierarchical Photoanode for Improved Photoelectrochemical Water Splitting

Silicon Photoanode Modified with Work-function-tuned Ni@FeyNi1-y(OH)2 Core-Shell Particles for Water Oxidation.

Silicon Photoanodes Partially Covered By Ni@Fe Core-Shell Particles With In Situ Formed Gradient-Enhanced Junction Electric Field For Photoelectrochemical Water Oxidation

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

Realizing Highly Efficient Photoelectrochemical Performance for Vertically Aligned 2D ZnIn2S4 Array Photoanode Via Controlled Facet and Phase Modulation

Synergistic Effects of Dual-Electrocatalyst FeOOH/NiOOH Thin Films As Effective Surface Photogenerated Hole Extractors on a Novel Hierarchical Heterojunction Photoanode Structure for Solar-Driven Photoelectrochemical Water Splitting

Heterojunction nanochannel arrays based on SiC Core–TiO2 shell for efficiently enhanced photoelectrochemical water splitting

Silicon-based heterojunction photoanodes modified with copper-bipyridine catalyst for enhanced solar-driven water splitting

Manipulating the Interfacial Energetics of N-Type Silicon Photoanode for Efficient Water Oxidation.

Facile Fabrication of Organic/inorganic Nanotube Heterojunction Arrays for Enhanced Photoelectrochemical Water Splitting.

High‐Performance and Stable Silicon Photoanode Modified by Crystalline Ni@ Amorphous Co Core‐Shell Nanoparticles

Metal Silicidation in Conjunction with Dopant Segregation: A Promising Strategy for Fabricating High-Performance Silicon-Based Photoanodes

Si/Pedot Hybrid Core/Shell Nanowire Arrays As Photoelectrodes For Photoelectrochemical Water-Splitting

(Invited) Functional Nanostructures for Highly Efficient Photoelectrochemical Water Splitting

Silicon Photoanodes Partially Covered by Ni@Ni(Oh)(2) Core-Shell Particles for Photoelectrochemical Water Oxidation

Effective Silicon Nanowire Arrays/wo3 Core/shell Photoelectrode for Neutral Ph Water Splitting

Stable Silicon-Based Sandwich Photoelectrode for Efficient Solar Hydrogen Evolution