Abstract:Heterogeneous electrocatalytic reactions only occur at the interface between the electrocatalyst and reactant. Therefore, the active sites are only necessary to be distributed on the surface of the electrocatalyst. Based on this motivation, here, we demonstrate a systematic study on surface tuning for a carbon-based electrocatalyst from metal-free (with the heteroatoms N and S, NS/C) to metal-containing surfaces (with Co, N, and S, CoNS/C). The CoNS/C electrocatalyst was obtained by pyrolyzing the Co precoordinated and p-toluenesulfonate-doped polypyrrole (PPy). It was found that the coordination of Co on the PPy ring tuned the final carbon electrocatalyst into a catalyst with a CoNx moiety-rich surface. In addition, the as-synthesized CoNS/C was determined to have a very high loading of cobalt up to 2.02 wt %. The pyrolysis of the cobalt-containing precursor tends to proceed toward a characteristic of a higher sp2 carbon content, a higher surface area, and more nitrogen as well as active nitrogen sites than its metal-free counterpart. The most distinguished feature for such a catalyst is that the truly most active component is only distributed on the surface, in contrast with that of the conventional metal–N-based catalyst present throughout the bulky structure. Especially, the electrocatalytic activity toward oxygen evolution reaction (OER) has been investigated experimentally and theoretically. The results showed that the OER performance of the carbon-based electrocatalyst was remarkably boosted after the introduction of Co with an overpotential decrease from 678 to 345 mV at 10 mA cm–2. Furthermore, CoNS/C displayed an excellent durability upon a long-term measurement. The apparent activation energy measurements revealed that the metal-rich surface contributed to overcome the energy barrier for OER. In addition, density functional theory calculations have been conducted to explain the correlated OER mechanism. This study is expected to provide an effective strategy for the design and the synthesis of highly active metal–nitrogen-type electrocatalysts with a high metal loading for various electrocatalytic reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17599?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17599</a>.Raman spectra and XRD patterns of NS/C and CoNS/C; SEM and HR-TEM images of NS/C; XPS survey spectrum of CoNS/C; TGA curves of CoNS/C and etched CoNS/C; calculated mass content of Co according to TGA; survey XPS spectrum and high-resolution C 1s, N 1s, and S 2p of NS/C; N2 sorption isotherms and BJH desorption pore size distributions of NS/C and CoNS/C; RRDE measurement of the Co–PPy electrode toward OER; LSV curves of CoNS/C electrocatalysts synthesized with various temperatures toward OER; content of N determined using XPS spectra in CoNS/C with different pyrolysis temperatures; fitted parameters for EIS results; LSV curves of CoNS/C and etched CoNS/C toward OER; summary of the overpotentials of the various electrodes at 10 mA cm–2; temperature-dependent LSV curves of the corresponding fittings of activation energy of NS/C, CoNS/C, and RuO2 toward OER; ADT tests of NS/C toward OER; SEM image of CoNS/C and NS/C after the ADT test; survey XPS spectrum and high-resolution N 1s and Co 2p of CoNS/C after the test; DFT calculations; and summary of the OER activity comparison for recent various advanced non-precious-metal-based electrocatalysts (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17599/suppl_file/am0c17599_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Reactive Template-Derived CoFe/N-Doped Carbon Nanosheets As Highly Efficient Electrocatalysts Toward Oxygen Reduction, Oxygen Evolution, and Hydrogen Evolution

Co-modified Ni/N-doped Carbon As Electrocatalysts for HER and OER

N-Doped porous carbon nanosheets decorated with graphitized carbon layer encapsulated Co9S8 nanoparticles: an efficient bifunctional electrocatalyst for the OER and ORR

Fe 3 C‐Co Nanoparticles Encapsulated in a Hierarchical Structure of N‐Doped Carbon as a Multifunctional Electrocatalyst for ORR, OER, and HER

Coupling Hierarchical Ultrathin Co Nanosheets With N-Doped Carbon Plate as High-Efficiency Oxygen Evolution Electrocatalysts

An advanced hollow bimetallic carbide/nitrogen-doped carbon nanotube for efficient catalysis of oxygen reduction and hydrogen evolution and oxygen evolution reaction

Co9S8 Nanoparticles-Embedded N/S-Codoped Carbon Nanofibers Derived from Metal-Organic Framework-Wrapped CdS Nanowires for Efficient Oxygen Evolution Reaction

Encapsulation of Fe Nanoparticles into an N-doped Carbon Nanotube/nanosheet Integrated Hierarchical Architecture As an Efficient and Ultrastable Electrocatalyst for the Oxygen Reduction Reaction.

Metal-Organic Framework-Derived NiS/Fe3O4 Heterostructure-Decorated Carbon Nanotubes As Highly Efficient and Durable Electrocatalysts for Oxygen Evolution Reaction

Surface Tuning to Promote the Electrocatalysis for Oxygen Evolution Reaction: From Metal-Free to Cobalt-Based Carbon Electrocatalysts

Co9 S8 Nanoparticles-Embedded N/S-Codoped Carbon Nanofibers Derived from Metal-Organic Framework-Wrapped CdS Nanowires for Efficient Oxygen Evolution Reaction

N-doped CNTs Capped with Carbon Layer Armored CoFe Alloy As Highly Stable Bifunctional Catalyst for Oxygen Electrocatalysis

Heterogeneous CoFe–Co8FeS8 Nanoparticles Embedded in CNT Networks As Highly Efficient and Stable Electrocatalysts for Oxygen Evolution Reaction

NiFe Layered Double Hydroxide Nanosheets Anchored on Cobalt Nanocrystal Matrixes as Electrocatalysts for Oxygen Evolution

In-situ Coupling FeN Nanocrystals with Fe/Fe3C Nanoparticles to N-doped Carbon Nanosheets for Efficient Oxygen Electrocatalysis

Fe/N Co-Doped Hierarchically Porous Carbon on N-doped Carbon Nanotubes Towards Oxygen Reduction Reaction

Metal-Organic-Framework-Derived Co2 P Nanoparticle/Multi-Doped Porous Carbon As a Trifunctional Electrocatalyst.

Engineering Co/Co2P Mott-Schottky heterostructure encased in hollow N-doped carbon polyhedron as an advanced nanoreactor towards high-efficiency electrocatalytic oxygen evolution

Co nanoislands activated Co,N-doped porous carbon nanospheres for highly efficient and durable oxygen electrocatalyst

Two-Dimensional Fe-N-C Nanosheets for Efficient Oxygen Reduction Reaction

Three-dimensional porous g-C 3 N 4 nanosheet, CNT and ZIF-8@ZIF-67-derived carbon nanoarchitecture composite as oxygen reduction electrocatalyst